adz2000

Members
  • Posts

    13
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

adz2000's Achievements

Noob

Noob (1/14)

0

Reputation

  1. Some info others may find useful, I found a problem a couple weeks ago with SabnzbdVPN not displaying the Public IPv4 address and Nameserver / DNS Lookup (same error seen in some posts above). After much trial and error i was able to fix the problem by deleting the 209.222.18.222 name sever from the config. It look like that server is timing out most of the time. It looks like the DelugeVPN docker has the same server configured by default as well.
  2. No luck get same memory leak on 1.3.4.3285-b46e0ea as well; a new Plex version was released a few days ago but i also see the memory leak there as well. No idea how to fix it, perhaps an update will be released eventually that fixes the problem, until then i guess I'll just have to put up with it, adding an extra 8GB has helped as the crash only happens every couple days now. One thing that is better using the Docker, is only the Docker crashes now instead of the entire system when using the Phaze plugin. The docker also seems to automatically restart after a crash so other may have the issue and not even know unless the crash happen when they're watching something. Regards, Adz
  3. Ok I've figured out how to force the downgrade, what i did was change the Container Variable: VERSION to 1.3.4.3285-b46e0ea fingers crossed this fixes it Regards, Adz
  4. Hi georgeq, I'm using Linuxserver.io and it was working great until i upgraded to latest plex version, before that i had the Phaze plugin also on latest version of Plex (same mem leak issue). My guess is the problem started with version Plex Media Server 1.4.1 or 1.4.2, i'm trying to figure out how to force the docker to downgrade. If i get it working i'll let you know. As getting buying extra memory i'm not suggesting this will fix the problem but only delay the system crash so i don't need to restart the docker daily to free up memory, currently plex is leaking about 1GB per day. My 4GB system normally runs out at about 61% usage, right now its 91% and climbing. Adz
  5. Hi georgeq, I have the exact same problem, been running plex (plugin not docker) for years without issue but a couple weeks ago i started seeing very mem usable to the point where the unraid system crashed completely (usually take about 24 hours). I switched to using a docker and this fixed the issue a week or so and then i updated the latest version and problem started again. I'm amazed there hasn't been more people reporting this issue, the only thing i can think of is most people have more than 4GB RAM. Either way i think the current Plex version is has issues with memory leaks, i'm trying to figure how to downgrade to earlier version. I've also bought another 8GB of RAM to hopefully this will help. Regards, ADZ
  6. Dear All, I'm wanting a buy a IBM ServeRAID M1015 (or Dell equivalent) that has a full height bracket (and ideally flashed to IT mode). I currently have a AOC-SASLP-MV8 that is starting to play up and need to replace it before it dies. I've seen a few of these on ebay but mainly coming from Hong Kong or China and i am wary they might be fake. Unit will need to be shipped to Australia. Let me know if you have one to sell. ADZ P.S If anyone knows a reliable ebay seller that would also be appreciated
  7. Thanks BRiT, I'm glad i asked the question. The current setup i have works well, so fortunately i can wait.
  8. Hi there, I wondering anyone could provide some advice on the best way to upgrade from 5.0-rc15a + Simple Features to 5 Final. Essentially i have a couple of plugins running with Simple features (sickbeard, CouchPotato, Sabnzdb) that i really don't want to lose so I'm a little worried about the affect of the upgrade process to these programs. Regards, Adz
  9. Thanks johnodon, I'll give the upgrade a go tonight.
  10. Really simple question for experts; I have a version 1.0.5 installed and i want to go to the latest version. Do i just download the latest zip and extract to the plugins folder or do i have delete the old files first? Thanks in advance, Adz
  11. I have the NZXT Whisper Full-tower and its a good cheap case. Definite potential to get 20 drives in it, 9 internal and 7 external bays (2 X 5 in 3 + 1 on rails). My internal drives run between 32c - 44c degrees and externals usual run around the 40c mark. I see only two minor issues with it; 1) very heavy even when not fully stacked with drives, 2) cooling fans not very powerful (would benefit from a couple Noctua's but that would boost the price). Regards, Adz
  12. Hi All, Some good news I've managed to get back into my shares again. Essentially i backed up my Unraid install and then reformatted the USB stick and loaded beta 5.08b. I then copied share config files and my pro install key. Everything fired up alright after reassigning the disk, parity check and running the permissions util. I have no idea why the problem occurred the first place but there may have been some corrupt files on the USB stick. Back to my original issue about some files never leaving the cache disk, i think this is because i had my split level set 1 on all shares (i've now put it on 999). When i ran the new mover script manually i could see a lot of messages in the log about drives being full (this is the case with 2 of my disks). I have since been able to get some data to move and i think if i clear some space on the two full disk the rest will go as well. Thanks for your help Rajahal. Regards, Adz
  13. Hi Guys, I have an issue with Unraid in that i can no longer map my shares from Windows after disabling the cache. I originally disabled the cache as i noticed 150GB of files were not moving to the array even manually forcing the mover script. I can access Unraid via the web interface and all the data seems to be there as far as i can tell (drives seem to show the space has been used). A parity check has been run and this passes with no errors. I even tried updating from 4.7 to the latest beta but this did not help. I'm really keen not to have to rebuild as i don't have enough space elsewhere to relocate the data. Has anyone experienced this issue before, if so what did you do to solve it? I can post a log file but not sure how to do this as i can't even map the flash share. Regards, Adz