sacretagent

Hi, as my old systemboard went haywire and don't let me boot any more from usb when all 16 drives are attached did i jump to this new setup which is even more frustrating no matter what i try he doesn't want to accept or my adaptec 1220SA or my sil 3114 sata cards.... he only sees my one asm162 card ... i can move that last card to any slot and he will see the disks attached .... the adaptec or the sil cards he doesn't see the disks in any of the slots anybody has some advice? thinking of buying a lsi 9211-8i in IT mode but afraid he won't see him too.... might be best to just return the setup? any advice on a ryzen board that sees the sil or the adaptec card? Greetings Sacret

ok this server has been running for more then a year with the current configuration but due to some electricity problems (aka a snake that got roasted on a transformator in the village) did this server lose his bios settings and now for the love of god i can't get him to boot from the USB stick..... i can if i remove 2 sata controller but then of course i don't have all my disks lol.... i tried everything i can think off but been busy now for like 15 hours and i can't get him to boot from the usb with all 16 disks installed .... bios shows only 12 disks.... and the usb doesn't show in these 12 disks.... only if i disable 2 onboard controllers or remove 2 sata controller physically it will show me the usb in the list but when i enable the controllers again or insert the 2 removed ones then next boot the usb is missing again.... it was working and i remember i had similar problem when i set this up but i forgot what the solution was a year ago so i was hoping if somebody knows how to solve this..... here are the bios settings screens https://drive.google.com/file/d/1-5MC436EH5eKFiVKVLlNXHPvJCgx3vqi/view?usp=sharing https://drive.google.com/file/d/1-FhypBc7UpSqMNXlXiVDBLY9p-hIaxFd/view?usp=sharing https://drive.google.com/file/d/1-S6q9zmdyhq-JRslEGJOWE7Z9TVZlQej/view?usp=sharing https://drive.google.com/file/d/1YGUg_XfvtjVwFRS7yHFBcH1ZsS0hj4ve/view?usp=sharing https://drive.google.com/file/d/1-D8I6_AK6M21WvMSBne3PpZAscMv2YCI/view?usp=sharing https://drive.google.com/file/d/1-f-b5SnVEzxSthGvMSn4RkxdFJD1_Qx3/view?usp=sharing https://drive.google.com/file/d/1-_iEyaBrbWTfdbDKRwUsbyyQHUYsFBJq/view?usp=sharing https://drive.google.com/file/d/1-Jk6TQWQn1I-tPJaySZ-oRO6FmygAl72/view?usp=sharing

mm restarted docker service and now it works ,.... weird

last update from today won't start up .. get an error 403 or so

newest rutorrent upgrade has changed parameters... rtorrent will not start... .. can you please advise on the new parameters... old ones are peer_exchange and use_udp_trackers.... had to # them before rtorrent would start....

squid , something wrong with the newest version... got that there is a newer version but it doesn't have the same "format" as the other plugins and it fails to upgrade ... where other plugins upgrade fine it says newest version 2017.04.29b i am on 2017.04.09 the title in the plugins page is this error i get on both servers plugin: updating: community.applications.plg Cleaning Up Old Versions plugin: downloading: https://raw.github.com/Squidly271/community.applications/master/archive/community.applications-2017.04.29b.txz ... failed (File I/O error) plugin: wget: https://raw.github.com/Squidly271/community.applications/master/archive/community.applications-2017.04.29b.txz download failure (File I/O error) like i said other plugins upgrade fine only this one fails on both servers

well installing the powerdown plugin solves the issue again array shut down nicely last night i don't mind troubleshooting but 2 times i tried powerdown without plugin and really "NOTHING" happens no umounts not nothing it is like typing clear in terminal but at least clear cleans up your terminal powerdown did nothing lol

server didn't power down last night ;( from cli /usr/local/sbin/powerdown or just powerdown powerdown or /usr/local/sbin/powerdown does NOTHING .... going to install the package again after i find this restriction and delete the restriction

server didn't power down last night ;( from cli

hi guys , how do i shutdown my server now if no powerdown is installed ? running 6.2 before i had this in my go file what would i need to call now for a clean shutdown ?

thx works as expected now.... chosen options are on the screen now

HI this is the content of the json file as you can see that is correct but see attached screenshot .. the values are not correct

yep... change the setting and click apply... same happens with the inotify settings... change it to 728000 hit apply....move to main window... come back ... nothing there any more

small bug? the timeout settings seem not to stick when you change them ... i have several time set the timeout on my movie server to 30 minutes ... but every time i open the window to the global settings or checksum tools it always shows 1 minute.... so not sure if the changes stick for that option....

i had no issues but it is best to first upgrade crashplan and then crashplan desktop both have been updated to install 4.4.1 and desktop requires the information from crashplan to be able to connect.. see extra parameters line from the desktop container "--volumes-from CrashPlan" i had to delete an orphaned image though after this as due to this parameter the updated could not delete the old image....