mikejp

Members
  • Posts

    234
  • Joined

  • Last visited

Converted

  • Gender
    Male
  • Location
    IOWA

mikejp's Achievements

Explorer

Explorer (4/14)

0

Reputation

  1. Check this out... http://www.ufsexplorer.com/download_stdr.php I got over 90% recovery when I did the same thing to my TV share, which spanned 7 drives. YMMV
  2. http://www.newegg.com/Product/Product.aspx?Item=11-219-038
  3. Is your pro.key file in the config directory on your flash drive?
  4. Nothing gets changed until the very end when it asks you to change values, and then confirm. You are safe. For what it's worth I re-downloaded the txt file in the first post, and using notepad I did a search and replace of /root/mdcmd to the new path, saved it to my flash drive and then ran the script. ...and what is the "new path" ? Can the author modify this Script for v6.1.4 please? Thanks http://lime-technology.com/forum/index.php?topic=29009.msg402678#msg402678
  5. I have the same board... with the same problem. From what I found here, https://bbs.archlinux.org/viewtopic.php?id=163102, the solution is run BIOS v1.80. I've not tried it though, I'm on v1.15... I used a different server to run my VMs on. Good luck!
  6. http://go.microsoft.com/fwlink/p/?LinkId=522144
  7. If the specs on your motherboard are correct... You might try updating the bios. http://www.gigabyte.com/products/product-page.aspx?pid=3237#bios
  8. boot order get changed in the bios somehow?
  9. make_bootable.bat ran as administrator?
  10. After I made sure all updates had been applied I re-enabled the page update... Been up, with no problems, for 20hr. 18min Don't know what the problem was... I can't reproduce it now on any of my servers...
  11. Will do... it will be later today before I get back to my server location.
  12. I had to disable page update frequency under Display Settings to keep my webgui working... Before that, it might last an hour or so before becoming totally unresponsive. Been up with no problems since (10days) YMMV
  13. This worked for me... http://lime-technology.com/forum/index.php?topic=35544.msg331110#msg331110