preproman

Does anyone know if there is a Docker crated for the Lumin Music Server. Somehow QNAP and Sinology are comparable. Thanks Darryl

OK makes sense to me. I will do the upgrade first. Thanks for the info. Darryl

Thanks - I will I will upgrade next..

Version 5.0-rc11 Are there any procedures for swapping parity drives? Going from a 4TB to a 6TB. Thanks

Got it. Thanks that's what I needed..

I'm changing the disk in drive 20 to drive 22. How do I get drive 20 to clear out all info from the disk I removed? I stopped the array, unassigned it, started the array backup. But the info is still there i.e.. 4tb and what's left on the disk. How do I get it to be clear? Below is the error i'm getting. I need to clear the "not installed" on drive 20 so I can add the disk to drive 22. If you know what I'm saying.. "You may not add new disks when there exists missing, wrong, or disabled disk(s)."

Sorry about that. Yes, I'm using the 5.0-beta12 version.

I would like to clear out two drive spots. How do I re build the parity to do so? Thanks

What should I do with the disk: Return it? Run it again?

Syslog is attached. Yes they all show up in the Bios. I'm fine with the drives being cleared. I have backups on USB external drives. "You can un-assign all the failed drives, and then set a new disk configuration, but if you then try to re-assign them to an existing array they will be cleared UNLESS you set a new disk configuration immediately before adding them each in turn." How do I do this? syslog-2012-09-08.txt

Hello, I have got 1 red ball after another out of nowhere. Now I have a total of 4. I guess it must be coming from the re booting of the server multiple times. I know I need to get some disk drives. (I have a few on order). Right now I want to get the server to list all 4 of these drives as unassigned so it can come up and I can still use it. How do I clear them out and get them listed as unassigned? version: 5.0-beta12 Is this a good time to upgrade the version? syslog attached. syslog-2012-09-08.txt

Hello, I need instruction on how to run reiserfsck with the --rebuild-sb. I ran reiserfsck --check. It told me I need to run rebuild-sb. version: 5.0-beta12 Any instructions? Darryl

Yep. It work. I did it from the console. I was trying to delete it from a Mac not Windows.. Thanks for the help

Good news. I ran --check. It told me to run --rebuild-tree. I ran it early this morning, got back all is good. Now, how can i delete the lost+found fold on the drive? It has 0 items inside but yet it says I don't have permission to do this operation.

Got home today after work to find multiple errors on the server monitor. This is after a rebuild of disk 6 last night and a parity check this morning. Reiserfs error (device md6): vs-13070 reiserfs_read_locked_inode: i/o failure ocurred trying to find stat data of [3188 3189 0x0 SD] Syslog is attached. syslog-2012-08-01.txt.zip