needo Posted August 14, 2014 Author Share Posted August 14, 2014 08/13/2014 (plex) Upgrade to latest version. Quote Link to comment
Dimtar Posted August 14, 2014 Share Posted August 14, 2014 08/13/2014 (plex) Upgrade to latest version. Whoop whoop, thanks mate! Quote Link to comment
Spydawg Posted August 14, 2014 Share Posted August 14, 2014 this normal for NZBDrone? In system health, disk space. [img]Location Free Space Total Space / (/) 289.2 GB 298.1 GB /.dockerinit (/.dockerinit) 0 B 298.1 GB /etc/hostname (/etc/hostname) 0 B 298.1 GB /etc/hosts (/etc/hosts) 0 B 298.1 GB /tv (/tv) 289.2 GB 298.1 GB [/img] I mean the 0 b free space?? Quote Link to comment
needo Posted August 14, 2014 Author Share Posted August 14, 2014 this normal for NZBDrone? In system health, disk space. I mean the 0 b free space?? Yes, it looks the same on mine. Quote Link to comment
Spydawg Posted August 14, 2014 Share Posted August 14, 2014 Great thanks! One more thing how can I install the develop version of NZBDrone? Quote Link to comment
smdion Posted August 14, 2014 Share Posted August 14, 2014 Great thanks! One more thing how can I install the develop version of NZBDrone? Check out the Readme in needo's docker. - https://registry.hub.docker.com/u/needo/nzbget/ Quote Link to comment
Spydawg Posted August 14, 2014 Share Posted August 14, 2014 Great thanks! One more thing how can I install the develop version of NZBDrone? Check out the Readme in needo's docker. - https://registry.hub.docker.com/u/needo/nzbget/ That's for NZBget not NZBDrone. Will that work for NZBdrone too? Quote Link to comment
Spydawg Posted August 16, 2014 Share Posted August 16, 2014 Great thanks! One more thing how can I install the develop version of NZBDrone? Check out the Readme in needo's docker. - https://registry.hub.docker.com/u/needo/nzbget/ That's for NZBget not NZBDrone. Will that work for NZBdrone too? OK I found the Updating option in settings, changed the branch to Develop, restarted NZBDrone, it sees the updates and I tried to install them. I get an error saying my install is read only. Any way I can change it to work? Thanks Quote Link to comment
Niccarter Posted August 17, 2014 Share Posted August 17, 2014 Hi Installed OK, but I can't get any downloads to work. Torrents appear to start downloading, then fail to error state. From the details tab the Status is: "Permission denied: /etc/service/deluged/downloads" No file is created in the designated downloads directory (which is is "/mnt/user/downloads", not "/etc/service/deluged/downloads"). The permissions on "/mnt/user/downloads" are: drwxrwxrwx 1 nobody users 0 Aug 17 12:35 /mnt/user/downloads/ I've tried changing the downloads directory, changing permissions, reinstalling Deluge, etc, to no avail... Please help Nic ps ... if I run docker logs Deluge, I get: *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... No SSH host key available. Generating one... Creating SSH2 RSA key; this may take some time ... Creating SSH2 DSA key; this may take some time ... Creating SSH2 ECDSA key; this may take some time ... Creating SSH2 ED25519 key; this may take some time ... invoke-rc.d: policy-rc.d denied execution of restart. *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 93 [ERROR ] 12:35:42 json_api:229 Error calling method `web.get_torrent_status` [ERROR ] 12:35:42 json_api:230 'NoneType' object has no attribute 'call' Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/deluge/ui/web/json_api.py", line 221, in _handle_request result = self._exec_local(method, params, request) File "/usr/lib/python2.7/dist-packages/deluge/ui/web/json_api.py", line 188, in _exec_local return meth(*params) File "/usr/lib/python2.7/dist-packages/deluge/ui/web/json_api.py", line 619, in get_torrent_status return component.get("SessionProxy").get_torrent_status(torrent_id, keys) File "/usr/lib/python2.7/dist-packages/deluge/ui/sessionproxy.py", line 154, in get_torrent_status d = client.core.get_torrent_status(torrent_id, keys, True) File "/usr/lib/python2.7/dist-packages/deluge/ui/client.py", line 504, in __call__ return self.daemon.call(self.base, *args, **kwargs) AttributeError: 'NoneType' object has no attribute 'call' *** Shutting down runit daemon (PID 93)... *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 8 Unhandled Error Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/deluge/main.py", line 230, in start_daemon Daemon(options, args) File "/usr/lib/python2.7/dist-packages/deluge/core/daemon.py", line 171, in __init__ reactor.run() File "/usr/lib/python2.7/dist-packages/twisted/internet/base.py", line 1192, in run self.mainLoop() File "/usr/lib/python2.7/dist-packages/twisted/internet/base.py", line 1201, in mainLoop self.runUntilCurrent() --- <exception caught here> --- File "/usr/lib/python2.7/dist-packages/twisted/internet/base.py", line 824, in runUntilCurrent call.func(*call.args, **call.kw) File "/usr/lib/python2.7/dist-packages/deluge/core/torrentmanager.py", line 959, in on_alert_tracker_reply log.debug("on_alert_tracker_reply: %s", alert.message().decode("utf8")) File "/usr/lib/python2.7/encodings/utf_8.py", line 16, in decode return codecs.utf_8_decode(input, errors, True) exceptions.UnicodeDecodeError: 'utf8' codec can't decode byte 0x88 in position 297: invalid start byte *** Shutting down runit daemon (PID ... *** Killing all processes... *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 9 [ERROR ] 13:34:55 json_api:229 Error calling method `web.get_torrent_status` [ERROR ] 13:34:55 json_api:230 'NoneType' object has no attribute 'call' Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/deluge/ui/web/json_api.py", line 221, in _handle_request result = self._exec_local(method, params, request) File "/usr/lib/python2.7/dist-packages/deluge/ui/web/json_api.py", line 188, in _exec_local return meth(*params) File "/usr/lib/python2.7/dist-packages/deluge/ui/web/json_api.py", line 619, in get_torrent_status return component.get("SessionProxy").get_torrent_status(torrent_id, keys) File "/usr/lib/python2.7/dist-packages/deluge/ui/sessionproxy.py", line 154, in get_torrent_status d = client.core.get_torrent_status(torrent_id, keys, True) File "/usr/lib/python2.7/dist-packages/deluge/ui/client.py", line 504, in __call__ return self.daemon.call(self.base, *args, **kwargs) AttributeError: 'NoneType' object has no attribute 'call' Quote Link to comment
Niccarter Posted August 17, 2014 Share Posted August 17, 2014 Can't get plexWatch to work either (PlexMediaServer is installed and works great!). When I click the home screen, I get "Failed to access Plex Media Server. Please check your settings." I set the plexWatch Database to "/plexWatch/plexWatch.db" as the default did not work. When I save the Web GUI Settings, the response is a blank page with the url: http://<my ip address>:8080/plexWatch/includes/process_settings.php And in Settings (http://<my ip address>:8080/plexWatch/settings.php), the Version details show as follows: "Version Information plexWatch/Web Version: v1.5.4.2 plexWatch Version: v" Looks like plexWatchWeb is installed, but not plexWatch? Cheers Nic Quote Link to comment
Niccarter Posted August 17, 2014 Share Posted August 17, 2014 After failing to get Deluge to work, I installed gfjardim's Transmission via the Unraid Docker GUI and it works just fine... cheers Nic Quote Link to comment
heffe2001 Posted August 17, 2014 Share Posted August 17, 2014 After failing to get Deluge to work, I installed gfjardim's Transmission via the Unraid Docker GUI and it works just fine... cheers Nic While I can't help with the problem you were having with needo's Deluge, I ended up running another version (nekroze/deluge), it's based on arch linux I believe, and actually works with BT Proxy services (needo's apparently doesn't, at least I couldn't get it to work). I'm assuming the arch version is a later version with that fixed in the libraries that deluge uses... Just need to figure out how to get the lite client working with it, and I'll be good to go... Quote Link to comment
jevans04 Posted August 17, 2014 Share Posted August 17, 2014 Can't get plexWatch to work either (PlexMediaServer is installed and works great!). When I click the home screen, I get "Failed to access Plex Media Server. Please check your settings." I set the plexWatch Database to "/plexWatch/plexWatch.db" as the default did not work. When I save the Web GUI Settings, the response is a blank page with the url: http://<my ip address>:8080/plexWatch/includes/process_settings.php And in Settings (http://<my ip address>:8080/plexWatch/settings.php), the Version details show as follows: "Version Information plexWatch/Web Version: v1.5.4.2 plexWatch Version: v" Looks like plexWatchWeb is installed, but not plexWatch? Cheers Nic Host mode for the container? Have you read through this thread yet? http://lime-technology.com/forum/index.php?topic=34069.0 Quote Link to comment
Pducharme Posted August 17, 2014 Share Posted August 17, 2014 PlexConnect: https://registry.hub.docker.com/u/needo/plexconnect needo, any possibility for a new version of the PlexConnect docker ? (They release version 0.4 now). Quote Link to comment
needo Posted August 19, 2014 Author Share Posted August 19, 2014 PlexConnect: https://registry.hub.docker.com/u/needo/plexconnect needo, any possibility for a new version of the PlexConnect docker ? (They release version 0.4 now). Sure! I will work on that. Quote Link to comment
needo Posted August 19, 2014 Author Share Posted August 19, 2014 08/19/2014 (plex) Upgrade to latest version. Quote Link to comment
Pducharme Posted August 20, 2014 Share Posted August 20, 2014 PlexConnect: https://registry.hub.docker.com/u/needo/plexconnect needo, any possibility for a new version of the PlexConnect docker ? (They release version 0.4 now). Sure! I will work on that. Thank you! Quote Link to comment
mostlydave Posted August 22, 2014 Share Posted August 22, 2014 Needo, when you can could please add access to the my.cnf file in the MariaDB container? I need it to address this issue: http://serverfault.com/questions/393862/mysql-warning-ip-address-could-not-be-resolved Thanks!! Quote Link to comment
guyonphone Posted August 23, 2014 Share Posted August 23, 2014 BJP999 wrote on page 25: I had to manually map the autoprocess folder from sickbeard to sabnzbd for the autoprocessing to work correctly. Can anyone explain how he did this? Since autoProcessTV is in the sickbeard folder structure that means that folder likely exists in the image, or container. How do I get to that file to map it? Or How do I configure the Sickbeard container in gfjardim's plugin, to have the container move the scripts to my /mnt/cache/Apps/Sickbeard folder? Thank You EDIT: Found further information on this issue here: http://lime-technology.com/forum/index.php?topic=34271.0 Quote Link to comment
NAS Posted August 23, 2014 Share Posted August 23, 2014 Request MariaDB my.cnf be configurable. There are plenty of tweaks that would benefit apps such as XBMC in this config file. Quote Link to comment
Sensei73 Posted August 23, 2014 Share Posted August 23, 2014 Request MariaDB my.cnf be configurable. There are plenty of tweaks that would benefit apps such as XBMC in this config file. I agree, I am also looking how to integrate mysqltuner also to help optimizing "my.cnf". Quote Link to comment
ollejacobsen Posted August 25, 2014 Share Posted August 25, 2014 Thanks for the containers. I'm running Deluge with great succes, but I'm having problem with Plex. Plex has started once, but not more. I'm unable to reach the web gui. root@localhost:# /usr/bin/docker run -d --name="PlexMediaServer" --net="host" --privileged="true" -e VERSION="0.9.9.14.531-7eef8c6" -p 32400:32400/tcp -v "/mnt/cache/appdata/plex":"/config":rw -v "/mnt/user":"/data":ro -v "/etc/localtime":"/etc/localtime":ro needo/plex If I check the logs I get: 99% Building data structures... Done *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 34 setuser: cannot execute /usr/sbin/start_pms: [Errno 2] No such file or directory setuser: cannot execute /usr/sbin/start_pms: [Errno 2] No such file or directory setuser: cannot execute /usr/sbin/start_pms: [Errno 2] No such file or directory ... ... ... Any idea? Kind regards, Olle Quote Link to comment
heffe2001 Posted August 25, 2014 Share Posted August 25, 2014 Couple of updates for NZBDrone today, but it won't auto-update. Think you could take a look at that Needo? Quote Link to comment
Spydawg Posted August 26, 2014 Share Posted August 26, 2014 Couple of updates for NZBDrone today, but it won't auto-update. Think you could take a look at that Needo? It didn't update for me yesterday, but it did today.. Try updating again.. Quote Link to comment
needo Posted August 27, 2014 Author Share Posted August 27, 2014 Couple of updates for NZBDrone today, but it won't auto-update. Think you could take a look at that Needo? I updated it late last night. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.