mikejp

Nothing gets changed until the very end when it asks you to change values, and then confirm. You are safe. For what it's worth I re-downloaded the txt file in the first post, and using notepad I did a search and replace of /root/mdcmd to the new path, saved it to my flash drive and then ran the script. ...and what is the "new path" ? Can the author modify this Script for v6.1.4 please? Thanks http://lime-technology.com/forum/index.php?topic=29009.msg402678#msg402678

+1 ...have 3) 4TB drives to preclear

From the Github page: If you want to download a later version of -latest than what you already have, then delete the two files first: cd /boot/plugins rm webGui-latest* wget --no-check-certificate https://github.com/limetech/webGui/raw/master/webGui-latest.plg installplg webGui-latest.plg Shut them off on the display tab on the Settings page... On the bottom right hand corner of the Main page.

I just added a new disk and reboot and it seems non array disk do actually show. So it is either the fact my first attempt was via USB or that emHTTP is not updating. Possibly both. I just added 3 drives by stopping the array, added the drives, & restarted the array. No reboot necessary...

+1

http://www.buy.com/prod/kingston-8gb-4gb-x-2-datatraveler-generation-3-g3-usb-flash-drive/217292024.html

http://lime-technology.com/forum/index.php?topic=12767.msg121131#msg121131

+1 After having various power related problems with various builds over the years --- including both my unRaid servers, using power supplies from Corsair, Antec, Rosewill, etc., I started using SeaSonic X-Series Gold power supplies only. They are more expensive, (go on sale regularly though) but in my opinion---worth it!! I have had no power related issues with any of my 'puters since! Just my 2 cents worth --- YMMV

Not on Kodachrome? PATA drive? It's your build... & not mine

Just a quick Thank You!!! to madburg for the slick M1015 flash package. I used this on a card last night and it worked perfectly, it really can't get much simpler. Please keep up the great work! Add me to the list THANK YOU madburg!! I just flashed 2 M1015s with no problems. The package makes it so simple... even I can do it Thanks again... SBRM1015.zip

Was running preclear on a Hitachi 5K3000 drive, in a Rosewill external enclosure, via e-sata, under 5.0b6a when it quit with the following message: malloc: unwind_prot.c:249: assertion botched free: underflow detected; mh_nbytes out of range Aborting...Aborted Any ideas as to the problem?? Thanks syslog.txt