smdion Posted July 20, 2015 Share Posted July 20, 2015 After much pestering through PMs and some forum posts I have a post over at LinuxServer.io on how to set all this up. https://www.linuxserver.io/index.php/2015/07/20/how-to-active-directory-on-unraid-6/ Feel free to hit me up on #linuxserver.io on Freenode. Quote Link to comment
ninthwalker Posted July 22, 2015 Share Posted July 22, 2015 Thanks for the write up, I recently brought up a DC at home and wanted to integrate unraid into it. But I stopped because of quirky permissions, so I will have to give this a try again soon. - NinthWalker Quote Link to comment
Schar Posted November 19, 2015 Share Posted November 19, 2015 [v6.1.3] Just another tip: I just rebooted my array and after booting (a second time as it didn't come up clean the first time) it was unjoined from my DC. I suspect that this was due to my DC being offline at the time. Question - is there a dependency on the DC being up on boot? If so - worth noting this somewhere. Once I rejoined from the SMB settings page, windows was doing its old prompt for access (NTLM prompt) with nothing working. Doing this from a command window: net use \\tower\ipc$ kicked everything into life. No more prompting and everything working. Didn't even need to type in a password. Once I was in I could even net use \\tower\ipc$ /d and everything still works. This is consistent with previous AD joining experiences; I've always needed to do this once to kick the authN/authZ into life (only one client PC, not all) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.