spl147

Members
  • Posts

    484
  • Joined

  • Last visited

  • Days Won

    1

spl147 last won the day on April 19 2022

spl147 had the most liked content!

Converted

  • Gender
    Undisclosed

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

spl147's Achievements

Enthusiast

Enthusiast (6/14)

28

Reputation

  1. Set min fan speed to 10 instead of 1.5
  2. I changed from 1.1.1.1 to 8.8.8.8 and the issue is resolved, not sure what is wrong with cloudfare, been using it for years
  3. loading the plugin page takes a long time, then checking takes a while, the some plugins say not available. server-diagnostics-20240321-1036.zip
  4. Google my friend, google
  5. First step would be to try them from the command line to see if they actually work!
  6. a little googling forund this: For fan settings we have below information: Below IPMI command format for fan control. Set Fan Control 0x3c 0x16 Byte1: 0x02 Byte2: FAN_NO Byte3: Duty1 Byte4: Duty2 Byte5: Duty3 Byte6: Temp1 Byte7: Temp2 Byte8: Temp3 Get Fan Control 0x3c 0x16 Byte1: 0x03 Byte2: FAN_NO Ex. Get fan 1 status $ Ipmitool -I lanplus -H 192.168.50.43 -U admin -P admin raw 0x3c 0x16 0x03 0x01 – 01 0a 32 64 14 50 5f Ex. Set fan 1 $ipmitool -I lanplus -H 192.168,50.43 -U admin -P admin raw 0x3c 0x16 0x02 0x01 0x14 0x32 0x64 0x14 0x50 0x5f - 01 14 32 64 14 50 5f
  7. You have the wrong fan selected
  8. Should of made sure the board you were gonna use was supported first!
  9. whats the output of sensors detect?
  10. did you actually read the output? the answers you seek are in the output! Trying family `ITE'... Yes Found unknown chip with ID 0x8688 Sorry, no sensors were detected. Either your system has no sensors, or they are not supported, or they are connected to an I2C or SMBus adapter that is not supported. If you find out what chips are on your board, check https://hwmon.wiki.kernel.org/device_support_status for driver status.
  11. But the container still sees All the servers memory:
  12. is --memory=1G not correct to limit memory usage by a docker? im getting this error: --memory=1G 'oznu/homebridge' WARNING: Your kernel does not support swap limit capabilities or the cgroup is not mounted. Memory limited without swap.