Cwis3man

Is there anyway to bulk import urls? or maybe format something like a YouTube playlist for downloading stuff not on youtube?

Still no update on x570 boards?

Cannot for the life of me get this Docker working, install goes well but I can never get to the WebUI. I've seen tons of posts about this same issue in this thread, but nothing I've tried thus far is working. Template Settings Docker Run docker run -d --name='pihole' --net='br0' --ip='192.168.1.5' -e TZ="America/New_York" -e HOST_OS="Unraid" -e 'TCP_PORT_53'='53' -e 'UDP_PORT_53'='53' -e 'UDP_PORT_67'='67' -e 'TCP_PORT_80'='80' -e 'TCP_PORT_443'='443' -e 'DNS1'='8.8.8.8' -e 'DNS2'='8.8.4.4' -e 'TZ'='America/New_York' -e 'WEBPASSWORD'='admin' -e 'INTERFACE'='br0' -e 'ServerIP'='192.168.1.5' -e 'ServerIPv6'='' -e 'IPv6'='False' -e 'DNSMASQ_LISTENING'='all' -v '/mnt/user/appdata/pihole/pihole/':'/etc/pihole/':'rw' -v '/mnt/user/appdata/pihole/dnsmasq.d/':'/etc/dnsmasq.d/':'rw' --cap-add=NET_ADMIN --restart=unless-stopped 'pihole/pihole:latest' 9a22a35e6fee700d3d88853be16878ed2b926cf6f15b69c053321827a4abdcc4 Log [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] 01-resolver-resolv: applying... [fix-attrs.d] 01-resolver-resolv: exited 0. [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 20-start.sh: executing... ::: Starting docker specific checks & setup for docker pihole/pihole [i] Installing configs from /etc/.pihole... [i] Existing dnsmasq.conf found... it is not a Pi-hole file, leaving alone! Converting DNS1 to PIHOLE_DNS_ Converting DNS2 to PIHOLE_DNS_ Setting DNS servers based on PIHOLE_DNS_ variable ::: Pre existing WEBPASSWORD found DNSMasq binding to custom interface: br0 Added ENV to php: "PHP_ERROR_LOG" => "/var/log/lighttpd/error.log", "ServerIP" => "192.168.1.5", "CORS_HOSTS" => "", "VIRTUAL_HOST" => "192.168.1.5", Using IPv4 ::: Preexisting ad list /etc/pihole/adlists.list detected ((exiting setup_blocklists early)) https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts https://mirror1.malwaredomains.com/files/justdomains http://sysctl.org/cameleon/hosts https://s3.amazonaws.com/lists.disconnect.me/simple_tracking.txt https://s3.amazonaws.com/lists.disconnect.me/simple_ad.txt https://hosts-file.net/ad_servers.txt ::: Testing pihole-FTL DNS: FTL started! ::: Testing lighttpd config: Syntax OK ::: All config checks passed, cleared for startup ... ::: Enabling Query Logging [i] Enabling logging... ::: Docker start setup complete Checking if custom gravity.db is set in /etc/pihole/pihole-FTL.conf Pi-hole version is v5.6 (Latest: v5.6) AdminLTE version is v5.8 (Latest: v5.8) FTL version is v5.11 (Latest: v5.11) Container tag is: 2021.10.1 [cont-init.d] 20-start.sh: exited 0. [cont-init.d] done. [services.d] starting services Starting lighttpd Starting crond Starting pihole-FTL (no-daemon) as root [services.d] done. Stopping pihole-FTL Starting pihole-FTL (no-daemon) as root Stopping pihole-FTL Starting pihole-FTL (no-daemon) as root Bridging: Enabled Host access to custom networks: Enabled What am I missing?

Same thing here - What server? CA Toronto for me

I think this is more of a linux question then anything, but worth a shot. I have an OVA file that I'd like to convert to RAW and boot via unraid. The conversion went fine, but when booting the VM I get the following error: Edit - I get the error when booting from RAW or VMDK. Here's a copy of my XML <domain type='kvm' id='26'> <name>vRanger</name> <uuid>be4ae8ca-72ed-92fb-99cd-a56a795d0c9b</uuid> <metadata> <vmtemplate xmlns="unraid" name="Linux" icon="default.png" os="linux"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='4'/> <vcpupin vcpu='1' cpuset='5'/> <vcpupin vcpu='2' cpuset='6'/> <vcpupin vcpu='3' cpuset='7'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-i440fx-1.4'>hvm</type> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='4' threads='1'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/VMs/vRanger.raw'/> <backingStore/> <target dev='hdc' bus='ide'/> <boot order='1'/> <alias name='ide0-1-0'/> <address type='drive' controller='0' bus='1' target='0' unit='0'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'> <alias name='pci.0'/> </controller> <controller type='ide' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:2c:3d:bc'/> <source bridge='br0'/> <target dev='vnet2'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/3'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/3'> <source path='/dev/pts/3'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-26-vRanger/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <graphics type='vnc' port='5902' autoport='yes' websocket='5702' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> <seclabel type='none' model='none'/> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> </domain> And here is the OVF File- <?xml version="1.0" encoding="UTF-8"?> <!--Generated by VMware ESX Server, User: root, UTC time: 2016-05-27T13:34:32.369917Z--> <Envelope vmw:buildId="build-799733" xmlns="http://schemas.dmtf.org/ovf/envelope/1" xmlns:cim="http://schemas.dmtf.org/wbem/wscim/1/common" xmlns:ovf="http://schemas.dmtf.org/ovf/envelope/1" xmlns:rasd="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_ResourceAllocationSettingData" xmlns:vmw="http://www.vmware.com/schema/ovf" xmlns:vssd="http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/CIM_VirtualSystemSettingData" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <References> <File ovf:href="vRanger-Virtual-Appliance_751-disk1.vmdk" ovf:id="file1" ovf:size="153332224"/> </References> <DiskSection> <Info>Virtual disk information</Info> <Disk ovf:capacity="10" ovf:capacityAllocationUnits="byte * 2^30" ovf:diskId="vmdisk1" ovf:fileRef="file1" ovf:format="http://www.vmware.com/interfaces/specifications/vmdk.html#streamOptimized" ovf:populatedSize="539230208"/> </DiskSection> <NetworkSection> <Info>The list of logical networks</Info> <Network ovf:name="VM Network"> <Description>The VM Network network</Description> </Network> </NetworkSection> <VirtualSystem ovf:id="vRanger-Virtual-Appliance_751"> <Info>A virtual machine</Info> <Name>vRanger-Virtual-Appliance_751</Name> <ProductSection> <Info>VA published by Dell Software Inc.</Info> <Product>vRanger Virtual Appliance</Product> <Vendor>Dell Software Inc.</Vendor> <Version>7.5.1</Version> <ProductUrl>http://software.dell.com/products/vranger/</ProductUrl> <VendorUrl>http://software.dell.com/</VendorUrl> </ProductSection> <AnnotationSection> <Info>Product description</Info> <Annotation>This virtual appliance is intended to be used with vRanger Backup and Replication software. It facilitates Replication, Backup, Restore, and Linux File Level Restore features. An instance of this virtual appliance must be deployed to each ESX or ESXi host that is involved in replication. The default root password is &apos;vzroot1&apos;.</Annotation> </AnnotationSection> <OperatingSystemSection ovf:id="100" vmw:osType="other26xLinux64Guest"> <Info>The kind of installed guest operating system</Info> </OperatingSystemSection> <VirtualHardwareSection> <Info>Virtual hardware requirements</Info> <System> <vssd:ElementName>Virtual Hardware Family</vssd:ElementName> <vssd:InstanceID>0</vssd:InstanceID> <vssd:VirtualSystemIdentifier>vRanger-Virtual-Appliance_751</vssd:VirtualSystemIdentifier> <vssd:VirtualSystemType>vmx-08</vssd:VirtualSystemType> </System> <Item> <rasd:AllocationUnits>hertz * 10^6</rasd:AllocationUnits> <rasd:Description>Number of Virtual CPUs</rasd:Description> <rasd:ElementName>1 virtual CPU(s)</rasd:ElementName> <rasd:InstanceID>1</rasd:InstanceID> <rasd:ResourceType>3</rasd:ResourceType> <rasd:VirtualQuantity>1</rasd:VirtualQuantity> </Item> <Item> <rasd:AllocationUnits>byte * 2^20</rasd:AllocationUnits> <rasd:Description>Memory Size</rasd:Description> <rasd:ElementName>1024MB of memory</rasd:ElementName> <rasd:InstanceID>2</rasd:InstanceID> <rasd:ResourceType>4</rasd:ResourceType> <rasd:VirtualQuantity>1024</rasd:VirtualQuantity> </Item> <Item> <rasd:Address>0</rasd:Address> <rasd:Description>SCSI Controller</rasd:Description> <rasd:ElementName>SCSI Controller 0</rasd:ElementName> <rasd:InstanceID>3</rasd:InstanceID> <rasd:ResourceSubType>lsilogic</rasd:ResourceSubType> <rasd:ResourceType>6</rasd:ResourceType> <vmw:Config ovf:required="false" vmw:key="slotInfo.pciSlotNumber" vmw:value="16"/> </Item> <Item> <rasd:Address>1</rasd:Address> <rasd:Description>IDE Controller</rasd:Description> <rasd:ElementName>VirtualIDEController 1</rasd:ElementName> <rasd:InstanceID>4</rasd:InstanceID> <rasd:ResourceType>5</rasd:ResourceType> </Item> <Item> <rasd:Address>0</rasd:Address> <rasd:Description>IDE Controller</rasd:Description> <rasd:ElementName>VirtualIDEController 0</rasd:ElementName> <rasd:InstanceID>5</rasd:InstanceID> <rasd:ResourceType>5</rasd:ResourceType> </Item> <Item ovf:required="false"> <rasd:AutomaticAllocation>false</rasd:AutomaticAllocation> <rasd:ElementName>VirtualVideoCard</rasd:ElementName> <rasd:InstanceID>6</rasd:InstanceID> <rasd:ResourceType>24</rasd:ResourceType> <vmw:Config ovf:required="false" vmw:key="enable3DSupport" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="enableMPTSupport" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="use3dRenderer" vmw:value="automatic"/> <vmw:Config ovf:required="false" vmw:key="useAutoDetect" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="videoRamSizeInKB" vmw:value="4096"/> </Item> <Item ovf:required="false"> <rasd:AutomaticAllocation>false</rasd:AutomaticAllocation> <rasd:ElementName>VirtualVMCIDevice</rasd:ElementName> <rasd:InstanceID>7</rasd:InstanceID> <rasd:ResourceSubType>vmware.vmci</rasd:ResourceSubType> <rasd:ResourceType>1</rasd:ResourceType> <vmw:Config ovf:required="false" vmw:key="allowUnrestrictedCommunication" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="slotInfo.pciSlotNumber" vmw:value="32"/> </Item> <Item> <rasd:AddressOnParent>0</rasd:AddressOnParent> <rasd:ElementName>Hard Disk 1</rasd:ElementName> <rasd:HostResource>ovf:/disk/vmdisk1</rasd:HostResource> <rasd:InstanceID>8</rasd:InstanceID> <rasd:Parent>3</rasd:Parent> <rasd:ResourceType>17</rasd:ResourceType> <vmw:Config ovf:required="false" vmw:key="backing.writeThrough" vmw:value="false"/> </Item> <Item ovf:required="false"> <rasd:AddressOnParent>0</rasd:AddressOnParent> <rasd:AutomaticAllocation>false</rasd:AutomaticAllocation> <rasd:ElementName>CD-ROM 1</rasd:ElementName> <rasd:InstanceID>9</rasd:InstanceID> <rasd:Parent>5</rasd:Parent> <rasd:ResourceSubType>vmware.cdrom.remoteatapi</rasd:ResourceSubType> <rasd:ResourceType>15</rasd:ResourceType> <vmw:Config ovf:required="false" vmw:key="connectable.allowGuestControl" vmw:value="true"/> </Item> <Item> <rasd:AddressOnParent>7</rasd:AddressOnParent> <rasd:AutomaticAllocation>true</rasd:AutomaticAllocation> <rasd:Connection>VM Network</rasd:Connection> <rasd:Description>VmxNet3 ethernet adapter on &quot;VM Network&quot;</rasd:Description> <rasd:ElementName>Ethernet 1</rasd:ElementName> <rasd:InstanceID>10</rasd:InstanceID> <rasd:ResourceSubType>VmxNet3</rasd:ResourceSubType> <rasd:ResourceType>10</rasd:ResourceType> <vmw:Config ovf:required="false" vmw:key="connectable.allowGuestControl" vmw:value="true"/> <vmw:Config ovf:required="false" vmw:key="slotInfo.pciSlotNumber" vmw:value="160"/> <vmw:Config ovf:required="false" vmw:key="wakeOnLanEnabled" vmw:value="true"/> </Item> <vmw:Config ovf:required="false" vmw:key="cpuHotAddEnabled" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="cpuHotRemoveEnabled" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="firmware" vmw:value="bios"/> <vmw:Config ovf:required="false" vmw:key="virtualICH7MPresent" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="virtualSMCPresent" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="memoryHotAddEnabled" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="nestedHVEnabled" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="powerOpInfo.powerOffType" vmw:value="soft"/> <vmw:Config ovf:required="false" vmw:key="powerOpInfo.resetType" vmw:value="soft"/> <vmw:Config ovf:required="false" vmw:key="powerOpInfo.standbyAction" vmw:value="checkpoint"/> <vmw:Config ovf:required="false" vmw:key="powerOpInfo.suspendType" vmw:value="hard"/> <vmw:Config ovf:required="false" vmw:key="tools.afterPowerOn" vmw:value="true"/> <vmw:Config ovf:required="false" vmw:key="tools.afterResume" vmw:value="true"/> <vmw:Config ovf:required="false" vmw:key="tools.beforeGuestShutdown" vmw:value="true"/> <vmw:Config ovf:required="false" vmw:key="tools.beforeGuestStandby" vmw:value="true"/> <vmw:Config ovf:required="false" vmw:key="tools.syncTimeWithHost" vmw:value="false"/> <vmw:Config ovf:required="false" vmw:key="tools.toolsUpgradePolicy" vmw:value="manual"/> </VirtualHardwareSection> </VirtualSystem> </Envelope>

That did it, the bz files were missing entirely. Thanks for the help!

Was trying to upgrade to 6.3.2 and during the upgrade it was hanging on inflating syslinux, so I thought I would give the server a reboot to try to resolve the issue, now my server won't boot. It gets to the OS Selection Screen (unRaid OS, unRiad Gui, safemode, memtest, etc) but it never boots. It just keeps saying automatic selection in 5..4...3...2...1 and then repeats and never boots? What can I do to get back up and running?

So if we already had the linuxserver repository image installed we don't have to do anything to switch over? That's great news!

Running into an issue for the past few days where CP won't search for itmes and when I manually search I get the following errors: 11-29 08:40:15 ERROR [ couchpotato.core.event] Error in event "quality.single", that wasn't caught: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/event.py", line 15, in runHandler return handler(*args, **kwargs) File "/app/couchpotato/couchpotato/core/plugins/quality/main.py", line 117, in single quality = db.get('quality', identifier, with_doc = True)['doc'] File "/app/couchpotato/libs/CodernityDB/database_super_thread_safe.py", line 43, in _inner res = f(*args, **kwargs) File "/app/couchpotato/libs/CodernityDB/database.py", line 944, in get raise RecordNotFound("Not found") RecordNotFound: Not found encoding=UTF-8 debug=False args=['--config_file=/config/config.ini', '--data_dir=/config/data'] app_dir=/app/couchpotato data_dir=/config/data desktop=None options=Namespace(config_file='/config/config.ini', console_log=False, daemon=False, data_dir='/config/data', debug=False, pid_file='/config/data/couchpotato.pid', quiet=False) 11-29 08:40:15 ERROR [ couchpotato.core.event] Error in event "movie.searcher.single", that wasn't caught: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/event.py", line 15, in runHandler return handler(*args, **kwargs) File "/app/couchpotato/couchpotato/core/media/movie/searcher.py", line 200, in single log.info('Search for %s in %s%s', (default_title, quality['label'], ' ignoring ETA' if always_search or ignore_eta else '')) TypeError: 'NoneType' object has no attribute '__getitem__' encoding=UTF-8 debug=False args=['--config_file=/config/config.ini', '--data_dir=/config/data'] app_dir=/app/couchpotato data_dir=/config/data desktop=None options=Namespace(config_file='/config/config.ini', console_log=False, daemon=False, data_dir='/config/data', debug=False, pid_file='/config/data/couchpotato.pid', quiet=False) Any thoughts?

Having the same issue with a fresh install on 6.2.1, it looks like the folder your mentioned was created, but the plugin stays on Please wait, retrieving plugin information.

Thank you so much! Things got a little dicey there for a bit but I think I've got everything sorted out now.

Label: none uuid: 2476542d-d476-42da-b09b-b7ee87fe3db7 Total devices 3 FS bytes used 80.35GiB devid 1 size 238.47GiB used 178.06GiB path /dev/sdd1 devid 3 size 232.89GiB used 178.06GiB path /dev/sde1 devid 4 size 238.47GiB used 0.00B path /dev/sdj1

Hello- My cache is running 4x SSD's as you can see below, running 4x SSDs of 250gb or larger size, shouldn't my cache size be 500gb? I think there's something wrong with Cache 4 as that one never gets written to, and I can't pre-clear it when the array is off and it's unassigned, pre-clear says it's busy. Also if I start the array with Cache 4 unassigned my cache is not mountable - how can I get this sorted out?

Just went through each docker installation one at a time and went through the support threads for help when needed. Most of them are pretty self explanatory. it's just tinkering with the settings to get them all talking to each other.

+1 I'm running Plex, Sonarr, Mylar, Couchpotato and Deluge w/ PIA VPN You can setup Deluge with OpenVPN/Vyprvpn so only deluge is behind the VPN or you can point your searchers to the VPN with Privoxy and have them go over that VPN connection as well. This is a much better solution then an entire VM for this setup. Look into Binhex's repo for DelugeVPN/and other Dockers. If you need help with the setup I just went through the whole thing myself. The dockers themselves will move them based on how you set them up. Ex. Couchpotato renames completed movies and moves to my movies directory, Sonarr renames completed tv shows and moves them to my tv shows directory. Mylar does the same with comics.