umax

Members
  • Posts

    55
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

umax's Achievements

Rookie

Rookie (2/14)

2

Reputation

  1. I need to finally swap out marvel based sas cards. I am using Supermicro X8SIA-F board with PCIe 2.0 slots. On ebay, the cheapest cards are newer PCIe 3.0, specifically 9207-8i can be bought for 20€, while 9211-8i are 30€. Since the difference is minimal, I am leaning more towards 9207 in case I upgrade the MB in the future, but if for any reason 9211 are better performing in native 2.0 slots I would go with that. Any thoughts?
  2. Here they are, thanks unraid-diagnostics-20221019-1040.zip
  3. Hi, I have successfully converted my two new ssd into raid0 btrfs, folowed the step to move appdata onto array and than back to cache pool, but now my dockers are acting up. I only use three of them, deluge, krusader and roon. Deluge refuses to connect to WebUi, krusader is giving me some vnc error and my roon clients are unable to reach roonserver. What should I do?
  4. Thanks! Can I use Btrfs file system on new cache drive and just follow the above steps?
  5. My cache drive only has 2GB left since I use it to store Roon library on it. Beside that I use it for 4 docker's and thats it, no mover, etc.. What is the right way to migrate everything from existing ssd to a new one? Is there a line code to clone everything? I have attached diagnostic file from my server, maybe someone can check if there is something else on the cache drive or/if something could be optimised (docker image allocation size)? Thanks in advance! unraid-diagnostics-20221007-1943.zip
  6. Thank you, got it through by opening ports as per your edit on 1st page! My favourite docker on unraid! Roon rules, now on the go!
  7. It went smooth on my side, updated as usual, I just need to figure out the port forwarding now for the ARC in order to ba able to stream music from outside
  8. To not open new thread, will AOC-SASLP-MV8 (not ver. "2") work with Seagate X18 18TB drives? I have 16 x 10TB connected to two of this controllers without issue. Is there anything different regarding drives past 10TB mark?
  9. I am struggling to understand how to import from server function works. Whatever path I try to use, lychee is saying; Given path is not a directory (/mnt/user/Pictures) Also, where does lynchee creates folder for pictures (/uploads)? This is my lychee log; 2017-09-02 23:41:27 - error - Lychee\Modules\Database::createTables (180) - Table 'lychee.lychee_settings' doesn't exist 2017-09-02 23:41:27 - error - Lychee\Modules\Database::createTables (225) - Table 'lychee.lychee_albums' doesn't exist 2017-09-02 23:41:27 - error - Lychee\Modules\Database::createTables (248) - Table 'lychee.lychee_photos' doesn't exist 2017-09-02 23:42:57 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/nmt/users/PiCTURES/TEST) 2017-09-02 23:45:22 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/nmt/users/PiCTURES/TEST) 2017-09-02 23:59:16 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/users/PiCTURES/TEST) 2017-09-03 00:00:56 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/users/PiCTURES/Thumbs) 2017-09-03 00:01:32 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/PiCTURES/TEST) 2017-09-03 00:13:43 - notice - Lychee\Modules\Session::login (81) - User (umax) has logged in from 192.168.1.7 2017-09-03 00:14:30 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/users/PiCTURES) 2017-09-03 00:15:25 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/nmt/users/PiCTURES) 2017-09-03 00:21:50 - notice - Lychee\Modules\Session::login (81) - User (umax) has logged in from 192.168.1.7 2017-09-03 00:23:17 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/user/Pictures) 2017-09-03 00:26:42 - notice - Lychee\Modules\Session::login (81) - User (umax) has logged in from 192.168.1.15 2017-09-03 00:39:43 - notice - Lychee\Modules\Session::login (81) - User (umax) has logged in from 192.168.1.7 2017-09-03 00:40:58 - error - Lychee\Modules\Import::url (56) - Photo format not supported (/mnt/user/PiCTURES/) 2017-09-03 00:41:24 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/user/PiCTURES) 2017-09-03 00:41:50 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/user/PiCTURES/boatTrip13-zaGledat) 2017-09-03 00:46:31 - notice - Lychee\Modules\Session::login (81) - User (umax) has logged in from 192.168.1.7 2017-09-03 00:46:53 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/user0/PiCTURES) 2017-09-03 00:48:42 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/mnt/disk7/PiCTURES) 2017-09-03 00:49:17 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/disk7/PiCTURES) 2017-09-03 00:49:33 - error - Lychee\Modules\Import::server (106) - Given path is not a directory (/PiCTURES)
  10. That one of the disk (disk3 in my case) has 3x times less reads than all of the others in parity build operation?
  11. Something is wrong with disk 10 (md10) ... put in my precleared spare disk, started rebuild but log is throwing out same errors. What to do? Should I stop the rebuild? https://www.zipshare.com/download/eyJhcmNoaXZlSWQiOiI0ZTViYzYxZS1kYmZlLTRkMzMtYWU1Yi04NGFlYWU3NjFmY2QifQ==
  12. After upgrading to 6.1.7 all my shares are missing. The files on disk share are intact. When I try to recreate the user share I got message "Share X has been deleted.". In syslog there is just this; Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 32 bytes) in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(279) : eval()'d code on line 73
  13. That was it! Kudos & respect for your work Btw, is there a tuneable option for faster real-time refreshing?
  14. can anyone confirm my situation? i try different browsers and systems, so it must be something on the server side.