spidi

why MythTV try this one. http://lime-technology.com/forum/index.php?topic=20782.0

I don't recommend hidden folders for plex, instead create an "cache only" user share.

new plex media server is out: http://www.plexapp.com/linux/linux-pms-download.php

the patch for Plex is already committed. then there should be no problem from this side.... it will be released as soon as possible.

stupid question, but whats your test data? do you copy lots of small files or one big with 50 GB. because unRAID doens't work like RAID5, there you have 80GB but with unRAID you have 2 x 40 GB of protected data

May 7 13:13:36 nas kernel: mdcmd (594): spindown 2 May 7 13:13:50 nas kernel: mdcmd (595): spindown 5 May 7 13:13:51 nas kernel: mdcmd (596): spindown 4 May 7 13:13:53 nas kernel: mdcmd (597): spindown 1 May 7 13:27:25 nas kernel: mdcmd (598): spindown 0 May 7 13:28:08 nas kernel: mdcmd (599): spindown 0 May 7 13:28:08 nas kernel: mdcmd (600): spindown 2 May 7 13:28:26 nas kernel: mdcmd (601): spindown 1 May 7 13:28:27 nas kernel: mdcmd (602): spindown 3 May 7 13:28:28 nas kernel: mdcmd (603): spindown 4 May 7 13:28:36 nas kernel: mdcmd (604): spindown 2 May 7 13:29:27 nas kernel: mdcmd (605): spindown 0 May 7 13:29:27 nas kernel: mdcmd (606): spindown 3 May 7 13:30:33 nas kernel: mdcmd (607): spindown 0 May 7 13:30:33 nas kernel: mdcmd (608): spindown 3 May 7 13:30:50 nas kernel: mdcmd (609): spindown 0 May 7 13:30:50 nas kernel: mdcmd (610): spindown 3 May 7 13:31:04 nas kernel: mdcmd (611): spindown 3 May 7 13:31:49 nas kernel: mdcmd (612): spindown 0 May 7 13:31:50 nas kernel: mdcmd (613): spindown 3 May 7 14:13:52 nas kernel: mdcmd (614): spindown 4 May 7 14:13:53 nas kernel: mdcmd (615): spindown 5 May 7 14:13:56 nas kernel: mdcmd (616): spindown 1 May 7 14:28:04 nas kernel: mdcmd (617): spindown 5 May 7 14:28:20 nas kernel: mdcmd (618): spindown 3 May 7 14:31:04 nas kernel: mdcmd (619): spindown 0 May 7 14:31:05 nas kernel: mdcmd (620): spindown 3 May 7 14:42:08 nas kernel: mdcmd (621): spindown 3 May 7 15:13:33 nas kernel: mdcmd (622): spindown 2 May 7 15:13:43 nas kernel: mdcmd (623): spindown 4 May 7 15:13:44 nas kernel: mdcmd (624): spindown 5 May 7 15:13:47 nas kernel: mdcmd (625): spindown 1 May 7 15:27:10 nas kernel: mdcmd (626): spindown 0 May 7 15:28:15 nas kernel: mdcmd (627): spindown 3 My spindown time is set to 30 min, so even if one process is wacking up some drives why do they spindown again15 min after the last one???

May be possible to change the port number. Security through obscurity. I think Tom can make so more ports are included, right now it's only port 80, perhaps a range from 8000 - 9000 or all port for the server IP I don't think Tom can do that, because every plugin has his own html/webserver framework. I think you have to ask the plugin maintainer if they can add some sort of security. In case of slimserver you have to ask logitech!? Or Tom allows plugnins only to use a frame inside his code, and you have to authenticate there, before you can see/edit those pages.....

hmmm. I get some wired messages: Apr 28 11:38:51 nas kernel: scsi_verify_blk_ioctl: 36 callbacks suppressed Apr 28 11:38:51 nas kernel: hdparm: sending ioctl 2285 to a partition! Apr 28 11:38:53 nas last message repeated 5 times Apr 28 11:38:53 nas kernel: smartctl: sending ioctl 2285 to a partition! Apr 28 11:38:53 nas last message repeated 3 times Apr 28 11:39:54 nas kernel: scsi_verify_blk_ioctl: 36 callbacks suppressed Apr 28 11:39:54 nas kernel: hdparm: sending ioctl 2285 to a partition! Apr 28 11:39:56 nas last message repeated 5 times Apr 28 11:39:56 nas kernel: smartctl: sending ioctl 2285 to a partition! Apr 28 11:39:56 nas last message repeated 3 times Apr 28 11:40:56 nas kernel: scsi_verify_blk_ioctl: 36 callbacks suppressed Apr 28 11:40:56 nas kernel: hdparm: sending ioctl 2285 to a partition! Apr 28 11:40:56 nas last message repeated 3 times Apr 28 11:40:58 nas kernel: mdcmd (32): spindown 4 Apr 28 11:40:59 nas kernel: hdparm: sending ioctl 2285 to a partition! Apr 28 11:40:59 nas kernel: hdparm: sending ioctl 2285 to a partition! Apr 28 11:40:59 nas kernel: smartctl: sending ioctl 2285 to a partition! Apr 28 11:40:59 nas last message repeated 3 times Apr 28 11:41:59 nas kernel: scsi_verify_blk_ioctl: 36 callbacks suppressed Apr 28 11:41:59 nas kernel: hdparm: sending ioctl 2285 to a partition! Apr 28 11:42:01 nas last message repeated 5 times Apr 28 11:42:01 nas kernel: smartctl: sending ioctl 2285 to a partition! Apr 28 11:42:01 nas last message repeated 3 times Apr 28 11:43:01 nas kernel: scsi_verify_blk_ioctl: 36 callbacks suppressed Apr 28 11:43:01 nas kernel: hdparm: sending ioctl 2285 to a partition! Apr 28 11:43:03 nas last message repeated 5 times Apr 28 11:43:03 nas kernel: smartctl: sending ioctl 2285 to a partition! Apr 28 11:43:03 nas last message repeated 3 times do I need to worry?

Hi speeding_ant, thanks for this plugin. works great. ....but you don't create the daapd user in your scripts, the users have to do it themselves. Maybe you could mention this in your first post. spidi

@mgworek you installed your plex Library on /mnt/disk1/plex. This is maybe a reason why disk1 doens't spin down.

VERY VERY VERY Nice work, BIG THANKs for that!!!!!

it works with unraid. But I had to start it as root. (the config and pid file etc. is under /root/.couchpotato) You only get some error messages without git.

just do: chmod +x sabToSickBeard.py

looks good at the moment. is sabToSickBeard.py executable and has the user which run sabnzbd has the ownership of this file(s). if you run SAB as nobody it has to look like this: ls -al * -rw-r--r-- 1 nobody users 72 2011-08-23 22:05 autoProcessTV.cfg -rw-r--r-- 1 nobody users 71 2011-08-23 12:26 autoProcessTV.cfg.sample -rw-r--r-- 1 nobody users 2745 2011-08-23 12:26 autoProcessTV.py -rw------- 1 nobody users 2615 2011-08-25 04:40 autoProcessTV.pyc -rwxr-xr-x 1 nobody users 979 2011-08-23 12:26 hellaToSickBeard.py* -rwxr-xr-x 1 nobody users 1048 2011-08-23 12:26 sabToSickBeard.py*

did you copy the autoProcessTV.cfg.sample to autoProcessTV.cfg and did the corresponding changes to your needs? (if you changed the port)