coppit Posted April 27, 2015 Share Posted April 27, 2015 (edited) Since nativedude created a "competing" container instead of contributing to mine, I've just deleted mine. Use his instead. Or use Discord. That's what I'm using now. I've put together a Murmur container. Murmur is the server component of the Mumble voice-over-ip program. https://registry.hub.docker.com/u/coppit/mumble-server/ In the coming days I'll clean it up and put it into a template repository to make it easier for unRAID folks to use it. Edited March 30, 2017 by coppit Quote Link to comment
Spydawg Posted April 27, 2015 Share Posted April 27, 2015 Great! Been looking for it.. Thanks Quote Link to comment
Dase Posted April 30, 2015 Share Posted April 30, 2015 Thanks for creating this container! I have been looking forward to running a Mumble server on my unRAID box. Quote Link to comment
coppit Posted May 2, 2015 Author Share Posted May 2, 2015 I put it into my template repository. Add this URL to the templates section of the Docker tab: https://github.com/coppit/docker-templates Then create a new container, selecting mumble-server Quote Link to comment
hodkenneth Posted May 21, 2015 Share Posted May 21, 2015 Thanks for your work. I had a few questions. for some reason I'm getting "Connection Refused". Which makes me want to assume the ports are off. Even when connecting to a server on the local network. Any advice? 10.0.0.*** 64738 is what its saying. Do I have to change anything in the config file? Thanks, Kenny. Quote Link to comment
Nativedude Posted May 22, 2015 Share Posted May 22, 2015 Oh good it's not just me then Same issue, can't get Mumble to connect Quote Link to comment
coppit Posted June 1, 2015 Author Share Posted June 1, 2015 I changed the port to 61738 and it started working again. Quote Link to comment
dirtysanchez Posted June 1, 2015 Share Posted June 1, 2015 When I first set up this container it was unable to connect as well. I went into the container settings and clicked save (without changing anything) which effectively rebuilds the container, and I was then able to connect. It has worked flawlessly since. Quote Link to comment
krone6 Posted August 25, 2015 Share Posted August 25, 2015 The image is not found when I try to add murmur (mumble server). Any idea how to fix this? Quote Link to comment
coppit Posted August 25, 2015 Author Share Posted August 25, 2015 How exactly are you trying to use the image? By clicking "add" under community applications? And you're using mine and not nativedude's? Quote Link to comment
krone6 Posted August 25, 2015 Share Posted August 25, 2015 How exactly are you trying to use the image? By clicking "add" under community applications? And you're using mine and not nativedude's? Both the community applications and your repository along with nativedude's repository. It even does it on a docker I had installed and tried to reinstall it the same way with the same config. I restarted docker and then restarted the server with no luck. This started about a day or two ago if I had to guess as I was able to install dockers just fine up until now. Quote Link to comment
Squid Posted August 25, 2015 Share Posted August 25, 2015 How exactly are you trying to use the image? By clicking "add" under community applications? And you're using mine and not nativedude's? Both the community applications and your repository along with nativedude's repository. It even does it on a docker I had installed and tried to reinstall it the same way with the same config. I restarted docker and then restarted the server with no luck. This started about a day or two ago if I had to guess as I was able to install dockers just fine up until now. Try maybe setting static DNS addresses under network settings (8.8.8.8 and 8.8.4.4 will work) and reboot to ensure they take effect and try it again. If your ISP is anything like mine, their DNS servers suck. Quote Link to comment
krone6 Posted August 25, 2015 Share Posted August 25, 2015 How exactly are you trying to use the image? By clicking "add" under community applications? And you're using mine and not nativedude's? Both the community applications and your repository along with nativedude's repository. It even does it on a docker I had installed and tried to reinstall it the same way with the same config. I restarted docker and then restarted the server with no luck. This started about a day or two ago if I had to guess as I was able to install dockers just fine up until now. Try maybe setting static DNS addresses under network settings (8.8.8.8 and 8.8.4.4 will work) and reboot to ensure they take effect and try it again. Already use those static DNS's. Anything else I could try? Quote Link to comment
Squid Posted August 25, 2015 Share Posted August 25, 2015 How exactly are you trying to use the image? By clicking "add" under community applications? And you're using mine and not nativedude's? Both the community applications and your repository along with nativedude's repository. It even does it on a docker I had installed and tried to reinstall it the same way with the same config. I restarted docker and then restarted the server with no luck. This started about a day or two ago if I had to guess as I was able to install dockers just fine up until now. Try maybe setting static DNS addresses under network settings (8.8.8.8 and 8.8.4.4 will work) and reboot to ensure they take effect and try it again. Already use those static DNS's. Anything else I could try? The only other thing I can think of is another guy here had a similar problem with plugins, and the solution was to ultimately delete his /boot/config/network.cfg / reboot / reset the settings Quote Link to comment
Squid Posted August 25, 2015 Share Posted August 25, 2015 Or your docker.img file is full and/or corrupted Quote Link to comment
krone6 Posted August 25, 2015 Share Posted August 25, 2015 Or your docker.img file is full and/or corrupted None of those worked. I first made a new image and tried the above methods. I then deleted my network.cfg file and did a reboot and resetup a static ip and dns to 8.8.8.8, 8.8.4.4., 4.2.2.4 and still didn't have any luck. Here is the code I am seeing: root@localhost:# /usr/bin/docker run -d --name="MumbleServer" --net="bridge" -e TZ="America/New_York" -p 64738:64738/tcp -p 64738:64738/udp -v "/mnt/cache/Docker/":"/data":rw coppit/mumble-server Unable to find image 'coppit/mumble-server:latest' locally Pulling repository coppit/mumble-server Get https://index.docker.io/v1/repositories/coppit/mumble-server/images: x509: failed to load system roots and no roots provided By the way, is it fine if I issue a reboot from a telnet session while the array's running? I was under the assumption it stops everything gracefully before rebooting similar to windows shutting down however I am starting to think it's more of a hard reboot at this point. Quote Link to comment
coppit Posted August 25, 2015 Author Share Posted August 25, 2015 Or your docker.img file is full and/or corrupted Yeah, that's really annoying. I've been using this to clean up images: https://github.com/auser/yadr/blob/master/bin/docker-cleanup.sh Quote Link to comment
exist2resist Posted September 2, 2015 Share Posted September 2, 2015 How do I set the SU password... does it work using docker exec? Quote Link to comment
exist2resist Posted September 3, 2015 Share Posted September 3, 2015 I need to know where in the docker container the murmur.x86 file is located. I can change the su password via docker exec. docker exec MumbleServer ./murmur.x86 /data/mumble-server.ini -supw MyPassword I need the exact location of the ./murmur.x86 Quote Link to comment
exist2resist Posted September 3, 2015 Share Posted September 3, 2015 Figured it out. This is a debian based installation so murmur runs as a service, as per this site and instructions: http://wiki.mumble.info/wiki/Running_Murmur#Setting_the_SuperUser_Password You can change your SU password for Murmur from bash on Unraid like so: docker exec MumbleServer sudo -i murmurd -ini /data/mumble-server.ini -supw YourPassword Cheers Quote Link to comment
coppit Posted September 4, 2015 Author Share Posted September 4, 2015 Pardon the ignorance, but what's the benefit of running it that way versus "docker run"? The container already knows how to start the server, and you can always to "docker exec -it <container name> bash" later to attach to a running container. Quote Link to comment
exist2resist Posted September 6, 2015 Share Posted September 6, 2015 You can run it from a script if you want. In the end setting the su password doesn't matter if you do it manually. Quote Link to comment
Conson Droppa Posted October 6, 2015 Share Posted October 6, 2015 Also I am sorry for the ignorance but there is /data in the container volume field. Do I need to populate the Host path with a location. Any folder? Cache? Quote Link to comment
dirtysanchez Posted October 6, 2015 Share Posted October 6, 2015 Also I am sorry for the ignorance but there is /data in the container volume field. Do I need to populate the Host path with a location. Any folder? Cache? It needs to be mapped to the location the Mumble container will store it's data. Same as any other docker (but usually called /config in other dockers). For example /mnt/cache/appdata/mumble. Quote Link to comment
Conson Droppa Posted October 7, 2015 Share Posted October 7, 2015 Did exactly that. Thanks!!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.