whocares33

Members
  • Posts

    5
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

whocares33's Achievements

Noob

Noob (1/14)

0

Reputation

  1. Yes, according to those specs you should be able to push 10G. FS does have shield cables over 10m just have to select the custom page. http://www.fs.com/products/64200.html The cable matters is much cheaper, so i'd try them first.
  2. How long are your runs? I'd look into doing fiber with SPF+ transceivers. I hear http://www.fs.com/ is highly recommend for cables whether you're getting fiber or copper cables.
  3. Sweet, I also put in a few Fractal fans in mine. While I'm not 100% sure this is how i fixed the issue. This post looks what I did to lower the speed. https://calvin.me/quick-how-to-decrease-ipmi-fan-threshold/
  4. Your new build is nearly identical to what i built a few months ago! Same motherboard and a similar process and number of drives. I kept my stock heatsink, while it's the only fan I hear, it's not bad at all. No issues with temps either. I also replaced all my case fans with much quieter fans, though the Supermicro fan headers don't like the low fan speed and kept revving them up and down. To fix it you have to manually lower the minimum fan speed of the fans. I just added a mellanox Connectx-2 10Gb network card to the build and a one on my workstation. this thing flies!
  5. I'd look at this build, if i was to go all out on hardware... http://lime-technology.com/forum/index.php?topic=52390.0