blueink

Sorry! Removed my question as this isn’t the right place and I don’t want to clutter up the thread. Thank you for this awesome plugin!

This is a long shot; however, I wanted to see if anyone had memory they were looking to sell. Preferably I would like http://www.kingston.com/us/memory/search/?partid=kvr1333d3e9sk2/16g but if it fits the X9SCM-iiF motherboard I could also consider something else. Thanks!

Hi all, I have been using unRaid for a while now on my old hardware, but recently I finally put together my new computer and put the harddrives in there and everything was working extremely well. So I decided I should do a parity check. During the parity check, the system became completely unresponsive (webui, telnet, and at the computer itself). After restarting the computer the parity check started again. After about 10%, it became unresponsive again. I'm currently at about 30% and it seems like everything might be ok, but I don't want to go on thinking everything is ok when it's not. I currently have a telnet session open with the following command running "tail -f /var/log/syslog". I would appreciate if someone could look over my current log and see if there is anything out of the ordinary. I appreciate any help anyone can provide. Thank you! I'm currently on rc-15a. H/W: X9SCM-iiF Xeon E3-1240 v2 Seasonic X650 2 IBM M1015 flashed to IT Edit: So it finished without any errors, but I still feel a bit uneasy about the 2 lockups. syslog-2013-06-24.txt

Thanks for the how-to. Here's my attempt:

Hi everyone, I've been discussing some computer building with a buddy of mine. He's not very much into unraid building, but he's very knowledgeable on building computers. I've been discussing hardware with him. He keeps encouraging me to wait for the new haswell processors. He's saying that the cost of the current ivy bridge processors won't decrease and it'll be approximately the same to buy the haswells. I did see that we can expect the haswell xeon e3's in June and supermicro is working on motherboards for them. I was planning on building an ESXI build and I was just going to by a Xeon E3 Ivy Bridge and a supermicro motherboard. What do you guys think? Is it worth the wait? Will the cost really be comparable to what the current hardware costs?

http://www.ebay.com/itm/IBM-ServeRAID-M1015-RAID-Controller-FRU-46M0861-LSI-/321112781067?pt=LH_DefaultDomain_0&hash=item4ac3d0310b Originally was 55, I got one, but now it's 65.

There's one on ebay for 55 + 9.99 shipping! http://www.ebay.com/itm/IBM-ServeRAID-M1015-RAID-Controller-FRU-46M0861-LSI-/321112781067?pt=LH_DefaultDomain_0&hash=item4ac3d0310b

Very Nice! I was curious if you have tried transcoding more than one 1080p mkv at a time with plex? I'm looking into what processor to go with, but I'm not sure if the i3 will be able to handle it. Thanks!

Hi, I just precleared my first hard drive and I think everything looks good, but can I get a confirmation? Thank you! ========================================================================1.13 == invoked as: ./preclear_disk.sh -A /dev/sdb == ST4000DX000-1CL160 Z1Z03FXA == Disk /dev/sdb has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 10:09:50 (109 MB/s) == Last Cycle's Zeroing time : 9:18:16 (119 MB/s) == Last Cycle's Post Read Time : 23:43:48 (46 MB/s) == Last Cycle's Total Time : 43:12:54 == == Total Elapsed Time 43:12:54 == == Disk Start Temperature: 30C == == Current Disk Temperature: 30C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdb /tmp/smart_finish_sdb ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Raw_Read_Error_Rate = 115 117 6 ok 94589052 Seek_Error_Rate = 72 66 30 ok 17337159 Spin_Retry_Count = 100 100 97 near_thresh 0 End-to-End_Error = 100 100 99 near_thresh 0 Airflow_Temperature_Cel = 70 70 45 near_thresh 30 Hardware_ECC_Recovered = 34 33 0 ok 94589052 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================ ============================================================================ == == S.M.A.R.T Initial Report for /dev/sdb == Disk: /dev/sdb smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST4000DX000-1CL160 Serial Number: Z1Z03FXA Firmware Version: CC44 User Capacity: 4,000,787,030,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Tue Feb 19 10:02:41 2013 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00)^IOffline data collection activity ^I^I^I^I^Iwas never started. ^I^I^I^I^IAuto Offline Data Collection: Disabled. Self-test execution status: ( 0)^IThe previous self-test routine completed ^I^I^I^I^Iwithout error or no self-test has ever ^I^I^I^I^Ibeen run. Total time to complete Offline data collection: ^I^I ( 97) seconds. Offline data collection capabilities: ^I^I^I (0x73) SMART execute Offline immediate. ^I^I^I^I^IAuto Offline data collection on/off support. ^I^I^I^I^ISuspend Offline collection upon new ^I^I^I^I^Icommand. ^I^I^I^I^INo Offline surface scan supported. ^I^I^I^I^ISelf-test supported. ^I^I^I^I^IConveyance Self-test supported. ^I^I^I^I^ISelective Self-test supported. SMART capabilities: (0x0003)^ISaves SMART data before entering ^I^I^I^I^Ipower-saving mode. ^I^I^I^I^ISupports SMART auto save timer. Error logging capability: (0x01)^IError logging supported. ^I^I^I^I^IGeneral Purpose Logging supported. Short self-test routine recommended polling time: ^I ( 1) minutes. Extended self-test routine recommended polling time: ^I ( 255) minutes. Conveyance self-test routine recommended polling time: ^I ( 2) minutes. SCT capabilities: ^I (0x50bf)^ISCT Status supported. ^I^I^I^I^ISCT Error Recovery Control supported. ^I^I^I^I^ISCT Feature Control supported. ^I^I^I^I^ISCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 100 006 Pre-fail Always - 158814065 3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 16 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always - 4185556 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 13 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 16 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 061 045 Old_age Always - 30 (Min/Max 29/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 11 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 194 Temperature_Celsius 0x0022 030 040 000 Old_age Always - 30 (0 21 0 0) 195 Hardware_ECC_Recovered 0x001a 033 015 000 Old_age Always - 158814065 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 109238198206477 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2007430296 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 8206098229 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================ ============================================================================ == == S.M.A.R.T Final Report for /dev/sdb == Disk: /dev/sdb smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: ST4000DX000-1CL160 Serial Number: Z1Z03FXA Firmware Version: CC44 User Capacity: 4,000,787,030,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Thu Feb 21 05:15:35 2013 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00)^IOffline data collection activity ^I^I^I^I^Iwas never started. ^I^I^I^I^IAuto Offline Data Collection: Disabled. Self-test execution status: ( 0)^IThe previous self-test routine completed ^I^I^I^I^Iwithout error or no self-test has ever ^I^I^I^I^Ibeen run. Total time to complete Offline data collection: ^I^I ( 97) seconds. Offline data collection capabilities: ^I^I^I (0x73) SMART execute Offline immediate. ^I^I^I^I^IAuto Offline data collection on/off support. ^I^I^I^I^ISuspend Offline collection upon new ^I^I^I^I^Icommand. ^I^I^I^I^INo Offline surface scan supported. ^I^I^I^I^ISelf-test supported. ^I^I^I^I^IConveyance Self-test supported. ^I^I^I^I^ISelective Self-test supported. SMART capabilities: (0x0003)^ISaves SMART data before entering ^I^I^I^I^Ipower-saving mode. ^I^I^I^I^ISupports SMART auto save timer. Error logging capability: (0x01)^IError logging supported. ^I^I^I^I^IGeneral Purpose Logging supported. Short self-test routine recommended polling time: ^I ( 1) minutes. Extended self-test routine recommended polling time: ^I ( 255) minutes. Conveyance self-test routine recommended polling time: ^I ( 2) minutes. SCT capabilities: ^I (0x50bf)^ISCT Status supported. ^I^I^I^I^ISCT Error Recovery Control supported. ^I^I^I^I^ISCT Feature Control supported. ^I^I^I^I^ISCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 115 100 006 Pre-fail Always - 94589052 3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 16 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 17337159 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 56 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 16 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 061 045 Old_age Always - 30 (Min/Max 29/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 11 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 194 Temperature_Celsius 0x0022 030 040 000 Old_age Always - 30 (0 21 0 0) 195 Hardware_ECC_Recovered 0x001a 034 015 000 Old_age Always - 94589052 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 126014340464696 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 9821467512 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 32052284577 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. == ============================================================================