loady

Members
  • Posts

    694
  • Joined

  • Last visited

About loady

  • Birthday 04/05/1971

Converted

Recent Profile Visitors

2089 profile views

loady's Achievements

Enthusiast

Enthusiast (6/14)

2

Reputation

  1. So, it was up for over six days in safe mode and crashed again last night.. if this is hardware related where would the logical place be to start ? I have a 10TB drive i want to use to replace my parity drive, im guessing its not wise to do so whilst it is exhibiting this behaviour ? syslog (1) warptower-diagnostics-20230425-1348.zip
  2. Thats going to be a headache if it is hardware related... where do you even start looking, i suppose i could remove the memory and just start with one stick and see if it persists, adding a stick at a time. Would be good if it was the mobo because i am looking at upgrading that to one with two .m2 slots
  3. Ah, sorry, i forgot i had enabled this, is this syslog of any use ? it should show the times i have had to hard reboot the server syslog
  4. warptower-diagnostics-20230318-1326.zip warptower-diagnostics-20230321-1744.zip warptower-diagnostics-20230403-1235.zip
  5. The server has been in use so i have not been able to do what you said yet, however, whilst in safe mode gui mode (no plugins) it has still been crashing, it just takes a longer time to do it. syslog warptower-diagnostics-20230114-1305.zip
  6. Right, its been up for nearly 20 hours now, parity check has completed and no errors. All dockers are functional but no plugins installed, i chose safemode GUI no plugins. syslog
  7. im still trying to find fan regulators for the 3 fans that face the drives, its like sitting next to a jet engine if they are just plugged in without any speed control
  8. so i started it in gui mode no plugins, should i still start the array though or just leave it like that ?
  9. the only thing i can think that is different..i set up next cloud, but recently i created a link for someone to upload files to me, about 40gb.... would this cause the server to crash ?
  10. Well its crashed again, less than 30 mins uptime..i took it out before restarting this time and its populated now... syslog
  11. I followed these instructions.. Go to Settings->Network Services->Syslog Server You can click on the 'Help' icon on the Toolbar and get more information for all of the options. Mirror to Flash: This is the simplest to set up. You select 'Yes' from the dropdown box and click on the 'Apply' button and the syslog will be mirrored to the logs folder/directory of the flash drive and is appended to on a reboot. There is one principal disadvantage to this method. If the condition, that you are trying to troubleshoot, takes days to weeks to occur, it can do a lot of writes to the flash drive. Some folks are hesitant to use the flash drive in this manner as it may shorten the life of the flash drive. The advantage of this approach is that it captures everything from the start of the boot process which can be important if trying to diagnose boot problems. Have i missed something ?...i hard shut down the server as it had crashed and then removed the flash drive to get the file off.
  12. I turned on syslog server and have attached the log from the flash drive, there was also a diags on there to so have uploaded it also, there server crashed about 2 hours after turning on syslog server. syslog warptower-diagnostics-20221229-1210.zip
  13. Is that logging in with SSH using putty ? not sure how to enable syslog server
  14. How do i get diags if i cant access the GUI ? i am only aware of the issue at the point i go to try use the server
  15. I already did that as recommended a few posts back, it passed. New diags attached if any use warptower-diagnostics-20221229-1210.zip