JorgeB

Depends on how they are assinged, if they are in the same pool it can also be a mirror. What do you mean affect? If you mean if it can be added later, it can. No, You cannot have parity without array data devices. Yes, but not automatically, you could use a script for example, there are also some containers that work for that, look in Apps.

Those are set in /boot/config/disk.cfg, check if they are correct there, they are set disk by disk, for disk1 for example it's these lines: diskWarning.1="50" diskCritical.1="" Disk2 would be: diskWarning.2="50" diskCritical.2="" etc

See if it works correctly now, re-apply for all other disks and check they were added to the smart-one.cfg, you can open the file with any text editor

Run a correcting scrub in the pool, and make sure all errors are corrected.

/boot/config

Just don't click preclear, it won't start on its own.

Sorry, missed them below the screenshots. First thing update to latest stable, but I don't see the smart-one.cfg file, and it should exist if there are custom tempos for array devices, see if it exists locally, if not, after updating, try changing temps for one of the array disks and see if it still doesn't get created.

Apr 26 07:32:59 unraid kernel: nvme nvme0: controller is down; will reset: CSTS=0x3, PCI_STATUS=0x10 Apr 26 07:33:10 unraid kernel: nvme nvme0: Device not ready; aborting reset, CSTS=0x3 Apr 26 07:33:10 unraid kernel: nvme nvme0: Removing after probe failure status: -19 NVMe device dropped offline, try power cycling the server, not just rebooting, to see if it comes back.

Yes. It's perfectly fine, if it matches your use case, both pool can be set as primary storage for any shares. Yes. For that you'd need to assign at least one of the devices to the array, instead of the flash drive.

Pool went read only, with btrfs suggest you backup the data and re-format.

You can do whatever is easier.

Please post the diagnostics.

Yes. You can set a pool as the primary storage for shares.

If the CLI shutdown didn't work you will need to force a reboot.

What do you mean by WebPanel, is this a container?