ozzman39
-
Posts
11 -
Joined
-
Last visited
ozzman39's Achievements
Noob (1/14)
1
Reputation
-
ozzman39 changed their profile photo -
Purchased some Unraid sticker badges 3 inch in black on 3.27.19. Been wanting to get some for a while glad they have become available. also I would be interested in a polo shirt if more sizes became available in the grey
-
Changed Status to Solved
-
Terns out it was the 2 ram slots on the board thanks for the suggestions. shes still up and running just need to swap the board out.
-
Updated firmware to latest version IRQ issue still present. Soon as I got home and turned it on to do the updates she started beeping at me was a ram error. looks like 2 of the ram channels went bad I moved them 2 to other slots beeping went away and ran 3 passes on memtest no error. That had to be it. Il report back either way and change the status of this. and of course I am going to change out the board. Thanks
-
Thanks I will give it a try I have been having the IRQ16 issue since I built this box. When I built it I updated the firmware and it persisted so that issue has been happening since the beginning but any Issues I can fix the better. didn't mention it because I had actually forgotten about it.
-
System completely locking up. Runs for about 27 hours then becomes completely unresponsive. I have run a memtest on it with zero issues found. the only thing that has changed I had a docker container running on it and science this started I have shut it down has not made a difference (Pihole). If in gui mode it still shows the login screen if in the standard mode I get no output at all. First time this happened it blew out my docker image and I had to rebuild it. Also I was a couple versions back and tried updating with the same result tower-diagnostics-20190227-2352.zip
-
Are these still available? same model as these correct? https://www.neweggbusiness.com/product/product.aspx?item=9b-17-121-405 the link i provided is for the SUPERMICRO CSE-M35T-1B not CSE-M35T1
-
Is this card still available? ? As I'm assuming it's supported by unraid?
-
Im not in dire need of it it would of been handy for the drives I have laying around in this little test rig I built. Also im guessing your referring to one of the cards in the supported list? Promise Ultra100/133 TX2 [PDC20268] http://www.lime-technology.com/wiki/index.php?title=Hardware_Compatibility#PCI_IDE_Controllers thanks for the feedback
-
yea its not showing up in unRAID so i take it there is no other trick or driver pack i can install to get it to show up?
-
hello I am new to unRaid and was hoping for a little help I have a (SIL0680) Model SD-ATA133R and was hoping to use it with unRaid is there a way to get controller cards to work that are not on the supported list?? also the card is detected the card in the bios Also i apoligise if this has been covered already in the forums I have not found anything on it Link to the specific card http://www.ebay.com/itm/331965019047?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT just recently built a little test rig to lern unraid plan on building a better machine down the road System Overview unRAID system: unRAID server Trial, version 6.2.4 Model: Custom Motherboard: Intel Corporation - DQ45CB Processor: Intel® Core™2 Quad CPU Q6600 @ 2.40GHz HVM: Enabled IOMMU: Disabled Cache: L1-Cache = 32 kB (max. capacity 32 kB) L2-Cache = 4096 kB (max. capacity 4096 kB) Memory: 8 GB (max. installable capacity 8 GB) CHANNEL A DIMM0 = 2048 MB, 800 MHz CHANNEL A DIMM1 = 2048 MB, 800 MHz CHANNEL B DIMM0 = 2048 MB, 800 MHz CHANNEL B DIMM1 = 2048 MB, 800 MHz Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000Mb/s, full duplex, mtu 1500 Kernel: Linux 4.4.30-unRAID x86_64 OpenSSL: 1.0.2j P + Q algorithm: prefetch64-sse (9440 MB/s) + sse2x4 (6644 MB/s) Uptime: 1 days, 3 hours, 50 minutes, 4 seconds
