mrcsx

Members
  • Posts

    68
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

mrcsx's Achievements

Rookie

Rookie (2/14)

1

Reputation

  1. That appears to have been the problem. Now I was able to remove the drive and it's balancing as I type this! Thank you for the help!
  2. Here are the diagnostics kirk-diagnostics-20240118-1156.zip
  3. I'm trying to replace my cache pool made up of a 1.2TB and 1.92TB SSD drives with a single 3.84TB SSD. I have the pool as Raid1, however when I stop the array and try to remove a drive to make it a single drive cache pool, it says Wrong Pool State, too many missing disks. I've gone through forum posts, and figure I must be missing something simple. Can someone point me in the right direction? Essentially I want to Remove the 1.2TB drive, leaving the single 1.92TB drive, then add the 3.84TB drive making it Raid 1, then eventually remove the 1.92TB drive with another 3.84TB drive.
  4. I already checked the USB on a windows pc and it came back with no issues. I’m thinking I’m going to recreate the USB stick and just copy over the super.dat from my backup and see if that clears things up.
  5. I upgraded to 6.5.1 tonight, and now none of my disks are showing on the Webgui other then one under the unassigned devices section (which is not part of my array). The array starts and I can access my shares, however all the devices are blank (no drop downs or anything) My diagnostics and an image are attached. diagnostics.zip
  6. I'm moving and won't have space for a rack mount server, so my Norco 4220 must go! Figured I'd post it here before putting it on eBay. It is in great condition, still has the plastic protection on the top and sides of the chassis. Includes both the stock and 120mm fan wall, as well as rack rails. PM me for a shipping quote, I'm located in Canada. 250.00
  7. I've had a couple Seagate 5TBs that I pulled out of enclosures and used in my array for the last few months as well with no issues. One is my parity and one is a data drive. Like i said, no issues so far.
  8. Upgraded my server, and I have the following for sale. Supermicro X7DWE Motherboard Intel Xeon 5120 1.83Ghz Cpu 4GB (2 x 2gb) DDR2 Ram (Supermicro Approved Ram) Supermicro SIMLP-B+ IPMI Card Supermicro Passive CPU Heatsink I'm looking to get 100 (+ Shipping) for everything. I'm in Canada. PM me for a shipping quote if you're interested.
  9. I'm selling an extra Supermicro AOC-SASLP-MV8 SATA card that I've got laying around. This was used in my second unraid system for about a year with no problems. I consolidated down to one server, so this one is for sale. Includes 2 Breakout cables and the card with the full height bracket. Asking 80.00 plus shipping I'm in Canada, so shipping would be 10.00 in Canada and 20.00 to the US.
  10. I'm having the same trouble, however the issue seems to be with the root of my cache drive (/mnt/cache) rather then any of the top level directories. root@Kirk:/mnt/cache# getfattr -d /mnt/cache/ /mnt/cache/: user.org.netatalk.supports-eas.KFNF3F: Input/output error All the folders on the cache drive are clean, as well as all the folders on my data drives. Any suggestions?
  11. Still have these kicking around. Taking offers!!