sacretagent

Hi, as my old systemboard went haywire and don't let me boot any more from usb when all 16 drives are attached did i jump to this new setup which is even more frustrating no matter what i try he doesn't want to accept or my adaptec 1220SA or my sil 3114 sata cards.... he only sees my one asm162 card ... i can move that last card to any slot and he will see the disks attached .... the adaptec or the sil cards he doesn't see the disks in any of the slots anybody has some advice? thinking of buying a lsi 9211-8i in IT mode but afraid he won't see him too.... might be best to just return the setup? any advice on a ryzen board that sees the sil or the adaptec card? Greetings Sacret

ok this server has been running for more then a year with the current configuration but due to some electricity problems (aka a snake that got roasted on a transformator in the village) did this server lose his bios settings and now for the love of god i can't get him to boot from the USB stick..... i can if i remove 2 sata controller but then of course i don't have all my disks lol.... i tried everything i can think off but been busy now for like 15 hours and i can't get him to boot from the usb with all 16 disks installed .... bios shows only 12 disks.... and the usb doesn't show in these 12 disks.... only if i disable 2 onboard controllers or remove 2 sata controller physically it will show me the usb in the list but when i enable the controllers again or insert the 2 removed ones then next boot the usb is missing again.... it was working and i remember i had similar problem when i set this up but i forgot what the solution was a year ago so i was hoping if somebody knows how to solve this..... here are the bios settings screens https://drive.google.com/file/d/1-5MC436EH5eKFiVKVLlNXHPvJCgx3vqi/view?usp=sharing https://drive.google.com/file/d/1-FhypBc7UpSqMNXlXiVDBLY9p-hIaxFd/view?usp=sharing https://drive.google.com/file/d/1-S6q9zmdyhq-JRslEGJOWE7Z9TVZlQej/view?usp=sharing https://drive.google.com/file/d/1YGUg_XfvtjVwFRS7yHFBcH1ZsS0hj4ve/view?usp=sharing https://drive.google.com/file/d/1-D8I6_AK6M21WvMSBne3PpZAscMv2YCI/view?usp=sharing https://drive.google.com/file/d/1-f-b5SnVEzxSthGvMSn4RkxdFJD1_Qx3/view?usp=sharing https://drive.google.com/file/d/1-_iEyaBrbWTfdbDKRwUsbyyQHUYsFBJq/view?usp=sharing https://drive.google.com/file/d/1-Jk6TQWQn1I-tPJaySZ-oRO6FmygAl72/view?usp=sharing

mm restarted docker service and now it works ,.... weird

last update from today won't start up .. get an error 403 or so

newest rutorrent upgrade has changed parameters... rtorrent will not start... .. can you please advise on the new parameters... old ones are peer_exchange and use_udp_trackers.... had to # them before rtorrent would start....

as that requires your unraid gui to respond... with unmenu the logs were refreshed every 2 minutes and even when your server hung most of the time you were able to see on the unmenu screen what happened ... anyway we will have to adjust as always.... but the spacing on this new gui is to wide can we get an option to make it like before ?

Seems this update is the death of unmenu ? ;( upgraded one server .... had a lot of issues with your port 443 and one of my dockers ... which i managed to change by changing the dockers IP but unmenu is a mess now .... guess i will have to learn to live without it ... any way we can add like the last 20 lines of the system log optionally to the dashboard .... i understand that not everybody would want that .... but the main reason why i kept unmenu going was because of the logs... when i had an issue with the unraid gui i always had unmenu nicely pointing out where the issue could be..... Also lost some of my custom images for some dockers or can i put them in a different folder ? tended to use the unmenu folder for those 555 Is the go file still being parsed as i still have a few others in there #give nobody shell access usermod -s /bin/bash nobody #usermod -G mysql mysql #create sshd lastlog touch /var/log/lastlog #content cp /boot/custom/content/contentcatalog /etc/cron.weekly/ chmod +x /etc/cron.weekly/contentcatalog #crontab crontab -l > /tmp/file1; echo '#Start movie server' >> /tmp/file1; echo '01 08 * * * wakeonlan 48:5B:39:F5:DB:0B' >>/tmp/file1; crontab /tmp/file1; rm /tmp/file1

weird Turned out to be a disk causing this ? i removed the disk 10 which i added last and hey parity rebuild succeeded overnight .... not sure what could be the problem... disk is OK according smart.... will try to change cable between disk and sil controller .... any other bright ideas to further troubleshoot this? power should be ok this enclosure ran 13 disks for years...

r2d2-diagnostics-20170625-1024.zipHi, Got same lockup issue.... once a little bit load on the server it locks up... can't run parity check ....as then it locks up... same with plex scan .... not sure when it started i know 15th it ran a complete parity check without finding errors.... last boot now i disabled automount of my smb share of the other server if people check the logs .... only way to get to the GUI after a "unclean shutdown" is to remove a disk so it won't start {so any errors about disk 10 not being there is because i removed it before boot} attached diagnosis report... will run memtest now for a few hours...

squid , something wrong with the newest version... got that there is a newer version but it doesn't have the same "format" as the other plugins and it fails to upgrade ... where other plugins upgrade fine it says newest version 2017.04.29b i am on 2017.04.09 the title in the plugins page is this error i get on both servers plugin: updating: community.applications.plg Cleaning Up Old Versions plugin: downloading: https://raw.github.com/Squidly271/community.applications/master/archive/community.applications-2017.04.29b.txz ... failed (File I/O error) plugin: wget: https://raw.github.com/Squidly271/community.applications/master/archive/community.applications-2017.04.29b.txz download failure (File I/O error) like i said other plugins upgrade fine only this one fails on both servers

well installing the powerdown plugin solves the issue again array shut down nicely last night i don't mind troubleshooting but 2 times i tried powerdown without plugin and really "NOTHING" happens no umounts not nothing it is like typing clear in terminal but at least clear cleans up your terminal powerdown did nothing lol

server didn't power down last night ;( from cli /usr/local/sbin/powerdown or just powerdown powerdown or /usr/local/sbin/powerdown does NOTHING .... going to install the package again after i find this restriction and delete the restriction

server didn't power down last night ;( from cli

hi guys , how do i shutdown my server now if no powerdown is installed ? running 6.2 before i had this in my go file what would i need to call now for a clean shutdown ?

thx works as expected now.... chosen options are on the screen now