linuxserver.io Posted November 1, 2016 Share Posted November 1, 2016 (edited) Application Name: Cardigann Application Site: https://github.com/cardigann/cardigann/ Docker: https://hub.docker.com/r/linuxserver/cardigann/ Github: https://github.com/linuxserver/docker-cardigann Please post any questions/issues relating to this docker you have in this thread. If you are not using Unraid (and you should be!) then please do not post here, instead head to linuxserver.io to see how to get support Edited September 14, 2018 by linuxserver.io Quote Link to comment
adyy48 Posted November 17, 2016 Share Posted November 17, 2016 Hello, I want to be able to use one of the trackers for couchpotato, i have successfully searched and find results on cardigann but i can't get it to work in couchpotato. How am i suppose to conffigure it in couchpotato - > settings -> sercher ? using TorrentPotato? Thank you Quote Link to comment
CHBMB Posted November 17, 2016 Share Posted November 17, 2016 Hello, I want to be able to use one of the trackers for couchpotato, i have successfully searched and find results on cardigann but i can't get it to work in couchpotato. How am i suppose to conffigure it in couchpotato - > settings -> sercher ? using TorrentPotato? Thank you No idea. Better off asking in couchpotato forum or torrentpotato if you get no replies from anyone else here. Quote Link to comment
weirdcrap Posted November 18, 2016 Share Posted November 18, 2016 Hello, I want to be able to use one of the trackers for couchpotato, i have successfully searched and find results on cardigann but i can't get it to work in couchpotato. How am i suppose to conffigure it in couchpotato - > settings -> sercher ? using TorrentPotato? Thank you No idea. Better off asking in couchpotato forum or torrentpotato if you get no replies from anyone else here. Under the TorrentPotato section you put in the TorrentPotato link for that tracker from Cardigann into the host field. You then put the Cardigann API key into the Pass key field. Leave the username field blank (I haven't seen anything require this field). Make sure the box at the begginning of the field next to host is checked as this shows that you want to enable that searcher. That should be all you need. Quote Link to comment
Dimtar Posted November 29, 2016 Share Posted November 29, 2016 Just wanted to quickly say this docker is awesome, the program is awesome and works well. Thanks LinuxServer team! Quote Link to comment
CHBMB Posted November 29, 2016 Share Posted November 29, 2016 Dimtar, nice of you to say so mate. I reinstalled telegram last night so was planning on sending you a PM. Is the Unraid room still going? Sent from my LG-H815 using Tapatalk Quote Link to comment
Alexandro Posted December 1, 2016 Share Posted December 1, 2016 First I would kindly like to thank you for this docker. I would also like to know how to add the trackers mentioned in the github as they are n.a. in the docker web interface. I am particularly interested in https://www.worldofp2p.net/index.php tracker which should be supported but cannot find it as an option. Thank you in advance. Quote Link to comment
CHBMB Posted December 1, 2016 Share Posted December 1, 2016 First I would kindly like to thank you for this docker. I would also like to know how to add the trackers mentioned in the github as they are n.a. in the docker web interface. I am particularly interested in https://www.worldofp2p.net/index.php tracker which should be supported but cannot find it as an option. Thank you in advance. Alexandro, I'm afraid I don't know, we don't necessarily use the apps, we just make the docker. Probably best to have a look here and see if that helps at all. https://github.com/cardigann/cardigann/ Quote Link to comment
Dimtar Posted December 2, 2016 Share Posted December 2, 2016 @Alexandro I would suggest creating an issue on the github page that CHBMB linked. I just pulled down the latest version to my windows box and it seems to be missing that indexer as well as the docker so maybe its an issue with Cardigann its self. Quote Link to comment
Alexandro Posted December 2, 2016 Share Posted December 2, 2016 Thank you both CHBMB and Dimtar. As I have never done this before I will register and try to report the issue. Best regards Quote Link to comment
Alexandro Posted December 3, 2016 Share Posted December 3, 2016 I've reported the issue on the github, but a collaborator has just reported it is working fine for him. https://github.com/cardigann/cardigann/issues/259#issuecomment-264633804 Quote Link to comment
Dimtar Posted December 3, 2016 Share Posted December 3, 2016 I've reported the issue on the github, but a contributor has just reported it is working fine for him. I'll add to it. Quote Link to comment
tooviral Posted December 4, 2016 Share Posted December 4, 2016 Have installed this and I am unable to get any trackers working. Seen this in the log [cont-init.d] 10-adduser: exited 0. [cont-init.d] 30-config: executing... [cont-init.d] 30-config: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. time="2016-12-03T12:18:18-05:00" level=info msg="Cardigann v1.9.4" time="2016-12-03T12:18:18-05:00" level=info msg="Reading config from /config/config.json" time="2016-12-03T12:18:18-05:00" level=info msg="Found 4 indexers enabled in configuration" time="2016-12-03T12:18:18-05:00" level=info msg="Listening on 0.0.0.0:5060" ? Testing indexer demonoid at http://www.dnoid.me/ Testing required config is available [32mSUCCESS ?[0m [37min 437.722µs[0m Testing login with valid credentials [31mFAILURE ?[0m [37min 20.002423302s[0m ? Indexer demonoid [31mFAILED[0m with [31mNo working urls found[0m time="2016-12-03T12:21:01-05:00" level=warning msg="URL check failed" error="Get http://www.dnoid.me/: dial tcp: lookup www.dnoid.me on 192.168.1.1:53: read udp 192.168.1.152:43470->192.168.1.1:53: i/o timeout" site=demonoid time="2016-12-03T12:21:01-05:00" level=error msg="Test failed" error="No working urls found" time="2016-12-03T12:21:16-05:00" level=warning msg="URL check failed" error="Get https://eztv.ag/: dial tcp: lookup eztv.ag on 192.168.1.1:53: read udp 192.168.1.152:36896->192.168.1.1:53: i/o timeout" site=eztv time="2016-12-03T12:23:23-05:00" level=warning msg="URL check failed" error="Get https://thepiratebay.org/: dial tcp: lookup thepiratebay.org on 192.168.1.1:53: read udp 192.168.1.152:33165->192.168.1.1:53: i/o timeout" site=thepiratebay time="2016-12-03T12:23:43-05:00" level=warning msg="URL check failed" error="Get https://thepiratesbay.pw/: dial tcp: lookup thepiratesbay.pw on 192.168.1.1:53: read udp 192.168.1.152:60513->192.168.1.1:53: i/o timeout" site=thepiratebay time="2016-12-03T12:23:43-05:00" level=warning msg="URL check failed" error="Get https://thepiratesbay.pw/: dial tcp: lookup thepiratesbay.pw on 192.168.1.1:53: read udp 192.168.1.152:60513->192.168.1.1:53: i/o timeout" site=thepiratebay time="2016-12-03T12:24:03-05:00" level=warning msg="URL check failed" error="Get https://tproxy.pro/: dial tcp: lookup tproxy.pro on 192.168.1.1:53: read udp 192.168.1.152:53668->192.168.1.1:53: i/o timeout" site=thepiratebay Quote Link to comment
brbones Posted December 20, 2016 Share Posted December 20, 2016 Greetings, is there a setup and config guide for this docker? I am currently using CP and Deluge (may add sonar soon). also jackett, cardigan, or both? Cheers! Quote Link to comment
brbones Posted December 23, 2016 Share Posted December 23, 2016 Is there any public sites available? Quote Link to comment
Dimtar Posted December 23, 2016 Share Posted December 23, 2016 Is there any public sites available? Jackett and Cardigann are effectively the same but Cardigann is written in the GO language so it may be better long term. Either way, installing the Docker takes a few minutes. Why don't you install the docker and take a look around? Quote Link to comment
heffe2001 Posted January 2, 2017 Share Posted January 2, 2017 Greetings, is there a setup and config guide for this docker? I am currently using CP and Deluge (may add sonar soon). also jackett, cardigan, or both? Cheers! Far as setup guide, the GUI is pretty easy to use (not as flashy as Jackett though). I transferred all my stuff over from Jackett, and it's been working fine for me so far. MUCH more stable than Jackett on my system as well (Jackett required me to restart it every few days, it would stop responding to polls and the UI). Also, resources-wise it feels lighter than Jackett. Quote Link to comment
kkuhle Posted January 23, 2017 Share Posted January 23, 2017 Just set this app and so far it's pretty nice. I have been on the official github and noticed that there have been a lot of updates in the current version, some of which I would like to use. I'm pretty new to docker, so I haven't seen how often these get updated. Anyway, any chance we will be seeing a new docker with a new version of cardigann on here soon? Quote Link to comment
xhaloz Posted November 30, 2017 Share Posted November 30, 2017 Is there anyway to run this with a HTTPS or SOCKS5 proxy? Quote Link to comment
Kewjoe Posted January 14, 2019 Share Posted January 14, 2019 (edited) On 11/30/2017 at 1:40 PM, xhaloz said: Is there anyway to run this with a HTTPS or SOCKS5 proxy? Not a lot of activity in this thread. Anyone figure out how to get cardigann working with privoxy? On github it says: Quote Using with a Proxy Currently either a SOCKS5 proxy like Privoxy or Tor can be used: SOCKS_PROXY=localhost:1080 cardigann server Or, an http proxy works too: HTTP_PROXY=localhost:8080 cardigann server If you are running as a service, you will need to manually edit the service files to set the environment. But I'm not clear where that goes? in the config.json? is it some sort of startup command? Edit: I created a new variable, where key = "HTTP_PROXY" and the value = "<my server ip>:8118" and it seems to have done the trick. Not that I can really test it in this case. I just have to assume it is working Edited January 14, 2019 by Kewjoe Quote Link to comment
lovingHDTV Posted December 2, 2020 Share Posted December 2, 2020 (edited) Anyone still running this docker? When I try to go to the web address [IP]:5060 it doesn't connect to anything. The log appears as if it is running: time="2020-12-01T21:32:30-05:00" level=info msg="Cardigann dev" time="2020-12-01T21:32:30-05:00" level=info msg="Reading config from /.config/cardigann/config.json" time="2020-12-01T21:32:30-05:00" level=info msg="Found 0 indexers enabled in configuration" time="2020-12-01T21:32:30-05:00" level=info msg="Listening on 0.0.0.0:5060" I can get a console and run a query, though it errors out because I don't have anything configured. suggestions? Update: port 5060 is blocked by current browsers so I changed the host port from 5060 to 5070 in the settings and it works fine now. Edited December 2, 2020 by lovingHDTV Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.