Micaiah12

Members
  • Posts

    94
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

Micaiah12's Achievements

Apprentice

Apprentice (3/14)

1

Reputation

  1. Hey all, Just an update. My docker containers were all stopped and when I attempted to start it would throw an error 403. I grabbed the Diagnostics and rebooted, but now it's doing the same exact thing, posting to a colored screen and it's unavailable on the network. tower-diagnostics-20230710-1409.zip
  2. Hey @JorgeB I performed those steps and was able to get things up and running. The array is starting now and It looks like all my shares and applications are coming back (I was able to move the entire config folder to the USB). When I created a new USB, I used the latest UNRAID version as well, so I am not sure if the new system files were the fix or if it was the upgraded version.
  3. This worked, I am able to boot it up and get the Unraid GUI. What should my next steps be?
  4. Hey all, my server has been super stable for some time now. However yesterday it was unresponsive and I wasn’t able to SSH into it or anything. I unfortunately had to do a hard reset and now when I boot up Unraid, I get this colored screen (the color changed based on the boot option I select). I’m unable to access the web console or SSH. I have ruled out memory as the memtest passed last night. My GPU is fine? Since the bios and memtest work just fine. So I’m not really sure when to to do here. Would love some advice though. Thanks!
  5. Anyone having luck with Plex? I have the below settings. And I am getting 502 bad gateway error.
  6. Right. Ok I think I can do that. Can't I use a USB disk for this?
  7. So once I rebuild onto new disk. I drop that new disk and put the old one back in?
  8. Ok so the plan after I have now replaced the failing sata card. I know disk 4 is in a bad data state. It was in the process of rebuilding when the server crashed. So I know that the rebuild wasn't complete. Which means that the disk is incomplete even though unraid is saying its fine (mainly because of me resetting the disk config to get disk 1 back online). So, I need to rebuild disk 4 either I need to start over or rebuild from when it stopped. So how is the best way to do that. I know the parity is good. I just need to get disk 4 rebuilt without loosing data. Does that help?
  9. Cool sounds good. I will start the rebuild.
  10. Hey guys. Good news. LSI card came in. Flashed it and threw it into the server. I already have an up-time of 30 min already with no crashing. It seems like the logs are complaining about the file system on disk 4 which I know is partially rebuilt. It's fine, I should be able to kick off the parity sync and it should correct that yeah? Do you still want system logs?
  11. I went to sys log. Turned it on for both ports. Selected a share and then put in the server ip and then enabled mirrored to flash option. Wouldn’t that make the syslog be on the flash drive? and yes I have a firm belief that the data card is bad. It’s the only think I switched over when I changed new hardware. I already have a new lsi card on order should be here in a couple of days. I can boot the server up again and post a new diagnostics tonight. Thanks!
  12. I've attached the syslog that I mirrored to the USB drive. syslog
  13. So if I use the new configuration option I can probably get the array back online but disk 4 will need to be rebuilt from the parity?
  14. I went to do that. Powered unraid on, but now looks like I lost another drive, this time it's disabled entirely. I'm afraid that if I start the array I am going to have two emulated disks and I won't have my data in parity. Wondering now what the best option is. I don't know if the constant resets got to this or if the sata controller really is messed up and has been causing issues all along. Sorry guys, really trying to get you the logs, how should I precede?