Swampy

Members
  • Posts

    138
  • Joined

  • Last visited

Converted

  • Gender
    Male
  • Location
    Westen New York State

Swampy's Achievements

Apprentice

Apprentice (3/14)

1

Reputation

  1. SOLVED: I found in management access menu that Telnet & SSH were selected as "No" No more issue.
  2. For years I've used telnet (Putty) to gain access to my server. Starting some time ago something changed as I'm no longer able too. 1) I can ping to server with no issue. 2) I have access to server using Win10. 3) Can get to server with FileZilla. 4) used desktop and laptop with same results. tower-diagnostics-20230219-0911.zip
  3. No speaker connected. I will add when I get a replacement MB. The CPU is 10900K so according to Sireal63 it does have Graphics Processor on it. Based on the missing pins on CPU socket I have gotten a RMA from Newegg. TY for all of the suggestions guys. I would never of looked at the CPU socket and found the missing pins.
  4. I purchased the CPU knowing it has graphics on board from Newegg. Looking at the box there is no way of knowing... I looked at the pins on MB and it appears to have 5 missing pins. I see holes with no pins in it....
  5. Thanks for you help. I have tried all that has been suggested and still no life. I have a power light on board and the fan on cpu is running. Nothing fron the hdmi port for monitor and still no error code. I am running out of time for an RMA. Any experience on bad MB vs CPU?
  6. TY for your response. I tried what you suggested twice with no results. In the manual it points out there is a socket for case intrusion. Do you think I need to put a jumper on it?
  7. I just recently built a new server but it will not post. Only the fans turn. It does not show error codes so I cant diagnose the problem. Could it be the CPU or the Mother Board be the issue? CPU : I9 Unlocked MB : GIGABYTE W480 VISION W LGA 1200 Intel W480 SATA 6Gb/s ATX Thanks in advance
  8. I have moved to a new server and no longer need this server. The following is what it consists of. The sale price is for $350 with no HD's or Key. The freight cost I included will very and will need to have insurance. I will ship in the USA only.
  9. Thank You. I wanted verification before going any further.
  10. I built my new server with Ver. 6.2 some time ago and has been stable. Now I removed all data drives including parity drive out of it to replace with the data drives from old server (5.0). Now that all of the drives are installed and assigned as the old array was. How do I get the new server to accept the new array and parity as good and not wipe the data out? Do I navigate to the Tools tab at the top of the webGui and click on New Config ? Thanks
  11. I have not been able to update via the GUI moving from 6.2.1 to 6.2.3. See screen capture: What files do I need to copy/overwrite ? to make a clean update from the down load from Lime Tech ? Thanks.
  12. Thank you for taking the time to write this up. It was the solution to my problem. Best Regards
  13. I think if you search for SCSI pass through you will find instruction on how to do it. Regards
  14. Does any one have a suggestion to how the fix this? I can not conduct an auto start on the VM with this constantly changing between 7 & 8. Help is needed! See above post. Thanks
  15. Oh, Something I did different this time is with the past iterations I used the last 4 of the 8 cores in the GUI. This One I selected the first 4.........So does this mean I had zero cores selected previously so it would never start in VM for Win 10 Pro ? Thanks [update] Today I could not get the VM to load. Yesterday was the first sign of life but was short lived. What totally confusing me is Ubuntu has zero issue in launching....... If I compare the XML there pretty close to being the same. Ubuntu works directly off the template but Win 10 is fussy.