[SOLVED] Unable to stop array, disk 1 will not unmount


Recommended Posts

I've been running Unraid 4.7 with mysql on my first server for about 2 weeks (1 week with mysql installed). Server has 2 x data disks (no parity disk yet).

 

I have been using the powerdown script to shut down the server (which has been working perfectly).

 

However today I needed to stop the array to make some changes .When I click stop in the control panel, disk 2 will unmount, but disk 1 will hang on unmounting and the server locks up. I have to run the powerdown script from the command line and shut the server down.

 

I did some searching and discovered that something is obviously running on disk 1 and preventing it from unmounting.

 

I found some instructions to identify the offending process:

 

/usr/bin/fuser -mv /mnt/disk* /mnt/user/*

 

The result:

 

             USER    PID          ACCESS        COMMAND
/mnt/disk1: root     1844         F.c..         mysqld

 

So ...Mysql is stopping disk 1 from being unmounted.

 

So I found this to stop mysql running:

 

killall mysqld

 

I ran it and it then I re-ran:

 

/usr/bin/fuser -mv /mnt/disk* /mnt/user/*

 

and it simply returned me to the prompt, so I assumed this meant nothing was running.

 

I went to the control panel and clicked stop, this time expecting the array to stop, but again it hung on unmounting disk 1, exactly as before.

 

So now I do not know how to proceed.

 

Here is the tail end of the log file where it hung:

 

Aug  4 06:37:12 NAS status[2698]: State: STARTED
Aug  4 06:37:12 NAS status[2698]: D#           Model / Serial          Status         Device    
Aug  4 06:37:12 NAS status[2698]: 0      rdevModel.0 / rdevSerial.0    DISK_DSBL_NP   rdevName. 
Aug  4 06:37:12 NAS status[2698]: 1  WDC WD20EARS-00 / WD-WCAZA3646980 DISK_OK        sda       
Aug  4 06:37:12 NAS status[2698]: 2  WDC WD10EADS-11 / WD-WCAV53474284 DISK_OK        sdb       
Aug  4 06:37:12 NAS status[2698]: SMART overall health assessment
Aug  4 06:37:12 NAS status[2698]: /dev/sda: smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Aug  4 06:37:12 NAS status[2698]: Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
Aug  4 06:37:12 NAS status[2698]: SMART overall-health self-assessment test result: PASSED
Aug  4 06:37:12 NAS status[2698]: /dev/sdb: smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Aug  4 06:37:12 NAS status[2698]: Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
Aug  4 06:37:12 NAS status[2698]: SMART overall-health self-assessment test result: PASSED
Aug  4 06:37:12 NAS status[2698]: /dev/sdc: smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Aug  4 06:37:12 NAS status[2698]: Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
Aug  4 06:37:12 NAS status[2698]: /dev/sdc: Unknown USB bridge [0x0718:0x0533 (0x100)]
Aug  4 06:37:12 NAS status[2698]: Smartctl: please specify device type with the -d option.
Aug  4 06:37:12 NAS status[2698]: Use smartctl -h to get a usage summary
Aug  4 06:37:13 NAS status[2698]: No active PIDS on the array
Aug  4 06:37:14 NAS rc.unRAID[2723]: Killing active pids on the array drives
Aug  4 06:37:14 NAS rc.unRAID[2733]: Umounting the drives
Aug  4 06:37:14 NAS rc.unRAID[2737]: umount: /mnt/disk1: device is busy
Aug  4 06:37:14 NAS rc.unRAID[2737]: umount: /mnt/disk1: device is busy
Aug  4 06:37:14 NAS rc.unRAID[2739]: Stopping the Array
Aug  4 06:37:14 NAS kernel: mdcmd (13): stop 
Aug  4 06:37:14 NAS kernel: md: 2 devices still in use.
Aug  4 06:37:15 NAS emhttp: shcmd (36): umount /mnt/disk1 >/dev/null 2>&1
Aug  4 06:37:15 NAS emhttp: _shcmd: shcmd (36): exit status: 1
Aug  4 06:37:15 NAS emhttp: shcmd (37): rmdir /mnt/disk1 >/dev/null 2>&1
Aug  4 06:37:15 NAS emhttp: _shcmd: shcmd (37): exit status: 1
Aug  4 06:37:15 NAS emhttp: Retry unmounting disk share(s)...

 

Can someone give me a hand with where to go from here.

 

Thanks

 

 

 

 

 

 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.