manorfan

Members
  • Posts

    41
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

manorfan's Achievements

Rookie

Rookie (2/14)

0

Reputation

  1. Just upgraded emby-server on unraid today 3.5.1.0 (latest container) and now the container starts, then stops a couple minutes later....I tried rebooting Unraid. still the same. It was running great till I ran the docker update today. Any help would really be appreciated. Is therer a way to go back to the previous version? Thanks so much!!......From the logs when starting the container: built with gcc 6.3.0 (crosstool-NG crosstool-ng-1.23.0)configuration: --enable-cross-compile --cross-prefix=x86_64-pc-linux-gnu- --cc=x86_64-pc-linux-gnu-gcc --cxx=x86_64-pc-linux-gnu-g++ --arch=x86_64 --prefix=/home/embybuilder/Buildbot-master/x64/ffmpeg-x64/staging --pkg-config=pkg-config --disable-doc --disable-ffplay --disable-xlib --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libwebp --enable-libx264 --enable-libzvbi --enable-version3 --extra-libs='-ldl -lexpat -lfreetype -lfribidi -lfontconfig -liconv -lpng -luuid -lz -lvorbis -logg -lnettle -lhogweed -lgmp -laddns-samba4 -lasn1util-samba4 -lauthkrb5-samba4 -lCHARSET3-samba4 -lcliauth-samba4 -lcli-cldap-samba4 -lcli-ldap-common-samba4 -lcli-nbt-samba4 -lcli-smb-common-samba4 -lcom_err -lcommon-auth-samba4 -ldbwrap-samba4 -ldcerpc-binding -ldcerpc-samba-samba4 -lflag-mapping-samba4 -lgenrand-samba4 -lgensec-samba4 -lgse-samba4 -lgssapi_krb5 -llibcli-lsa3-samba4 -llibsmb-samba4 -linterfaces-samba4 -liov-buf-samba4 -lk5crypto -lkrb5 -lkrb5samba-samba4 -lkrb5support -lldb -lldbsamba-samba4 -lmessages-dgm-samba4 -lmessages-util-samba4 -lmsghdr-samba4 -lmsrpc3-samba4 -lndr -lndr-krb5pac -lndr-nbt -lndr-samba-samba4 -lndr-standard -lreplace-samba4 -lsamba-cluster-support-samba4 -lsamba-credentials -lsamba-debug-samba4 -lsamba-errors -lsamba-hostconfig -lsamba-modules-samba4 -lsamba-security-samba4 -lsamba-sockets-samba4 -lsamba-util -lsamba3-util-samba4 -lsamdb -lsamdb-common-samba4 -lsecrets3-samba4 -lserver-id-db-samba4 -lserver-role-samba4 -lsmbconf -lsmbd-shim-samba4 -lsmb-transport-samba4 -lsocket-blocking-samba4 -lsys-rw-samba4 -ltalloc -ltalloc-report-samba4 -ltdb -ltdb-wrap-samba4 -ltevent -ltevent-util -ltime-basic-samba4 -lutil-cmdline-samba4 -lutil-reg-samba4 -lutil-setid-samba4 -lutil-tdb-samba4 -lwbclient -lwinbind-client-samba4 -ldrm' --target-os=linux --enable-shared --disable-static --enable-libsmbclient --enable-cuda --enable-cuvid --enable-nvenc --enable-vaapilibavutil 56. 14.100 / 56. 14.100libavcodec 58. 18.100 / 58. 18.100libavformat 58. 12.100 / 58. 12.100libavdevice 58. 3.100 / 58. 3.100libavfilter 7. 16.100 / 7. 16.100libswscale 5. 1.100 / 5. 1.100libswresample 3. 1.100 / 3. 1.100libpostproc 55. 1.100 / 55. 1.100[mov,mp4,m4a,3gp,3g2,mj2 @ 0x644a80] moov atom not foundfile:/mnt/user/Streaming/Playlater/Holiday Scenics/Holiday Scenics - Magical Christmas.mp4: Invalid data found when processing inputffprobe version 4.0.1 Copyright (c) 2007-2018 the FFmpeg developersbuilt with gcc 6.3.0 (crosstool-NG crosstool-ng-1.23.0)configuration: --enable-cross-compile --cross-prefix=x86_64-pc-linux-gnu- --cc=x86_64-pc-linux-gnu-gcc --cxx=x86_64-pc-linux-gnu-g++ --arch=x86_64 --prefix=/home/embybuilder/Buildbot-master/x64/ffmpeg-x64/staging --pkg-config=pkg-config --disable-doc --disable-ffplay --disable-xlib --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libwebp --enable-libx264 --enable-libzvbi --enable-version3 --extra-libs='-ldl -lexpat -lfreetype -lfribidi -lfontconfig -liconv -lpng -luuid -lz -lvorbis -logg -lnettle -lhogweed -lgmp -laddns-samba4 -lasn1util-samba4 -lauthkrb5-samba4 -lCHARSET3-samba4 -lcliauth-samba4 -lcli-cldap-samba4 -lcli-ldap-common-samba4 -lcli-nbt-samba4 -lcli-smb-common-samba4 -lcom_err -lcommon-auth-samba4 -ldbwrap-samba4 -ldcerpc-binding -ldcerpc-samba-samba4 -lflag-mapping-samba4 -lgenrand-samba4 -lgensec-samba4 -lgse-samba4 -lgssapi_krb5 -llibcli-lsa3-samba4 -llibsmb-samba4 -linterfaces-samba4 -liov-buf-samba4 -lk5crypto -lkrb5 -lkrb5samba-samba4 -lkrb5support -lldb -lldbsamba-samba4 -lmessages-dgm-samba4 -lmessages-util-samba4 -lmsghdr-samba4 -lmsrpc3-samba4 -lndr -lndr-krb5pac -lndr-nbt -lndr-samba-samba4 -lndr-standard -lreplace-samba4 -lsamba-cluster-support-samba4 -lsamba-credentials -lsamba-debug-samba4 -lsamba-errors -lsamba-hostconfig -lsamba-modules-samba4 -lsamba-security-samba4 -lsamba-sockets-samba4 -lsamba-util -lsamba3-util-samba4 -lsamdb -lsamdb-common-samba4 -lsecrets3-samba4 -lserver-id-db-samba4 -lserver-role-samba4 -lsmbconf -lsmbd-shim-samba4 -lsmb-transport-samba4 -lsocket-blocking-samba4 -lsys-rw-samba4 -ltalloc -ltalloc-report-samba4 -ltdb -ltdb-wrap-samba4 -ltevent -ltevent-util -ltime-basic-samba4 -lutil-cmdline-samba4 -lutil-reg-samba4 -lutil-setid-samba4 -lutil-tdb-samba4 -lwbclient -lwinbind-client-samba4 -ldrm' --target-os=linux --enable-shared --disable-static --enable-libsmbclient --enable-cuda --enable-cuvid --enable-nvenc --enable-vaapilibavutil 56. 14.100 / 56. 14.100libavcodec 58. 18.100 / 58. 18.100libavformat 58. 12.100 / 58. 12.100libavdevice 58. 3.100 / 58. 3.100libavfilter 7. 16.100 / 7. 16.100libswscale 5. 1.100 / 5. 1.100libswresample 3. 1.100 / 3. 1.100libpostproc 55. 1.100 / 55. 1.100[mov,mp4,m4a,3gp,3g2,mj2 @ 0x644a80] moov atom not foundfile:/mnt/user/Streaming/Playlater/Shaun the Sheep/Season 1/Shaun the Sheep - s01e05 - E36 THE VISITOR, E36 ABRACADABRA, E40 SHAUN ENCOUNTERS.mp4: Invalid data found when processing inputffprobe version 4.0.1 Copyright (c) 2007-2018 the FFmpeg developersbuilt with gcc 6.3.0 (crosstool-NG crosstool-ng-1.23.0)configuration: --enable-cross-compile --cross-prefix=x86_64-pc-linux-gnu- --cc=x86_64-pc-linux-gnu-gcc --cxx=x86_64-pc-linux-gnu-g++ --arch=x86_64 --prefix=/home/embybuilder/Buildbot-master/x64/ffmpeg-x64/staging --pkg-config=pkg-config --disable-doc --disable-ffplay --disable-xlib --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libwebp --enable-libx264 --enable-libzvbi --enable-version3 --extra-libs='-ldl -lexpat -lfreetype -lfribidi -lfontconfig -liconv -lpng -luuid -lz -lvorbis -logg -lnettle -lhogweed -lgmp -laddns-samba4 -lasn1util-samba4 -lauthkrb5-samba4 -lCHARSET3-samba4 -lcliauth-samba4 -lcli-cldap-samba4 -lcli-ldap-common-samba4 -lcli-nbt-samba4 -lcli-smb-common-samba4 -lcom_err -lcommon-auth-samba4 -ldbwrap-samba4 -ldcerpc-binding -ldcerpc-samba-samba4 -lflag-mapping-samba4 -lgenrand-samba4 -lgensec-samba4 -lgse-samba4 -lgssapi_krb5 -llibcli-lsa3-samba4 -llibsmb-samba4 -linterfaces-samba4 -liov-buf-samba4 -lk5crypto -lkrb5 -lkrb5samba-samba4 -lkrb5support -lldb -lldbsamba-samba4 -lmessages-dgm-samba4 -lmessages-util-samba4 -lmsghdr-samba4 -lmsrpc3-samba4 -lndr -lndr-krb5pac -lndr-nbt -lndr-samba-samba4 -lndr-standard -lreplace-samba4 -lsamba-cluster-support-samba4 -lsamba-credentials -lsamba-debug-samba4 -lsamba-errors -lsamba-hostconfig -lsamba-modules-samba4 -lsamba-security-samba4 -lsamba-sockets-samba4 -lsamba-util -lsamba3-util-samba4 -lsamdb -lsamdb-common-samba4 -lsecrets3-samba4 -lserver-id-db-samba4 -lserver-role-samba4 -lsmbconf -lsmbd-shim-samba4 -lsmb-transport-samba4 -lsocket-blocking-samba4 -lsys-rw-samba4 -ltalloc -ltalloc-report-samba4 -ltdb -ltdb-wrap-samba4 -ltevent -ltevent-util -ltime-basic-samba4 -lutil-cmdline-samba4 -lutil-reg-samba4 -lutil-setid-samba4 -lutil-tdb-samba4 -lwbclient -lwinbind-client-samba4 -ldrm' --target-os=linux --enable-shared --disable-static --enable-libsmbclient --enable-cuda --enable-cuvid --enable-nvenc --enable-vaapilibavutil 56. 14.100 / 56. 14.100libavcodec 58. 18.100 / 58. 18.100libavformat 58. 12.100 / 58. 12.100libavdevice 58. 3.100 / 58. 3.100libavfilter 7. 16.100 / 7. 16.100libswscale 5. 1.100 / 5. 1.100libswresample 3. 1.100 / 3. 1.100libpostproc 55. 1.100 / 55. 1.100[mov,mp4,m4a,3gp,3g2,mj2 @ 0x644a80] moov atom not foundfile:/mnt/user/Streaming/Playlater/Holiday Scenics/Holiday Scenics - Magical Christmas.mp4: Invalid data found when processing inputUnhandledExceptionSystem.IO.IOException: Unable to read data from the transport connection: Connection reset by peer. ---> System.Net.Sockets.SocketException: Connection reset by peer--- End of inner exception stack trace ---at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.ThrowException(SocketError error)at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.GetResult(Int16 token)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Net.Security.SslState.ThrowIfExceptional()at System.Net.Security.SslState.CheckThrow(Boolean authSuccessCheck, Boolean shutdownCheck)at System.Net.Security.SslState.CheckOldKeyDecryptedData(Memory`1 buffer)at System.Net.Security.SslState.HandleQueuedCallback(Object& queuedStateRequest)at System.Net.Security.SslState.FinishHandshakeRead(Int32 newState)at System.Net.Security.SslState.FinishHandshake(Exception e, AsyncProtocolRequest asyncRequest)at System.Net.Security.SslState.RehandshakeCompleteCallback(IAsyncResult result)at System.Net.LazyAsyncResult.Complete(IntPtr userToken)at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)at System.Net.AsyncProtocolRequest.CompleteUserWithError(Exception e)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)--- End of stack trace from previous location where exception was thrown ---at System.Threading.ThreadPoolWorkQueue.Dispatch()System.IO.IOExceptionat System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.ThrowException(SocketError error)at System.Net.Sockets.Socket.AwaitableSocketAsyncEventArgs.GetResult(Int16 token)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Net.Security.SslState.ThrowIfExceptional()at System.Net.Security.SslState.CheckThrow(Boolean authSuccessCheck, Boolean shutdownCheck)at System.Net.Security.SslState.CheckOldKeyDecryptedData(Memory`1 buffer)at System.Net.Security.SslState.HandleQueuedCallback(Object& queuedStateRequest)at System.Net.Security.SslState.FinishHandshakeRead(Int32 newState)at System.Net.Security.SslState.FinishHandshake(Exception e, AsyncProtocolRequest asyncRequest)at System.Net.Security.SslState.RehandshakeCompleteCallback(IAsyncResult result)at System.Net.LazyAsyncResult.Complete(IntPtr userToken)at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)at System.Net.AsyncProtocolRequest.CompleteUserWithError(Exception e)at System.Net.FixedSizeReader.ReadPacketAsync(Stream transport, AsyncProtocolRequest request)at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)--- End of stack trace from previous location where exception was thrown ---at System.Threading.ThreadPoolWorkQueue.Dispatch()InnerException: System.Net.Sockets.SocketExceptionSystem.Net.Sockets.SocketException (104): Connection reset by peer[cont-finish.d] executing container finish scripts...[cont-finish.d] done.[s6-finish] syncing disks.[s6-finish] sending all processes the TERM signal.[s6-finish] sending all processes the KILL signal and exiting.
  2. Sorry. Newbie question. I've added the parameter and plex "applied" successfully. Where using MC should I find this directory (I'd like to verify that's where the transcoding is going)? I show a /tmp under the root directory and a /var/tmp as well.
  3. Where do I go to get into the docke r image? Or is it easier to remove ple x and re install? Would re instAlling delete the /tmp. Directory?
  4. I suspect this may be what I have done. I mapped /transcode to /tmp.(host) but then entered /tmp. in the docker settings. I've remoted in and set plex to /transcode. How (when I get home) do I cleanup the docker image?
  5. #@$&! Autocorrect. That should read O was under the impression that /tmp. Was ram?
  6. I'm still at work. Cannot check the logs yet. But a few weeks ago I changed my transcoding path in ple x to /tmp. Could that be the issue? I was under the impression /html was ram. Maybe I did missed some other step?
  7. That is likely it. I forgot about creating a docker image when first installed. I'll check/post logs when I get home tonight. Question... After a full reboot that didn't help, I deleted a couple dockers I don't use anymore which didn't help either. At what point should the deleted file space actually become available within the image? Immediately? After restart? Or after some kind of scheduled cleanup? Never? Thanks!
  8. Hi. Still relative newbie here. Suddenly I cannot update any of my dockers. Updating plex gave me the following error: Error: write /var/lib/docker/tmp/GetImageBlob901291657: no space left on device All dockers give similar errors about running out of space. My drives look like they all have plenty of space left. Tried rebooting system. Running 6.3.5. Any ideas? Thanks, Bobby
  9. Hi Folks, I have an old HP xw8600 I'm using for unraid. The MB already has an LSI controller on board that is used for the data/parity drives. I just purchased an LSI 9211-8i strictly as the interface for my flash drives (4 x 128gb). The xw8600 MB has the ability to disable the ROM downloads from the onboard SAS/SATA as well as the PCIe slots individually. I've disabled the ROM for the on board LSI controller and this new card (couldn't help but to play with the new toy) and all seems to be working fine. It sees and is using all the drives without downloading the ROMs during boot. Does anybody know if it is safe to run unraid in this manor? Just bypassing the ROMs instead of changing the firmware(s) to IT mode? Thanks!
  10. As I understand it, if a parity drive goes bad, it must be replaced with a drive of equal or greater size. What about the data drives? If I have a 4TB drive that goes bad, but it only had 1TB of data on it, can I replace it with a 2TB drive? Or must it also be 4TB or equal to the parity drive size? And/or does this depend on how you rebuild it (unraid rebuilds it or I manually format and copy the files over)? Thanks!
  11. Thanks. So what you're saying is if I don't pre clear the drive again before using it in the array, Unraid will do it anyway before it puts the drive online?
  12. I just pre cleared a 4TB drive, then because of a flaky sata card that dorked the drive I had to use some windows tools to get the drive back. Unfortunately the pre clear code went away because of these tools. I shutter to have to run that again (20+ hours). is there a way to NOT pre clear the disk when installing it since it has passed pre clear already? It's just missing the code on the disk. Thanks!!