krunk

Fingers crossed...

I'm very sure that I'm not writing to the array, the files exist on the cache drive. I've included a screenshot from a current copy

Hi, I've got a question and I hope that somebody can help me. If I copy a couple of movies over to my UnRaid server, the first few Gb go very fast 100-125mb/s. (I have gb network in place). Then after about 15 Gb the speeds drops to 25 mb/s and doesn't pick up speed again. Setup My UnRaid 6.1.3 server has 16Gb of internal memory and a cache pool of 2 SSD drives. Processor doesn't peak or stress out, but stays at about 10%-20%. Internal memory is almost 100% used by cache, and about 1Gb is used by system. I'm copying files from a Mac mini with SSD drive and 16Gb of internal memory also. Any ideas how I can solve this?

Ok, that was it. Pre-clear and format did the trick. No more errors and the mover works like a charm Thanks you guys!

The file TreeSize.dmg is ok, was before and still is now. The movie files also work perfectly. My quess is that it's a isolated problem with the cache drive file structure. Should I run fsck, or can I format the cache drive again?

Reverted back to stock, disabled AFP, rebooted. Cleaned cache drive. Copy single file to cache drive. Ran mover. File is copied to the array, but still errors in the log and the file still exists on the cache drive. It seems that the mover can only copy and not remove the files. I've included the log file again, does it make sense to you guys? syslog-20140119-210832.txt.zip

Can you tell me which files cause Simplefeatures to load packages? I thought I removed all of the files. If you have not guessed, I'm a bit of a Linux noob, so I'm afraid to remove to many files....

Simplefeatures removed, still the same issues... I attached the log again, now there are some more errors because I enabled AFP and made a backup with timemachine syslog-20140119-171121.txt.zip

A new and complete log file syslog-20140118-091635.txt.zip

The log file syslog-20140117-201120B.txt

I've done that, no errors on the other drives/folders. EDIT, just manually emptied the cache drive by using MC. The drive is empty now, should a format of the cache drive fix it? If so, how can I do this safely?

Currently no errors on when I type: root@UnRaid:~# getfattr -d /mnt/cache/Media root@UnRaid:~# But the mover doesn't work because of these errors: Jan 17 20:26:47 UnRaid logger: ./Media/Series/The Blacklist/Season 1/The Blacklist - 1x01 - Pilot.mkv Jan 17 20:26:47 UnRaid logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.69rT2n",0) failed: Exec format error ( Jan 17 20:26:47 UnRaid logger: .d..t...... Media/Series/ Jan 17 20:26:47 UnRaid logger: >f......... Media/Series/The Blacklist/Season 1/The Blacklist - 1x01 - Pilot.mkv Jan 17 20:27:57 UnRaid logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] Jan 17 20:27:57 UnRaid logger: ./Media/Series/The Blacklist/Season 1/The Blacklist - 1x07 - Frederick Barnes.mkv Jan 17 20:27:57 UnRaid logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.69rT2n",0) failed: Exec format

The cache drive is totally empty, but when a new temporary folder is created, it's produces this error and the mover does not work anymore. For example, the media folder didn't exist but was created when copying files to UnRaid. When the mover is forced, I get this kind of errors: Jan 16 01:07:34 UnRaid logger: ./Media/Series/The Tomorrow People (US)/Season 1/The Tomorrow People (US) - 1x05 - All Tomorrow's Parties.mkv Jan 16 01:07:34 UnRaid logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.69rT2n",0) failed: Exec format error ( EDIT: I get no errors on a subfolder, only on root level of the cache drive when I type the getfattr command: root@UnRaid:~# getfattr -d /mnt/cache/Media root@UnRaid:~# getfattr -d /mnt/cache/ /mnt/cache/: user.org.netatalk.supports-eas.69rT2n: Exec format error /mnt/cache/: user.org.netatalk.supports-eas.EFC2Kt: Exec format error /mnt/cache/: user.org.netatalk.supports-eas.uaj8Hy: Exec format error root@UnRaid:~#

Strange, I copied/pasted that. A lot of shares seem to be alright, but every new folder on the cache drive had the same issues: root@UnRaid:~# getfattr -d /mnt/cache /mnt/cache: user.org.netatalk.supports-eas.69rT2n: Exec format error /mnt/cache: user.org.netatalk.supports-eas.EFC2Kt: Exec format error /mnt/cache: user.org.netatalk.supports-eas.uaj8Hy: Exec format error The server crashed when I type: root@UnRaid:~# /boot/rmattrs /mnt/cache Connection closed by foreign host. Any way to completely wipe the cache drive?

No, because I get some errors: root@UnRaid:~# getfattr bd /mnt/disk1/Media getfattr: bd: No such file or directory This disk and folder do exist: root@UnRaid:/mnt# vdir disk1/ total 5 drwxrwxrwx 17 nobody users 960 2013-12-08 17:21 Docs_Bart/ drwxrwxrwx 35 nobody users 3192 2013-11-29 21:07 Docs_Linda/ drwxrwxrwx 14 nobody users 488 2014-01-14 21:16 Media/ drwxrwxrwx 22 nobody users 888 2013-12-29 16:13 Pictures/ drwxrwxrwx 5 nobody users 120 2013-02-12 06:16 Pictures_org/ drwxrwxrwx 14 nobody users 688 2014-01-05 21:00 Programs/ drwxrwxrwx 10 nobody users 376 2014-01-08 07:05 TimeMachine/ drwxrwxrwx 9 nobody users 408 2013-11-30 01:41 iTunes/ drwxrwxrwx 2 nobody users 144 2013-11-29 01:00 iTunes_Server/ drwxrwxrwx 2 nobody users 112 2014-01-05 19:00 plex/