OopsAllBerrys

Just wanted to chime in and say I am having the exact same issues as samtrois with MusicBrainz

Just updated my system, Plex works just find. I don't have an OpenVPN plugin. Whoops. This is what happens when I post from memory. I use your Emby plugin; not Plex, and yup, OpenVPN isn't yours.

Do PhAzE's plugins still work fine in 6.3? Specifically I am using the Plex and OpenVPN plugins. Thanks.

I just switched to the stable docker since my Phaze plugin stopped working. Unraid installed 3.0.7300 and on the dashboard homepage it said a newer release of Emby was available. I was able to upgrade Emby by running "docker exec EmbyServer update" from the command. I don't know why it didn't pull down the latest release at time of install or why unraid didn't say an update was available.

I just upgraded my emby server from within the plugin settings page to version 3.0.8000 and now the server will not start. It goes through all the motions like it is starting but the plugin settings page refreshes and the status is STOPPED. The Activity log says starts okay but emby isn't running. 2016-10-13 08:28:52 [iNFO] *** Button Start Initiated *** 2016-10-13 08:28:52 [iNFO] Syncing application and plugin config files 2016-10-13 08:28:52 [iNFO] Updating plugin config file 2016-10-13 08:28:52 [iNFO] Starting Emby Server... 2016-10-13 08:28:52 [iNFO] Updating dependencies 2016-10-13 08:28:52 [iNFO] Dependency install file has correct MD5 2016-10-13 08:28:52 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory 2016-10-13 08:28:53 [iNFO] Dependencies updated successfully 2016-10-13 08:28:53 [iNFO] Updating Mono 2016-10-13 08:28:53 [iNFO] Mono install file has correct MD5 2016-10-13 08:28:53 [iNFO] Mono updated successfully 2016-10-13 08:28:53 [iNFO] Updating export file 2016-10-13 08:28:53 [iNFO] Updating shorcut file 2016-10-13 08:28:54 [iNFO] Updating application directories 2016-10-13 08:28:54 [iNFO] Updating application config file 2016-10-13 08:28:55 [iNFO] Start OK!

I have ran the upgrade to 6.0.1 from within OE and it updated just fine. All my settings and libraries were unaffected.

OopsAllBerrys, What kind of hardware are you using? On my machines I have both refresh rate match and HD Audio passthrough working. I have also not experienced a loss of settings upon reboot. I am running a Radeon HD 6450. If I turn match refresh rate off, HD audio passthrough works at 60Hz on both the LT template and the generic VM. It seems like this is a driver issue from AMD after some Googling. Looks like I need to find a cheap NVIDIA card that will support HD audio passthrough at 24 Hz.

With the LT template, OpenELEC doesn't like changing the refresh rate to match the video and DTS-HD and TrueHD work. I've also run into the problem where I will reboot the VM and all the settings for Kodi are reset (skin, weather addon, etc.). With a generic OpenELEC VM, OpenELEC changes the refresh rate fine to match the video; but DTS-HD and TrueHD do not work.

Thanks for the write up. I got it up and running but having one issue. I cannot get passthrough DTS HD or TrueHD to output any sound. It works fine with the built-in Unraid template but not the generic img. I'm not sure what tweaks if any were made for sound on the Unraid version. I'm using a AMD 6450.

I would recommend using PlopKexec instead of the standard Plop; it boots up much faster, 20 seconds vs 5 minutes for Plop. https://www.plop.at/en/plopkexec.html

Nice find!! Did you just use the default iso? I don't see a GUI builder like for PLOP. I used the default iso. I spoke too soon; I see the following errors: Jun 15 22:53:13 DeathStar kernel: usb 1-2.1: reset high-speed USB device number 5 using xhci_hcd Jun 15 22:53:28 DeathStar kernel: usb 1-2.1: device descriptor read/64, error -110 I read that the -110 error means that the USB device is trying to pull too much power from the USB bus, something very strange is going on and I am definitely thinking we need to point fingers at the new kernel.

Trying something out. I unattached the Unraid USB from the VM and removed the USB controller; I added in a XHCI USB controller instead of the EHCI+UHCI USB controller and re-attached my Unraid USB to the VM. Plop does not support booting from XHCI devices so I used PlopKexec (same author as Plop) and was able to boot off the USB. It actually boots A LOT faster than Plop, like ~30 seconds vs the 5 minutes of Plop. So far I have not seen any of these USB reset errors. I'll report back tomorrow with more results.

Same problems on my ASRock E3C224-4L, no errors before the RC4 release. I am running ESXi v5.5 and I have the errors in my vmkernel.log.

I am also using plop and just attach the USB device to Unraid; not passing the whole controller. The "error" usually comes up once an hour. So far I haven't experienced any problems.

What version of esxi are you running? I'm seeing the same thing on 6 Using ESXi 5.5. I saw the same behavior on all the RCs so far. Beta 15 and before was fine.