[Support] binhex - DelugeVPN

binhex · October 23, 2016

Hi!

I'm completely new to unraid and dockers.

I have a problem. I'm getting ERR_CONNECTION_REFUSED when I try to get to WebUI. I've set LAN_NETWORK Key 12 tp: 192.168.2.0/24 (Unraid machine IP: 192.168.2.5).

Am I missing something?

Thank you in advance!

Please post your supervisord.log file

Sent from my SM-G900F using Tapatalk

Trylo · October 23, 2016

Hi!

I'm completely new to unraid and dockers.

I have a problem. I'm getting ERR_CONNECTION_REFUSED when I try to get to WebUI. I've set LAN_NETWORK Key 12 tp: 192.168.2.0/24 (Unraid machine IP: 192.168.2.5).

Am I missing something?

Thank you in advance!

Please post your supervisord.log file

Sent from my SM-G900F using Tapatalk

Attached.

supervisord.zip

binhex · October 23, 2016

Hi!

I'm completely new to unraid and dockers.

I have a problem. I'm getting ERR_CONNECTION_REFUSED when I try to get to WebUI. I've set LAN_NETWORK Key 12 tp: 192.168.2.0/24 (Unraid machine IP: 192.168.2.5).

Am I missing something?

Thank you in advance!

Please post your supervisord.log file

Sent from my SM-G900F using Tapatalk

Attached.

ok youve left the port on the default value of 1198, is that the port thats defined in the ovpn file?, what vpn provider are you using?

Trylo · October 23, 2016

Hi!

I'm completely new to unraid and dockers.

I have a problem. I'm getting ERR_CONNECTION_REFUSED when I try to get to WebUI. I've set LAN_NETWORK Key 12 tp: 192.168.2.0/24 (Unraid machine IP: 192.168.2.5).

Am I missing something?

Thank you in advance!

Please post your supervisord.log file

Sent from my SM-G900F using Tapatalk

Attached.

ok youve left the port on the default value of 1198, is that the port thats defined in the ovpn file?, what vpn provider are you using?

It's CyberGhost. I'm not sure what port should it be set to.

mr-hexen · October 23, 2016

Check the ovpn file.

Trylo · October 23, 2016

Check the ovpn file.

So it's 443? (I've never popened ovpn file).

client
remote 4-cz.cg-dialup.net 443
dev tun 
proto udp
auth-user-pass

binhex · October 24, 2016

Check the ovpn file.

So it's 443? (I've never popened ovpn file).
client
remote 4-cz.cg-dialup.net 443
dev tun 
proto udp
auth-user-pass

Yes

Sent from my SM-G900F using Tapatalk

Trylo · October 24, 2016

OK, I copied the certificates and it's working now.

So Deluge won't start unless OpenVPN connection is established?

binhex · October 24, 2016

OK, I copied the certificates and it's working now.

So Deluge won't start unless OpenVPN connection is established?

Correct

Sent from my SM-G900F using Tapatalk

mr-hexen · October 24, 2016

OK, I copied the certificates and it's working now.

So Deluge won't start unless OpenVPN connection is established?

When VPN_ENABLED is set to 'yes'. If it's set to 'no' it will start.

Trylo · October 24, 2016

I have one more little issue: some files are downloading even though I mark them "Do not download".

JonathanM · October 24, 2016

I have one more little issue: some files are downloading even though I mark them "Do not download".

Torrent files are not very granular, oftentimes it's necessary to download a portion or all of a file you don't want in order to get the remaining piece for the file that you do. The size of the chunks is up to the person authoring the original torrent file, following general best practices and site guidelines.

pyrater · October 28, 2016

I had to reinstall this docker due to an issue i created lol. Anyway it will not start and it is stuck The log is below:

 


2016-10-27 18:43:39,369 INFO reaped unknown pid 653
2016-10-27 18:43:39,369 DEBG received SIGCLD indicating a child quit
2016-10-27 18:43:39,850 DEBG 'webui-script' stdout output:
[info] Starting Deluge webui...

2016-10-27 18:43:40,324 DEBG 'deluge-script' stdout output:
Setting random_port to False..
Configuration value successfully updated.

2016-10-27 18:43:40,874 DEBG 'deluge-script' stdout output:
Setting listen_ports to (29460, 29460)..
Configuration value successfully updated.

2016-10-27 18:43:40,927 DEBG 'deluge-script' stdout output:
[debug] VPN incoming port is 29460
[debug] Deluge incoming port is 29460
[debug] VPN IP is 10.X.X.X
[debug] Deluge IP is 10.X.X.X
[debug] Sleeping for 10 mins before rechecking listen interface and port (port checking is for PIA only)

Any tips to access the web gui?

pyrater · October 28, 2016

ErrorWarningSystemArrayLogin


2016-10-27 18:43:32.362107 [info] Starting Supervisor...
2016-10-27 18:43:32,678 CRIT Set uid to user 0
2016-10-27 18:43:32,678 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing
2016-10-27 18:43:32,684 INFO supervisord started with pid 1
2016-10-27 18:43:33,686 INFO spawned: 'start-script' with pid 110
2016-10-27 18:43:33,690 INFO spawned: 'webui-script' with pid 111
2016-10-27 18:43:33,693 INFO spawned: 'deluge-script' with pid 112
2016-10-27 18:43:33,696 INFO spawned: 'privoxy-script' with pid 113
2016-10-27 18:43:33,703 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2016-10-27 18:43:33,703 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2016-10-27 18:43:33,703 INFO success: webui-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2016-10-27 18:43:33,704 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2016-10-27 18:43:33,704 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2016-10-27 18:43:33,707 DEBG 'deluge-script' stdout output:
[info] deluge config file already exists, skipping copy

2016-10-27 18:43:33,708 DEBG 'deluge-script' stdout output:
[info] VPN is enabled, checking VPN tunnel local ip is valid

2016-10-27 18:43:33,710 DEBG 'privoxy-script' stdout output:
[info] Privoxy set to disabled

2016-10-27 18:43:33,711 DEBG fd 22 closed, stopped monitoring <POutputDispatcher at 47683840451072 for <Subprocess at 47683840325464 with name privoxy-script in state RUNNING> (stdout)>
2016-10-27 18:43:33,711 DEBG fd 26 closed, stopped monitoring <POutputDispatcher at 47683840451504 for <Subprocess at 47683840325464 with name privoxy-script in state RUNNING> (stderr)>
2016-10-27 18:43:33,712 INFO exited: privoxy-script (exit status 0; expected)
2016-10-27 18:43:33,712 DEBG received SIGCLD indicating a child quit
2016-10-27 18:43:33,715 DEBG 'start-script' stdout output:
[info] VPN strong certs defined, copying to /config/openvpn/...

2016-10-27 18:43:33,723 DEBG 'start-script' stdout output:
[debug] Environment variables defined as follows

2016-10-27 18:43:33,723 DEBG 'start-script' stdout output:
BASH=/bin/bash
BASHOPTS=cmdhist:complete_fullquote:extquote:force_fignore:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath
BASH_ALIASES=()
BASH_ARGC=()
BASH_ARGV=()
BASH_CMDS=()
BASH_LINENO=([0]="0")
BASH_SOURCE=([0]="/root/start.sh")
BASH_VERSINFO=([0]="4" [1]="3" [2]="42" [3]="1" [4]="release" [5]="x86_64-unknown-linux-gnu")
BASH_VERSION='4.3.42(1)-release'
DEBUG=true
DIRSTACK=()
ENABLE_PRIVOXY=false
EUID=0

)
HOME=/home/nobody
HOSTNAME=be363c89dfff
HOSTTYPE=x86_64
HOST_OS=unRAID
IFS=$' \t\n'
LANG=en_GB.UTF-8
LAN_NETWORK=192.168.1.0/24
MACHTYPE=x86_64-unknown-linux-gnu
NAME_SERVERS=8.8.8.8,37.235.1.174,8.8.4.4,37.235.1.177
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PGID=100
PIPESTATUS=([0]="0")
PPID=1
PS4='+ '
PUID=99
PWD=/
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments
SHLVL=1
STRONG_CERTS=yes
SUPERVISOR_ENABLED=1
SUPERVISOR_GROUP_NAME=start-script
SUPERVISOR_PROCESS_NAME=start-script
TERM=xterm
TZ=America/Denver
UID=0
VPN_CONFIG=/config/openvpn/openvpn.ovpn
VPN_DEVICE_TYPE=tun
VPN_ENABLED=yes
VPN_PASS=XXXXXXXXXXXXXXX
VPN_PORT=1198
VPN_PROTOCOL=udp
VPN_PROV=pia
VPN_REMOTE=nl.privateinternetaccess.com
VPN_USER=XXXXXXXXXXXXX
_='[debug] Environment variables defined as follows'
[debug] Directory listing of files in /config/openvpn as follows

2016-10-27 18:43:33,730 DEBG 'start-script' stdout output:
total 12
drwxrwxrwx 1 nobody users 73 Oct 27 18:43 .
drwxrwxr-x 1 nobody users 266 Oct 27 18:41 ..
-rwxr-xr-x 1 root root 2719 Oct 27 18:43 ca.rsa.4096.crt
-rwxr-xr-x 1 root root 1214 Oct 27 18:43 crl.rsa.4096.pem
-rwxr-xr-x 1 root root 223 Oct 27 18:43 openvpn.ovpn

2016-10-27 18:43:33,730 DEBG 'start-script' stdout output:
[debug] Contents of ovpn file /config/openvpn/openvpn.ovpn as follows...

2016-10-27 18:43:33,732 DEBG 'start-script' stdout output:
client
dev tun
resolv-retry infinite
nobind
persist-key
cipher aes-256-cbc
auth sha256
tls-client
remote-cert-tls server
auth-user-pass
comp-lzo
verb 1
reneg-sec 0
crl-verify crl.rsa.4096.pem
ca ca.rsa.4096.crt
disable-occ

2016-10-27 18:43:33,732 DEBG 'start-script' stdout output:
[info] VPN config file (ovpn extension) is located at /config/openvpn/openvpn.ovpn

2016-10-27 18:43:33,737 DEBG 'start-script' stdout output:
[warn] VPN provider remote port incorrect, overriding to 1197

2016-10-27 18:43:33,819 DEBG 'start-script' stdout output:
[info] Default route for container is 172.17.0.1
[info] Setting permissions recursively on /config/openvpn...

2016-10-27 18:43:33,830 DEBG 'start-script' stdout output:
[info] Adding 8.8.8.8 to /etc/resolv.conf

2016-10-27 18:43:33,837 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2016-10-27 18:43:33,843 DEBG 'start-script' stdout output:
[info] Adding 8.8.4.4 to /etc/resolv.conf

2016-10-27 18:43:33,850 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2016-10-27 18:43:33,850 DEBG 'start-script' stdout output:
[debug] Show name servers defined for container

2016-10-27 18:43:33,851 DEBG 'start-script' stdout output:
# Generated entries:
nameserver 8.8.8.8
nameserver 192.168.2.1
nameserver 8.8.4.4
nameserver 8.8.8.8
nameserver 37.235.1.174
nameserver 8.8.4.4
nameserver 37.235.1.177

2016-10-27 18:43:33,851 DEBG 'start-script' stdout output:
[debug] Show name resolution for VPN endpoint nl.privateinternetaccess.com

2016-10-27 18:43:34,059 DEBG 'start-script' stdout output:
;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 51687
;; flags: qr rd ra ; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;; nl.privateinternetaccess.com.	IN	A

;; ANSWER SECTION:
nl.privateinternetaccess.com.	300	IN	A	46.166.138.169
nl.privateinternetaccess.com.	300	IN	A	46.166.186.236
nl.privateinternetaccess.com.	300	IN	A	109.201.152.227
nl.privateinternetaccess.com.	300	IN	A	109.201.138.248
nl.privateinternetaccess.com.	300	IN	A	109.201.154.144
nl.privateinternetaccess.com.	300	IN	A	46.166.186.219
nl.privateinternetaccess.com.	300	IN	A	46.166.190.191
nl.privateinternetaccess.com.	300	IN	A	46.166.138.152
nl.privateinternetaccess.com.	300	IN	A	46.166.137.240
nl.privateinternetaccess.com.	300	IN	A	46.166.137.228
nl.privateinternetaccess.com.	300	IN	A	46.166.138.131
nl.privateinternetaccess.com.	300	IN	A	46.166.138.157
nl.privateinternetaccess.com.	300	IN	A	46.166.138.138

;; AUTHORITY SECTION:

;; ADDITIONAL SECTION:

;; Query time: 204 msec
;; SERVER: 37.235.1.177
;; WHEN: Thu Oct 27 18:43:33 2016
;; MSG SIZE rcvd: 254

2016-10-27 18:43:34,066 DEBG 'start-script' stdout output:
[info] Adding 192.168.1.0/24 as route via docker eth0

2016-10-27 18:43:34,067 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2016-10-27 18:43:34,069 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.2
192.168.1.0/24 via 172.17.0.1 dev eth0

2016-10-27 18:43:34,069 DEBG 'start-script' stdout output:
--------------------

2016-10-27 18:43:34,075 DEBG 'start-script' stdout output:
[debug] Modules currently loaded for kernel

2016-10-27 18:43:34,077 DEBG 'start-script' stdout output:
Module Size Used by
md_mod 36275 11
tun 16556 0
xt_nat 1849 4
veth 4665 0
ipt_MASQUERADE 1213 5
nf_nat_masquerade_ipv4 1865 1 ipt_MASQUERADE
iptable_nat 1831 1
nf_conntrack_ipv4 5810 2
nf_nat_ipv4 4327 1 iptable_nat
iptable_filter 1528 2
ip_tables 9422 2 iptable_filter,iptable_nat
nf_nat 9852 3 nf_nat_ipv4,xt_nat,nf_nat_masquerade_ipv4
forcedeth 48700 0
kvm_amd 45452 0
kvm 268324 1 kvm_amd
k10temp 2932 0
sata_mv 23743 11
sata_nv 18882 1
pata_amd 10543 0
acpi_cpufreq 6306 0

2016-10-27 18:43:34,077 DEBG 'start-script' stdout output:
[info] iptable_mangle module not supported, attempting to load...

2016-10-27 18:43:34,079 DEBG 'start-script' stderr output:
modprobe: FATAL: Module iptable_mangle not found in directory /lib/modules/4.4.26-unRAID

2016-10-27 18:43:34,080 DEBG 'start-script' stdout output:
[warn] iptable_mangle module not supported, you will not be able to connect to Deluge webui or Privoxy outside of your LAN

2016-10-27 18:43:34,128 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2016-10-27 18:43:34,130 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD ACCEPT
-P OUTPUT DROP
-A INPUT -i tun0 -j ACCEPT
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 1197 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A INPUT -s 192.168.1.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT
-A INPUT -p udp -m udp --sport 53 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 1197 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A OUTPUT -d 192.168.1.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT
-A OUTPUT -p udp -m udp --dport 53 -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT

2016-10-27 18:43:34,130 DEBG 'start-script' stdout output:
--------------------
[info] Starting OpenVPN...

2016-10-27 18:43:34,143 DEBG 'start-script' stdout output:
Thu Oct 27 18:43:34 2016 OpenVPN 2.3.11 x86_64-unknown-linux-gnu [sSL (OpenSSL)] [LZO] [EPOLL] [MH] [iPv6] built on May 12 2016
Thu Oct 27 18:43:34 2016 library versions: OpenSSL 1.0.2h 3 May 2016, LZO 2.09
Thu Oct 27 18:43:34 2016 WARNING: file 'credentials.conf' is group or others accessible


2016-10-27 18:43:34,143 DEBG 'start-script' stdout output:
Thu Oct 27 18:43:34 2016 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.


2016-10-27 18:43:34,199 DEBG 'start-script' stdout output:
Thu Oct 27 18:43:34 2016 UDPv4 link local: [undef]
Thu Oct 27 18:43:34 2016 UDPv4 link remote: [AF_INET]109.201.152.226:1197

2016-10-27 18:43:35,177 DEBG 'start-script' stdout output:
Thu Oct 27 18:43:35 2016 [237dce7889fc9a964f36f065f7e6cd4e] Peer Connection Initiated with [AF_INET]109.201.152.226:1197

2016-10-27 18:43:37,433 DEBG 'start-script' stdout output:
Thu Oct 27 18:43:37 2016 TUN/TAP device tun0 opened
Thu Oct 27 18:43:37 2016 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Thu Oct 27 18:43:37 2016 /usr/bin/ip link set dev tun0 up mtu 1500

2016-10-27 18:43:37,434 DEBG 'start-script' stdout output:
Thu Oct 27 18:43:37 2016 /usr/bin/ip addr add dev tun0 local 10.38.10.6 peer 10.38.10.5

2016-10-27 18:43:37,441 DEBG 'start-script' stdout output:
Thu Oct 27 18:43:37 2016 Initialization Sequence Completed

2016-10-27 18:43:37,493 DEBG 'deluge-script' stdout output:
[info] Deluge daemon not running, marking as first run

2016-10-27 18:43:39,111 DEBG 'deluge-script' stdout output:
[info] All checks complete, starting Deluge...

2016-10-27 18:43:39,369 INFO reaped unknown pid 653
2016-10-27 18:43:39,369 DEBG received SIGCLD indicating a child quit
2016-10-27 18:43:39,850 DEBG 'webui-script' stdout output:
[info] Starting Deluge webui...

2016-10-27 18:43:40,324 DEBG 'deluge-script' stdout output:
Setting random_port to False..
Configuration value successfully updated.

2016-10-27 18:43:40,874 DEBG 'deluge-script' stdout output:
Setting listen_ports to (29460, 29460)..
Configuration value successfully updated.

2016-10-27 18:43:40,927 DEBG 'deluge-script' stdout output:
[debug] VPN incoming port is 29460
[debug] Deluge incoming port is 29460
[debug] VPN IP is 10.X.X.X
[debug] Deluge IP is 10.X.X.X
[debug] Sleeping for 10 mins before rechecking listen interface and port (port checking is for PIA only)

user_47 · October 28, 2016

I just got my unRAID set up this weekend after wanting to tackle a project like this for a while -- everything was working fine, but I couldn't get this Docker to work...after some trial and error, I think i found a bug that I haven't seen mentioned anywhere else.

I couldn't get my VPN (PIA) to connect because my password had a "$" which was causing it to truncate at the $. I figured this out by looking at

/mnt/cache/appdata/binhex-delugevpn/openvpn/credentials.conf

where my username was correct but the pass was cut off at "$." Changed my password to not include any special characters, and works fine now.

Naldinho · October 28, 2016

I'm having a lost connection issue when removing torrents that are complete manually -- If I choose a multiple complete torrents and then remove torrent I lose connection to the docker.

Is there some setting that I should be changing to prevent this from happening?

JonathanM · October 28, 2016

I'm having a lost connection issue when removing torrents that are complete manually -- If I choose a multiple complete torrents and then remove torrent I lose connection to the docker.

Is there some setting that I should be changing to prevent this from happening?

I suspect it's a threading issue, I've seen similar behaviour when manipulating multiple items. Does the connection restore itself after waiting a bit?

Naldinho · October 28, 2016

I'm having a lost connection issue when removing torrents that are complete manually -- If I choose a multiple complete torrents and then remove torrent I lose connection to the docker.

Is there some setting that I should be changing to prevent this from happening?

I suspect it's a threading issue, I've seen similar behaviour when manipulating multiple items. Does the connection restore itself after waiting a bit?

There is an alert popup and then when I dismiss it Deluge is just the framework but otherwise blank. I've never waited to see if it populates but if I press reload after a small wait I get everything like normal.

I've also noticed that when a torrent finishes all the other torrents stop downloading for about the amount of time it would take to move a file from the downloading directory to the completed directory. The downloading / seeding then returns to normal.

Pducharme · October 28, 2016

Damn, it was working well. Then, I saw an "update" in the Docker page on Unraid. Updated. now, it doesn't work

2016-10-28 11:00:06,250 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 Socket Buffers: R=[212992->524288] S=[212992->212992]
Fri Oct 28 11:00:06 2016 OPTIONS IMPORT: --ifconfig/up options modified
Fri Oct 28 11:00:06 2016 OPTIONS IMPORT: route options modified
Fri Oct 28 11:00:06 2016 OPTIONS IMPORT: route-related options modified
Fri Oct 28 11:00:06 2016 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Fri Oct 28 11:00:06 2016 ROUTE_GATEWAY 172.17.0.1/255.255.0.0 IFACE=eth0 HWADDR=02:42:ac:11:00:03
Fri Oct 28 11:00:06 2016 TUN/TAP device tun0 opened
Fri Oct 28 11:00:06 2016 TUN/TAP TX queue length set to 100
Fri Oct 28 11:00:06 2016 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Fri Oct 28 11:00:06 2016 /usr/bin/ip link set dev tun0 up mtu 1500

2016-10-28 11:00:06,250 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 /usr/bin/ip addr add dev tun0 172.21.90.123/23 broadcast 172.21.91.255

2016-10-28 11:00:06,251 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 /usr/bin/ip route add 216.151.184.9/32 via 172.17.0.1

2016-10-28 11:00:06,251 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 /usr/bin/ip route add 0.0.0.0/1 via 172.21.90.1

2016-10-28 11:00:06,252 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 /usr/bin/ip route add 128.0.0.0/1 via 172.21.90.1

2016-10-28 11:00:06,252 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 Initialization Sequence Completed

binhex · October 28, 2016

Damn, it was working well. Then, I saw an "update" in the Docker page on Unraid. Updated. now, it doesn't work

2016-10-28 11:00:06,250 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 Socket Buffers: R=[212992->524288] S=[212992->212992]
Fri Oct 28 11:00:06 2016 OPTIONS IMPORT: --ifconfig/up options modified
Fri Oct 28 11:00:06 2016 OPTIONS IMPORT: route options modified
Fri Oct 28 11:00:06 2016 OPTIONS IMPORT: route-related options modified
Fri Oct 28 11:00:06 2016 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Fri Oct 28 11:00:06 2016 ROUTE_GATEWAY 172.17.0.1/255.255.0.0 IFACE=eth0 HWADDR=02:42:ac:11:00:03
Fri Oct 28 11:00:06 2016 TUN/TAP device tun0 opened
Fri Oct 28 11:00:06 2016 TUN/TAP TX queue length set to 100
Fri Oct 28 11:00:06 2016 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Fri Oct 28 11:00:06 2016 /usr/bin/ip link set dev tun0 up mtu 1500

2016-10-28 11:00:06,250 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 /usr/bin/ip addr add dev tun0 172.21.90.123/23 broadcast 172.21.91.255

2016-10-28 11:00:06,251 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 /usr/bin/ip route add 216.151.184.9/32 via 172.17.0.1

2016-10-28 11:00:06,251 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 /usr/bin/ip route add 0.0.0.0/1 via 172.21.90.1

2016-10-28 11:00:06,252 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 /usr/bin/ip route add 128.0.0.0/1 via 172.21.90.1

2016-10-28 11:00:06,252 DEBG 'start-script' stdout output:
Fri Oct 28 11:00:06 2016 Initialization Sequence Completed

Please attach full supervisord.log file, that snippet doesn't tell me much

Sent from my SM-G900F using Tapatalk

Pducharme · October 28, 2016

Here it is :

supervisord.txt

JonathanM · October 28, 2016

Here it is :

You probably should change your password.

Pducharme · October 28, 2016

damn it. I thought it was removed from every line!

Changed, thank you.

pyrater · October 28, 2016

Always here is the output from deluge.log


[iNFO    ] 12:15:15 configmanager:70 Setting config directory to: /config
[iNFO    ] 12:15:15 daemon:124 Deluge daemon 1.3.13
[iNFO    ] 12:15:15 configmanager:70 Setting config directory to: /config
[iNFO    ] 12:15:15 core:85 Starting libtorrent 1.0.9.0 session..
[WARNING ] 12:15:15 core:192 Failed to load lt state: [Errno 2] No such file or directory: '/config/session.state'
[iNFO    ] 12:15:15 rpcserver:367 Starting DelugeRPC server localhost:58846
[WARNING ] 12:15:15 preferencesmanager:303 Unable to read DHT state file: [Errno 2] No such file or directory: '/config/dht.state'
[iNFO    ] 12:15:18 torrentmanager:650 Successfully loaded state file: /config/state/torrents.state
[iNFO    ] 12:15:18 rpcserver:204 Deluge Client connection made from: 127.0.0.1:34210
[iNFO    ] 12:15:18 rpcserver:204 Deluge Client connection made from: 127.0.0.1:34212
[iNFO    ] 12:15:18 rpcserver:224 Deluge client disconnected: Connection to the other side was lost in a non-clean fashion: Connection lost.
[iNFO    ] 12:15:18 rpcserver:204 Deluge Client connection made from: 127.0.0.1:34304
[iNFO    ] 12:15:18 rpcserver:224 Deluge client disconnected: Connection to the other side was lost in a non-clean fashion: Connection lost.

pyrater · October 28, 2016

If i disable the vpn in the params it boots up fine. Which of course defeats the purpose of using this docker lol.

[Support] binhex - DelugeVPN

Recommended Posts

Link to comment

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Ryanoc3ros

Dad_Rage

binhex

Posted Images

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Link to comment

Join the conversation