zoe

I installed my first SS-500 cage in my Antec 1200, today, using an 8" Deep Throat C-Clamp with PVC Jaw Pads added to minimize damage. The PVC Jaw Pads were an experiment that worked quite well. My process was to use pliers to bend down, the c-clamp to bend further, and then a flathead screwdriver to leverage the tabs to the outside of the case. I was more concerned about moving the tabs out of the way than how flat I could get them. The only marring was from the pliers and screwdriver. I found the clamp and pads online at Harbor Freight Tools and was lucky enough to pick them up in the store on my way to some fireworks, last night. I've never heard of the place and there isn't one in my neck of the woods. http://www.harborfreight.com/8-inch-deep-throat-c-clamp-45917.html http://www.harborfreight.com/9-pairs-c-clamp-jaw-pads-91952.html (Many thanks to all the folks who did this before me and posted about it. Made it very easy to accomplish successfully.)