j123ss Posted January 2, 2017 Share Posted January 2, 2017 Hi jakeandchase, Can you try increasing the timeouts in the settings ? Also, try setting manual timeout to 0 and add the server manually. What unRAID version are you running ? Upped timeout to 10,000 for auto and manual. Manual just goes back to the empty server screen and auto skips my server's IP as if the timeout setting is 0? I also attempted this with timeout of 0, same result. unRAID 6.2.4 ok, I'll send you a pm to troubleshoot this. I am experiencing this identical issue. I just installed the iOS app and unRaid plugin. iphone 6 plus running iOS 10.2 Quote Link to comment
jbrodriguez Posted January 4, 2017 Author Share Posted January 4, 2017 I've just submitted for review an app update. It fixes the issue with the app hanging when invoking an operation. Also some additional debug logic. I'll post back when it's available in the stores. Quote Link to comment
jbrodriguez Posted January 4, 2017 Author Share Posted January 4, 2017 ... I am experiencing this identical issue. I just installed the iOS app and unRaid plugin. iphone 6 plus running iOS 10.2 Hi j123ss, By any chance, are you running your server on a static ip address ? Quote Link to comment
j123ss Posted January 4, 2017 Share Posted January 4, 2017 ... I am experiencing this identical issue. I just installed the iOS app and unRaid plugin. iphone 6 plus running iOS 10.2 Hi j123ss, By any chance, are you running your server on a static ip address ? No it is set to "Automatic" It is static from the router though, so it never changes. I will let you know if the update changes anything, thanks! Quote Link to comment
jbrodriguez Posted January 6, 2017 Author Share Posted January 6, 2017 Ok, v2.3.1 is now available on both stores (or should be pretty soon) This is a maintenance release: - Fix issue where the app hangs after invoking a server operation - Update network stack - Add debug logic Also in this release: - General improvements and bug fixes It should help troubleshoot some connection issues. Quote Link to comment
splnut Posted January 7, 2017 Share Posted January 7, 2017 I was having the same issues as others. I just updated to the latest version and it find my server immediately. Great job. Quote Link to comment
jbrodriguez Posted January 8, 2017 Author Share Posted January 8, 2017 I was having the same issues as others. I just updated to the latest version and it find my server immediately. Great job. That's good to know splnut ! Another user was also able to connect. Quote Link to comment
j123ss Posted January 8, 2017 Share Posted January 8, 2017 Sadly I still cannot connect both the plugin and iOS app are updated. Edit: I will say it sits and spins for longer than the previous version. It acts like it's trying. Quote Link to comment
jbrodriguez Posted January 8, 2017 Author Share Posted January 8, 2017 Sadly I still cannot connect both the plugin and iOS app are updated. Edit: I will say it sits and spins for longer than the previous version. It acts like it's trying. Sorry to hear that j123ss. I'll pm you to troubleshoot the issue. Quote Link to comment
jbrodriguez Posted January 8, 2017 Author Share Posted January 8, 2017 Well, another user was able to connect to the server .. it was a port matter. Please use the unRAID webGUI's port in the app, this is the officlal port to use. Quote Link to comment
binhex Posted January 13, 2017 Share Posted January 13, 2017 just purchased this to show support for dev, just literally going through the initial config right now, spotted a minor issue in that ContrlR tries to verify your ip address before you have finished when adding a server manually, maybe verify ip address is valid only when you switch field not after each octet is entered?. Quote Link to comment
jbrodriguez Posted January 13, 2017 Author Share Posted January 13, 2017 just purchased this to show support for dev, just literally going through the initial config right now, spotted a minor issue in that ContrlR tries to verify your ip address before you have finished when adding a server manually, maybe verify ip address is valid only when you switch field not after each octet is entered?. Thanks a lot binhex ! I'll look into this. Quote Link to comment
JorgeB Posted January 15, 2017 Share Posted January 15, 2017 I have a small visual issue on my tablet, some option use two lines, like OPS, VMS, LOGS, I tried the smaller text option but it's the same, although it doesn't really make sense since bigger options like DOCKERS and SHARES appear fine, also it's the same in portrait or landscape. Quote Link to comment
mata7 Posted January 17, 2017 Share Posted January 17, 2017 are you planing on make this app on the ipad, to use full screen resolution Quote Link to comment
jbrodriguez Posted January 17, 2017 Author Share Posted January 17, 2017 I have a small visual issue on my tablet, some option use two lines, like OPS, VMS, LOGS, I tried the smaller text option but it's the same, although it doesn't really make sense since bigger options like DOCKERS and SHARES appear fine, also it's the same in portrait or landscape. Yes, that's really strange ! The next release is an update to the core libraries, I'll check if there's something that may fix this. Quote Link to comment
jbrodriguez Posted January 17, 2017 Author Share Posted January 17, 2017 are you planing on make this app on the ipad, to use full screen resolution Honestly, I'm not completely sure, but I'll look into it. If this means I need a separate codebase, I'll most likely not do it. Quote Link to comment
mata7 Posted January 17, 2017 Share Posted January 17, 2017 i hope you can do it, app dont look good on the ipad with iphone resolution, just my opinion anyways thanks Quote Link to comment
thejamkel Posted January 20, 2017 Share Posted January 20, 2017 Hey there, been using your app a log time. I noticed the logs section required a plugin to work. I've installed and enabled the plugin however I still don't seem to be able to get any logs shown (Android device). Any ideas? Quote Link to comment
Sparkum Posted January 21, 2017 Share Posted January 21, 2017 I actually came here to ask the very same question. Bought the app roughly 2 weeks ago, installed the plugin 10 minutes later, nothing has ever shown up under logs. Quote Link to comment
jbrodriguez Posted January 21, 2017 Author Share Posted January 21, 2017 i hope you can do it, app dont look good on the ipad with iphone resolution, just my opinion anyways thanks Thanks mata7, I'll see if I can improve that. Quote Link to comment
jbrodriguez Posted January 21, 2017 Author Share Posted January 21, 2017 Hi thejamkel and Sparkum, Can you check the plugin logs (/boot/logs/controlr.log) ? Do they show anything unusual ? Like a warning or error ? Let me know. Quote Link to comment
Sparkum Posted January 22, 2017 Share Posted January 22, 2017 Thanks for the reply. I've attached a screenshot oh what my logs show, this just again and again. Quote Link to comment
jbrodriguez Posted January 22, 2017 Author Share Posted January 22, 2017 Thanks for the reply. I've attached a screenshot oh what my logs show, this just again and again. It shows no activity (other than starting/stopping). Can you access the plugin's web ui (http://<server>:2378/) ? That should log something. Let me know how it goes, eventually I'll pm you to further troubleshoot. Quote Link to comment
thejamkel Posted January 27, 2017 Share Posted January 27, 2017 Hi there, Sorry for the delay. The page loads but when i try to login it says unable to connect to server. 401 unauthorised. I've not bothered as my server is in my home adding a password to the default root user could this be the cause? -J Quote Link to comment
Squid Posted January 27, 2017 Share Posted January 27, 2017 jbrodriguez, it does appear that ControlR needs some modifications for 6.3.0-rc9 http://lime-technology.com/forum/index.php?topic=55988.0 We found a missing csrf_token error during rc8 testing. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.