slarco

Members
  • Posts

    176
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

slarco's Achievements

Apprentice

Apprentice (3/14)

0

Reputation

  1. I just did what you sugested and worked like a charm. Thank you so much for your help man. Now i can get the info back from each drive and put it back in the 1 drive that i kept on the array. Thx a lot
  2. Thanks for the answer. I´ll give it a try once i get back from work!
  3. So i messed up reading over the instructiones (https://lime-technology.com/wiki/index.php/Shrink_array) I misunderstood the instrucions posted for the "Remove Drives Then Rebuild Parity" Method and i didn't manually move the data from the drives that i was going to remove from the Array This method does not keep the drive's data within the array. If the drive to be removed has data you want to stay in the array, you must move it yourself to the other data drives. Parity will be built based entirely and only on the remaining drives and their contents. Now is still running a parity sync / Data Rebuild. I still have the drives haven't touch anything yet after the 1st reboot. Is there anything that i can do to reassign the drives that i just took off , get them back on the array, move the data from them to the one drive that im keeping on the array and take them off again? I was reading the instruction so carefully but i guess i misinterpreted because English is not my fist lenguage. So sad, I'm looking to loose over 10 years of pictures. Thanks in advance guys.. I'm running 6.3.3 btw
  4. Yeah. They are both under the same network. Attached to the same router. I will get a monitor and a keyboard to check if it's all booting ok. I'll get back when i have some results and syslogs. Thx
  5. Hi, I'm back here because I have a problem with my Unraid. I got my server up and running a long time ago. I have all macs and everything wired using a router. The server with static IP 192.168.1.10. I lend over the server to a friend and got it back after a year and a half In that time i change my mac and now i guess i lost the config to make it work with the server and i can't access the web guy or telnet. I cheated the usb flash, still have the same static IP. I'm not very good at this, took me a lot of time and post to make it run the first time. Does anyone have any idea where can i start ? I have around 12 Tb info on the server that i would like to re-organize and clean up after i review it. ALso, used to have the plugging to start once turned on but i think that is disabled now, i can't really remember after almost 2 years. Thanks a lot
  6. Ok i checked all the cables unplug them and re plug all again. Did all as indicated, got the blue dot, assigned again, got the orange dot and now the system is rebuilding on the same disk. Did I miss something? Should be done in 5 hours, so i'll be back to report later. Thx!
  7. So i got this red ball on a disk right after the power went off and i got to restart the server. Not sure what to do from here because i got the server up and running long time ago and i don't have much experience on this. Any advice would be appreciated SS and syslog attached, thanks in advance! syslog-missing5.txt
  8. So. i want to downgrade to the lates stable version because i been having some issues with missing disk when i reboot. Some times 1, sometimes 2 disk. I reboot the server and everything is back to normal, but is kind of annoying. ALso I don't have acces to the shares from my mac SO how can i downgrade?
  9. Hi, i just had the same problem that this guy and i was able to solve it just by re asigning the disk on the devices page of the web application. My question is; Why did i get 2 missing disk? I shut the server off a few days ago and when i came back i got the missing disk. Any idea? Do i need to run a parity check now? thx in advance
  10. zip it, (they zip really well) or, use ext host as you described. For pre-clear results I really do not need to see the entire syslog. You can attach only the pre-clear reports as found in /boot/preclear_reports Joe L. Ok, got the report on both drives. thx in advance both look fine. Thx Joe
  11. zip it, (they zip really well) or, use ext host as you described. For pre-clear results I really do not need to see the entire syslog. You can attach only the pre-clear reports as found in /boot/preclear_reports Joe L. Ok, got the report on both drives. thx in advance preclear_rpt__WD-WCAWZ1679024_2012-03-29.txt preclear_rpt__WD-WCAWZ1714217_2012-03-29.txt
  12. What if my syslog weight more than 192k? Use a external host? Just paste as quote?
  13. I can boot onto UnRAid with the mobo on AHCI mode and the card on the PCIEX4 or PCIEX16 as long as i dont have any drive attached to the SATA card. I have 8 drives attached to the mobo without a problem. As soon as i attach 1 HDD to the card the system hangs. I get the garbled boot option, the blank bios set up and the balck screen, blinking cursor. I have the latest bios on my mobo and downgrade to .15N on the sata card. so? what now? im 100% lost.
  14. Im using WD20EARS. I have the .15n and the cards works only when doesn't have a drive attached to it (AHCI mode) otherwise just hang in a black screen