CHBMB Posted May 24, 2015 Share Posted May 24, 2015 Hey Bungy, This has been working great, any chance of an update to V15 now it's in stable? Thanks Quote Link to comment
johnodon Posted May 24, 2015 Share Posted May 24, 2015 Not sure what I am doing wrong but I can't connect to the nzbget gui after install. Here is the docker log: 2015-05-24 08:46:14,464 CRIT Set uid to user 0 2015-05-24 08:46:14,464 WARN Included extra file "/etc/supervisor/conf.d/nzbget.conf" during parsing 2015-05-24 08:46:14,468 INFO supervisord started with pid 1 2015-05-24 08:46:15,471 INFO spawned: 'nzbget' with pid 7 2015-05-24 08:46:15,472 INFO spawned: 'start' with pid 8 2015-05-24 08:46:15,495 DEBG 'start' stdout output: [info] VPN provider defined as pia 2015-05-24 08:46:15,496 INFO success: nzbget entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2015-05-24 08:46:15,496 INFO success: start entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2015-05-24 08:46:15,500 DEBG 'start' stdout output: [info] VPN provider remote and port defined as us-east.privateinternetaccess.com 1194 2015-05-24 08:46:15,510 DEBG 'nzbget' stderr output: /data/dst/nzbget.log: No such file or directory /data/dst/nzbget.log: No such file or directory /data/dst/nzbget.log: No such file or directory /data/dst/nzbget.log: No such file or directory /data/dst/nzbget.log: No such file or directory 2015-05-24 08:46:15,510 DEBG 'nzbget' stdout output: nzbget.conf(49): Invalid value for option "InterDir" (/data/inter/): could not create directory /data/inter: nzbget.conf(70): Invalid value for option "TempDir" (/data/tmp/): could not create directory /data/tmp: nzbget.conf(67): Invalid value for option "QueueDir" (/data/queue/): could not create directory /data/queue: nzbget.conf(61): Invalid value for option "NzbDir" (/data/nzb/): could not create directory /data/nzb: 2015-05-24 08:46:15,511 DEBG fd 8 closed, stopped monitoring (stderr)> 2015-05-24 08:46:15,511 DEBG fd 6 closed, stopped monitoring (stdout)> 2015-05-24 08:46:15,511 INFO exited: nzbget (exit status 0; expected) 2015-05-24 08:46:15,511 DEBG received SIGCLD indicating a child quit 2015-05-24 08:46:15,515 INFO reaped unknown pid 19 2015-05-24 08:46:15,516 DEBG received SIGCLD indicating a child quit 2015-05-24 08:46:15,670 DEBG 'start' stdout output: [info] ip route 2015-05-24 08:46:15,671 DEBG 'start' stdout output: default via 172.17.42.1 dev eth0 8.8.4.4 via 172.17.42.1 dev eth0 8.8.8.8 via 172.17.42.1 dev eth0 64.237.0.0/16 via 172.17.42.1 dev eth0 66.55.0.0/16 via 172.17.42.1 dev eth0 108.61.0.0/16 via 172.17.42.1 dev eth0 2015-05-24 08:46:15,671 DEBG 'start' stdout output: 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.6 208.167.0.0/16 via 172.17.42.1 dev eth0 2015-05-24 08:46:15,671 DEBG 'start' stdout output: -------------------- 2015-05-24 08:46:15,704 DEBG 'start' stdout output: [info] iptables 2015-05-24 08:46:15,705 DEBG 'start' stdout output: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT DROP -A INPUT -i tun0 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1194 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 6789 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 6789 -j ACCEPT -A INPUT -p udp -m udp --sport 53 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1194 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 6789 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 6789 -j ACCEPT -A OUTPUT -p udp -m udp --dport 53 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT 2015-05-24 08:46:15,705 DEBG 'start' stdout output: -------------------- 2015-05-24 08:46:15,706 DEBG 'start' stdout output: [info] nameservers 2015-05-24 08:46:15,706 DEBG 'start' stdout output: nameserver 8.8.8.8 nameserver 8.8.4.4 2015-05-24 08:46:15,707 DEBG 'start' stdout output: -------------------- 2015-05-24 08:46:15,707 DEBG 'start' stdout output: [info] Starting OpenVPN... 2015-05-24 08:46:15,714 DEBG 'start' stdout output: Sun May 24 08:46:15 2015 OpenVPN 2.3.6 x86_64-unknown-linux-gnu [sSL (OpenSSL)] [LZO] [EPOLL] [MH] [iPv6] built on Dec 2 2014 Sun May 24 08:46:15 2015 library versions: OpenSSL 1.0.2 22 Jan 2015, LZO 2.09 2015-05-24 08:46:15,714 DEBG 'start' stdout output: Sun May 24 08:46:15 2015 WARNING: file 'credentials.conf' is group or others accessible 2015-05-24 08:46:15,741 DEBG 'start' stdout output: Sun May 24 08:46:15 2015 UDPv4 link local: [undef] Sun May 24 08:46:15 2015 UDPv4 link remote: [AF_INET]108.61.68.157:1194 2015-05-24 08:46:15,764 DEBG 'start' stdout output: Sun May 24 08:46:15 2015 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this 2015-05-24 08:46:16,042 DEBG 'start' stdout output: Sun May 24 08:46:16 2015 [Private Internet Access] Peer Connection Initiated with [AF_INET]108.61.68.157:1194 2015-05-24 08:46:18,146 DEBG 'start' stdout output: Sun May 24 08:46:18 2015 TUN/TAP device tun0 opened Sun May 24 08:46:18 2015 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Sun May 24 08:46:18 2015 /usr/bin/ip link set dev tun0 up mtu 1500 2015-05-24 08:46:18,148 DEBG 'start' stdout output: Sun May 24 08:46:18 2015 /usr/bin/ip addr add dev tun0 local 10.128.1.6 peer 10.128.1.5 2015-05-24 08:46:18,154 DEBG 'start' stdout output: Sun May 24 08:46:18 2015 Initialization Sequence Completed Something weird...if I look at my cache drive where I keep my docker configs, the only thing I see there relevant to nzbget is the conf file. Should there be more? Any ideas? John Quote Link to comment
Bungy Posted May 24, 2015 Author Share Posted May 24, 2015 Hey Bungy, This has been working great, any chance of an update to V15 now it's in stable? Thanks I triggered a new build, which should update the nzbget daemon to v15. The build is pushing now so it should be done shortly. Quote Link to comment
Bungy Posted May 24, 2015 Author Share Posted May 24, 2015 John, it looks like something is wrong with the /data volume mapping. Where did you set up /data to map to? Quote Link to comment
johnodon Posted May 24, 2015 Share Posted May 24, 2015 Yeah...my bad. Squared away now. Thanks! Quote Link to comment
Bungy Posted May 24, 2015 Author Share Posted May 24, 2015 Yeah...my bad. Squared away now. Thanks! Whew! I'm glad it worked out for you! Quote Link to comment
CHBMB Posted May 24, 2015 Share Posted May 24, 2015 Hey Bungy, This has been working great, any chance of an update to V15 now it's in stable? Thanks I triggered a new build, which should update the nzbget daemon to v15. The build is pushing now so it should be done shortly. Thanks Bungy. Quote Link to comment
johnodon Posted May 24, 2015 Share Posted May 24, 2015 Just thinking out loud here... What is the benefit of using NZB with VPN? Just an extra layer of protection (whether needed or not)? I understand the need for torrents but most news providers are anon and SSL John Quote Link to comment
Bungy Posted May 24, 2015 Author Share Posted May 24, 2015 Just thinking out loud here... What is the benefit of using NZB with VPN? Just an extra layer of protection (whether needed or not)? I understand the need for torrents but most news providers are anon and SSL John Yep, just for the extra layer of protection. Quote Link to comment
johnodon Posted May 24, 2015 Share Posted May 24, 2015 BTW...v15 working beautifully. Quote Link to comment
NOX6 Posted June 4, 2015 Share Posted June 4, 2015 I just tried the openhab docker and get an error when browsing to the webui on port 8081: -- HTTP ERROR 500 Problem accessing /openhab.app. Reason: Sitemap 'default' could not be found Caused by: org.openhab.ui.webapp.render.RenderException: Sitemap 'default' could not be found -- Here is how it is configured: Container volume - Host path /etc/openhab - /mnt/cache/appdata/openhab/config /etc/localtime - /etc/localtime Container port - Host port 8080 - 8081 (because I also have the sab docker on 8080) Is there additional configuration I need to do in order to have it spin up? thanks, Quote Link to comment
NOX6 Posted June 4, 2015 Share Posted June 4, 2015 So it looks like I need to have a sitemap configured before launching the webui. I see from their documentation that there is a demo sitemap that can be installed and launched with http://tower:8081/openhab.app?sitemap=demo That url also gives me an error, could it be that I also need to install the demo sitemap somehow? thanks, Quote Link to comment
Bungy Posted June 4, 2015 Author Share Posted June 4, 2015 Yeah, if you specify the config directory mapping, then it expects you to provide all the configurations. If you remove the mapping, it should load the demo configuration. Otherwise, you can manually load it using the demo files found here (https://openhab.ci.cloudbees.com/job/openHAB/) Hope that helps! Quote Link to comment
NOX6 Posted June 5, 2015 Share Posted June 5, 2015 So I am thinking through how openhab would work for me. Just say I get a house full of Z-Wave devices. That requires a controller to make them work, say the usb Z-Stick thing. What would the usb Z-Wave controller plug into? Plug into the tower server and then somehow pass this through to the openhab docker? Thanks for any guidance on how to architect this Quote Link to comment
Bungy Posted June 5, 2015 Author Share Posted June 5, 2015 Yep exactly. You would make openhab a privileged server and share the USB drives. I currently do this using my mochad docker, which communicates with a USB x10 controller. Quote Link to comment
meep Posted June 10, 2015 Share Posted June 10, 2015 Bungy Many thanks of Mochad. I'd started rolling my own CM15 solution under a windows VM but this is altogether more efficient. Great work. Peter Quote Link to comment
Bungy Posted June 10, 2015 Author Share Posted June 10, 2015 Awesome. I'm glad people are using it. I didn't expect that one to get any traction and kinda just built it for myself. What controller software are you using? I haven't found anything that handles RF dimming gracefully. I had to write my own modifications to the openhab mochad binding, and these changes still haven't found their way into the master branch. Quote Link to comment
Ice_Black Posted June 24, 2015 Share Posted June 24, 2015 Is there any chance you could downgrade Python from version 3 to 2 on Nzbgetvpn? I use some scripts in Nzbget like Subliminal and VideoSort, it is not compatible with Python 3. Thanks Quote Link to comment
xvonabur Posted June 29, 2015 Share Posted June 29, 2015 Hello! Could anyone help me? Gitlab from this repo doesn't start or at least I doesn't see GUI (Chrome says ERR_CONNECTION_REFUSED). Giltlab log: debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype Creating SSH2 RSA key; this may take some time ... Creating SSH2 DSA key; this may take some time ... Creating SSH2 ECDSA key; this may take some time ... Creating SSH2 ED25519 key; this may take some time ... invoke-rc.d: policy-rc.d denied execution of restart. SSL keys and certificates were not found. Assuming that the container is running behind a HTTPS enabled load balancer. Waiting for database server to accept connections Setting up GitLab for firstrun. Please be patient, this could take a while... gitlabhq_production already exists Migrating database... Compiling assets. Please be patient, this could take a while... Starting supervisord... 2015-06-29 08:25:57,247 CRIT Supervisor running as root (no user in config file) 2015-06-29 08:25:57,247 WARN Included extra file "/etc/supervisor/conf.d/cron.conf" during parsing 2015-06-29 08:25:57,247 WARN Included extra file "/etc/supervisor/conf.d/nginx.conf" during parsing 2015-06-29 08:25:57,247 WARN Included extra file "/etc/supervisor/conf.d/sshd.conf" during parsing 2015-06-29 08:25:57,247 WARN Included extra file "/etc/supervisor/conf.d/unicorn.conf" during parsing 2015-06-29 08:25:57,247 WARN Included extra file "/etc/supervisor/conf.d/sidekiq.conf" during parsing 2015-06-29 08:25:57,266 INFO RPC interface 'supervisor' initialized 2015-06-29 08:25:57,266 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2015-06-29 08:25:57,267 INFO supervisord started with pid 1 2015-06-29 08:25:58,271 INFO spawned: 'sidekiq' with pid 576 2015-06-29 08:25:58,273 INFO spawned: 'unicorn' with pid 577 2015-06-29 08:25:58,275 INFO spawned: 'cron' with pid 578 2015-06-29 08:25:58,278 INFO spawned: 'nginx' with pid 579 2015-06-29 08:25:58,280 INFO spawned: 'sshd' with pid 580 2015-06-29 08:25:59,788 INFO success: sidekiq entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2015-06-29 08:25:59,788 INFO success: unicorn entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2015-06-29 08:25:59,789 INFO success: cron entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2015-06-29 08:25:59,789 INFO success: nginx entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2015-06-29 08:25:59,789 INFO success: sshd entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) I also installed Postgres and Redis from the repo. All configs are default. Postgres log: Initializing database... Creating user "gitlab"... Creating database "gitlabhq_production"... Granting access to database "gitlabhq_production" for user "gitlab"... Starting PostgreSQL server... 2015-06-29 15:24:28 UTC [1-1] LOG: could not create IPv6 socket: Address family not supported by protocol 2015-06-29 15:24:28 UTC [72-1] LOG: database system was shut down at 2015-06-29 15:24:28 UTC 2015-06-29 15:24:28 UTC [72-2] LOG: MultiXact member wraparound protections are now enabled 2015-06-29 15:24:28 UTC [1-2] LOG: database system is ready to accept connections 2015-06-29 15:24:28 UTC [76-1] LOG: autovacuum launcher started 2015-06-29 15:25:12 UTC [81-1] gitlab@postgres ERROR: database "gitlabhq_production" already exists 2015-06-29 15:25:12 UTC [81-2] gitlab@postgres STATEMENT: CREATE DATABASE "gitlabhq_production" ENCODING = 'unicode' Redis log: [1] 29 Jun 08:24:45.696 # Server started, Redis version 2.8.4 [1] 29 Jun 08:24:45.697 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect. [1] 29 Jun 08:24:45.697 * The server is now ready to accept connections on port 6379 [1] 29 Jun 08:24:45.697 * The server is now ready to accept connections at /var/run/redis/redis.sock [1] 29 Jun 08:29:46.057 * 10 changes in 300 seconds. Saving... [1] 29 Jun 08:29:46.063 * Background saving started by pid 13 [13] 29 Jun 08:29:46.079 * DB saved on disk [13] 29 Jun 08:29:46.079 * RDB: 4 MB of memory used by copy-on-write [1] 29 Jun 08:29:46.163 * Background saving terminated with success P.S. I'm using the latest Unraid 6.0.1 and 4Gb of RAM. Quote Link to comment
Bungy Posted June 30, 2015 Author Share Posted June 30, 2015 Is there any chance you could downgrade Python from version 3 to 2 on Nzbgetvpn? I use some scripts in Nzbget like Subliminal and VideoSort, it is not compatible with Python 3. Thanks I'll try to create a branch that includes python 2. I'm not sure when I"ll get to this, so if you get to it first, feel free to send me a merge request. Quote Link to comment
Bungy Posted June 30, 2015 Author Share Posted June 30, 2015 Hello! Could anyone help me? Gitlab from this repo doesn't start or at least I doesn't see GUI (Chrome says ERR_CONNECTION_REFUSED). Giltlab log: debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype Creating SSH2 RSA key; this may take some time ... Creating SSH2 DSA key; this may take some time ... Creating SSH2 ECDSA key; this may take some time ... Creating SSH2 ED25519 key; this may take some time ... invoke-rc.d: policy-rc.d denied execution of restart. SSL keys and certificates were not found. Assuming that the container is running behind a HTTPS enabled load balancer. Waiting for database server to accept connections Setting up GitLab for firstrun. Please be patient, this could take a while... gitlabhq_production already exists Migrating database... Compiling assets. Please be patient, this could take a while... Starting supervisord... 2015-06-29 08:25:57,247 CRIT Supervisor running as root (no user in config file) 2015-06-29 08:25:57,247 WARN Included extra file "/etc/supervisor/conf.d/cron.conf" during parsing 2015-06-29 08:25:57,247 WARN Included extra file "/etc/supervisor/conf.d/nginx.conf" during parsing 2015-06-29 08:25:57,247 WARN Included extra file "/etc/supervisor/conf.d/sshd.conf" during parsing 2015-06-29 08:25:57,247 WARN Included extra file "/etc/supervisor/conf.d/unicorn.conf" during parsing 2015-06-29 08:25:57,247 WARN Included extra file "/etc/supervisor/conf.d/sidekiq.conf" during parsing 2015-06-29 08:25:57,266 INFO RPC interface 'supervisor' initialized 2015-06-29 08:25:57,266 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2015-06-29 08:25:57,267 INFO supervisord started with pid 1 2015-06-29 08:25:58,271 INFO spawned: 'sidekiq' with pid 576 2015-06-29 08:25:58,273 INFO spawned: 'unicorn' with pid 577 2015-06-29 08:25:58,275 INFO spawned: 'cron' with pid 578 2015-06-29 08:25:58,278 INFO spawned: 'nginx' with pid 579 2015-06-29 08:25:58,280 INFO spawned: 'sshd' with pid 580 2015-06-29 08:25:59,788 INFO success: sidekiq entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2015-06-29 08:25:59,788 INFO success: unicorn entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2015-06-29 08:25:59,789 INFO success: cron entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2015-06-29 08:25:59,789 INFO success: nginx entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2015-06-29 08:25:59,789 INFO success: sshd entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) I also installed Postgres and Redis from the repo. All configs are default. Postgres log: Initializing database... Creating user "gitlab"... Creating database "gitlabhq_production"... Granting access to database "gitlabhq_production" for user "gitlab"... Starting PostgreSQL server... 2015-06-29 15:24:28 UTC [1-1] LOG: could not create IPv6 socket: Address family not supported by protocol 2015-06-29 15:24:28 UTC [72-1] LOG: database system was shut down at 2015-06-29 15:24:28 UTC 2015-06-29 15:24:28 UTC [72-2] LOG: MultiXact member wraparound protections are now enabled 2015-06-29 15:24:28 UTC [1-2] LOG: database system is ready to accept connections 2015-06-29 15:24:28 UTC [76-1] LOG: autovacuum launcher started 2015-06-29 15:25:12 UTC [81-1] gitlab@postgres ERROR: database "gitlabhq_production" already exists 2015-06-29 15:25:12 UTC [81-2] gitlab@postgres STATEMENT: CREATE DATABASE "gitlabhq_production" ENCODING = 'unicode' Redis log: [1] 29 Jun 08:24:45.696 # Server started, Redis version 2.8.4 [1] 29 Jun 08:24:45.697 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect. [1] 29 Jun 08:24:45.697 * The server is now ready to accept connections on port 6379 [1] 29 Jun 08:24:45.697 * The server is now ready to accept connections at /var/run/redis/redis.sock [1] 29 Jun 08:29:46.057 * 10 changes in 300 seconds. Saving... [1] 29 Jun 08:29:46.063 * Background saving started by pid 13 [13] 29 Jun 08:29:46.079 * DB saved on disk [13] 29 Jun 08:29:46.079 * RDB: 4 MB of memory used by copy-on-write [1] 29 Jun 08:29:46.163 * Background saving terminated with success P.S. I'm using the latest Unraid 6.0.1 and 4Gb of RAM. It looks like gitlab is up and running correctly. My guess is you're trying to connect to the web gui on the wrong port. Which ports did you assign to the container and what port is gitlab set to use? This is based on your environmental variable for "GITLAB_PORT" and whether you're using HTTPS ("GITLAB_HTTPS=true"). For more information, you may want to look at sameersbn's documentation (https://github.com/sameersbn/docker-gitlab). He's the one who wrote the docker container. I simply provided a template for unraid users. Quote Link to comment
Bungy Posted July 7, 2015 Author Share Posted July 7, 2015 Is there any chance you could downgrade Python from version 3 to 2 on Nzbgetvpn? I use some scripts in Nzbget like Subliminal and VideoSort, it is not compatible with Python 3. Thanks I'll try to create a branch that includes python 2. I'm not sure when I"ll get to this, so if you get to it first, feel free to send me a merge request. Ice_Black, python2.7 and python 3.4 are installed by default, but the symbolic link for python points to python 3. Can you change your scripts to use "python2" instead of "python"? Alternatively, there is a symbolic link in /usr/bin pointing python to python3. You could easily change it to point to python2 instead. unlink /usr/bin/python ln -s /usr/bin/python2 /usr/bin/python I'm happy to make a branch that has python2 as the default, but if it's easy enough to change your scripts, then I think that is the cleaner solution. Quote Link to comment
mikedpitt420 Posted July 19, 2015 Share Posted July 19, 2015 Is it possible to pass a USB ZWave controller like this: http://www.ebay.com/itm/like/261954054474?lpid=82&chn=ps to the OpenHAB docker? Quote Link to comment
Bungy Posted July 19, 2015 Author Share Posted July 19, 2015 Should work fine as long as there are drivers for it. I would check if anybody has used that controller in openhab before. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.