sambo
Members-
Posts
71 -
Joined
-
Last visited
Converted
-
Gender
Undisclosed
-
Personal Text
moo
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
sambo's Achievements
Rookie (2/14)
1
Reputation
-
Its less hardware, and less management since only one OS is running. Both server have redundant psu. But yea each system have his failure states, but i accept those.
-
Hello, Possible to increase this 30 disks limit ? Wanted to "join" my servers with HBA card so that 30 disks limit will be reached quickly Thanks
-
Ok then I will try to flash to .15 to see if that fix my issue. Thanks Bob
-
sambo started following Any experience with Shairport and UnRAID? and AOC-SASLP-MV8 break shutdown
-
Hello, I am having issue with my 2 x AOC-SASLP-MV8 cards. Each time I shutdown, box reboot instead. If I remove 1 card, box shutdown correctly, if I plug the 2 ... no ... Always shutdown correctly wih one card, removing the first or the second one, same. I have switched pci ports too, but same. I dont have any idea, and SuperMicro support dont help me. Cards are on .21 firmware on a X8SIL motherboard. I read somes topics about flashing cards to the .15 firmware. Thats still a good idea ? It will handle my 6 TB drives ? Thanks
-
Since unraid is able to spindown disk after some inactivity time, i think it shoud be possible, atleast i hope
-
Hello, Is it possible to add on next release the spinup information on dmesg like we have for spindown ? Thanks for all this good work!
-
Same issue here since 6.2, no update? Cant access anymore my public share on W10 and OpenElec.
-
unRAID Server Release 6.2 Stable Release Available
sambo replied to limetech's topic in Announcements
No issue, runned fine on previous stable version too . -
unRAID Server Release 6.2 Stable Release Available
sambo replied to limetech's topic in Announcements
For me yes, all my shares are public. Just noticed that i can change settings from 'Shares/Disk?name=cache' pages. Each time i press Apply, settings are back to previous value. So SMB down, and cant even setup NFS lol Any idea? -
unRAID Server Release 6.2 Stable Release Available
sambo replied to limetech's topic in Announcements
Some news logs from my issue with smb. [2016/10/02 19:11:00.797693, 0] ../lib/util/fault.c:78(fault_report) =============================================================== [2016/10/02 19:11:00.797735, 0] ../lib/util/fault.c:79(fault_report) INTERNAL ERROR: Signal 11 in pid 21704 (4.4.5) Please read the Trouble-Shooting section of the Samba HOWTO [2016/10/02 19:11:00.797748, 0] ../lib/util/fault.c:81(fault_report) =============================================================== [2016/10/02 19:11:00.797757, 0] ../source3/lib/util.c:791(smb_panic_s3) PANIC (pid 21704): internal error [2016/10/02 19:11:00.798391, 0] ../source3/lib/util.c:902(log_stack_trace) BACKTRACE: 7 stack frames: #0 /usr/lib64/libsmbconf.so.0(log_stack_trace+0x1a) [0x2b362731bf2a] #1 /usr/lib64/libsmbconf.so.0(smb_panic_s3+0x20) [0x2b362731c000] #2 /usr/lib64/libsamba-util.so.0(smb_panic+0x2f) [0x2b36249e657f] #3 /usr/lib64/libsamba-util.so.0(+0x1b786) [0x2b36249e6786] #4 /lib64/libpthread.so.0(+0x113b0) [0x2b36247bf3b0] #5 /lib64/libc.so.6(+0x21e6d) [0x2b3628701e6d] #6 [0x56398c9c2c80] [2016/10/02 19:11:00.798435, 0] ../source3/lib/util.c:803(smb_panic_s3) smb_panic(): calling panic action [/usr/share/samba/panic-action 21704] sh: /usr/share/samba/panic-action: No such file or directory [2016/10/02 19:11:00.804878, 0] ../source3/lib/util.c:811(smb_panic_s3) smb_panic(): action returned status 127 [2016/10/02 19:11:00.804938, 0] ../source3/lib/dumpcore.c:303(dump_core) dumping core in /var/log/samba/cores/smbd [2016/10/02 19:11:00.823996, 0] ../lib/util/fault.c:78(fault_report) =============================================================== [2016/10/02 19:11:00.824029, 0] ../lib/util/fault.c:79(fault_report) INTERNAL ERROR: Signal 11 in pid 21706 (4.4.5) Please read the Trouble-Shooting section of the Samba HOWTO [2016/10/02 19:11:00.824040, 0] ../lib/util/fault.c:81(fault_report) =============================================================== [2016/10/02 19:11:00.824047, 0] ../source3/lib/util.c:791(smb_panic_s3) PANIC (pid 21706): internal error [2016/10/02 19:11:00.824628, 0] ../source3/lib/util.c:902(log_stack_trace) BACKTRACE: 7 stack frames: #0 /usr/lib64/libsmbconf.so.0(log_stack_trace+0x1a) [0x2b362731bf2a] #1 /usr/lib64/libsmbconf.so.0(smb_panic_s3+0x20) [0x2b362731c000] #2 /usr/lib64/libsamba-util.so.0(smb_panic+0x2f) [0x2b36249e657f] #3 /usr/lib64/libsamba-util.so.0(+0x1b786) [0x2b36249e6786] #4 /lib64/libpthread.so.0(+0x113b0) [0x2b36247bf3b0] #5 /lib64/libc.so.6(+0x21e6d) [0x2b3628701e6d] #6 [0x56398c9c2c80] [2016/10/02 19:11:00.824665, 0] ../source3/lib/util.c:803(smb_panic_s3) smb_panic(): calling panic action [/usr/share/samba/panic-action 21706] sh: /usr/share/samba/panic-action: No such file or directory [2016/10/02 19:11:00.832074, 0] ../source3/lib/util.c:811(smb_panic_s3) smb_panic(): action returned status 127 [2016/10/02 19:11:00.832117, 0] ../source3/lib/dumpcore.c:303(dump_core) dumping core in /var/log/samba/cores/smbd Gona try safe mode soon, maybe a txz somewhere making the issue! -
unRAID Server Release 6.2 Stable Release Available
sambo replied to limetech's topic in Announcements
Done, same result, samba is enable yes, I can see it in Windows network. Same output for nmblookup and smbclient. -
unRAID Server Release 6.2 Stable Release Available
sambo replied to limetech's topic in Announcements
root@Tower:~# ip route default via 192.168.1.1 dev eth0 10.8.0.0/24 dev tun0 proto kernel scope link src 10.8.0.1 127.0.0.0/8 dev lo scope link 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 root@Tower:~# /usr/bin/nmblookup -M -- - 2>/dev/null | /usr/bin/grep -Pom1 '^\S+' INFO: -
unRAID Server Release 6.2 Stable Release Available
sambo replied to limetech's topic in Announcements
Dont think, i only have an eth0 interface. root@Tower:~# smbclient -L 127.0.0.1 -N -d 10 INFO: Current debug levels: all: 10 tdb: 10 printdrivers: 10 lanman: 10 smb: 10 rpc_parse: 10 rpc_srv: 10 rpc_cli: 10 passdb: 10 sam: 10 auth: 10 winbind: 10 vfs: 10 idmap: 10 quota: 10 acls: 10 locking: 10 msdfs: 10 dmapi: 10 registry: 10 scavenger: 10 dns: 10 ldb: 10 tevent: 10 lp_load_ex: refreshing parameters Initialising global parameters INFO: Current debug levels: all: 10 tdb: 10 printdrivers: 10 lanman: 10 smb: 10 rpc_parse: 10 rpc_srv: 10 rpc_cli: 10 passdb: 10 sam: 10 auth: 10 winbind: 10 vfs: 10 idmap: 10 quota: 10 acls: 10 locking: 10 msdfs: 10 dmapi: 10 registry: 10 scavenger: 10 dns: 10 ldb: 10 tevent: 10 Processing section "[global]" doing parameter include = /etc/samba/smb-names.conf doing parameter netbios name = Tower doing parameter server string = Media server doing parameter hide dot files = no doing parameter security = USER doing parameter workgroup = Workgroup doing parameter local master = yes doing parameter map to guest = Bad User doing parameter passdb backend = smbpasswd doing parameter encrypt passwords = Yes doing parameter null passwords = Yes WARNING: The "null passwords" option is deprecated doing parameter map archive = No doing parameter map hidden = No doing parameter map system = No doing parameter map readonly = Yes doing parameter create mask = 0777 doing parameter directory mask = 0777 doing parameter log level = 9 doing parameter syslog = 0 WARNING: The "syslog" option is deprecated doing parameter syslog only = Yes WARNING: The "syslog only" option is deprecated doing parameter show add printer wizard = No doing parameter disable spoolss = Yes doing parameter load printers = No doing parameter printing = bsd doing parameter printcap name = /dev/null doing parameter invalid users = root doing parameter unix extensions = No doing parameter wide links = Yes doing parameter use sendfile = Yes doing parameter aio read size = 4096 doing parameter aio write size = 4096 doing parameter acl allow execute always = Yes doing parameter include = /boot/config/smb-extra.conf doing parameter include = /etc/samba/smb-shares.conf pm_process() returned Yes lp_servicenumber: couldn't find homes added interface eth0 ip=192.168.1.6 bcast=192.168.1.255 netmask=255.255.255.0 Netbios name list:- my_netbios_names[0]="TOWER" Client started (version 4.4.5). Connecting to 127.0.0.1 at port 445 Socket options: SO_KEEPALIVE = 0 SO_REUSEADDR = 0 SO_BROADCAST = 0 TCP_NODELAY = 1 TCP_KEEPCNT = 9 TCP_KEEPIDLE = 7200 TCP_KEEPINTVL = 75 IPTOS_LOWDELAY = 0 IPTOS_THROUGHPUT = 0 SO_REUSEPORT = 0 SO_SNDBUF = 2626560 SO_RCVBUF = 1061296 SO_SNDLOWAT = 1 SO_RCVLOWAT = 1 SO_SNDTIMEO = 0 SO_RCVTIMEO = 0 TCP_QUICKACK = 1 TCP_DEFER_ACCEPT = 0 session request ok protocol negotiation failed: NT_STATUS_CONNECTION_DISCONNECTED -
unRAID Server Release 6.2 Stable Release Available
sambo replied to limetech's topic in Announcements
For Windows, there are sites online with info on that error. And with no other info on the error, plus possibly no other users reporting it, I think you should probably start with the Windows ideas, and work through them first. One site I found (disclaimer: don't know them, can't vouch for them), but they did provide multiple potential issues with possible fixes, and a few testimonials, is this one -> Eassos: How to fix error code 0x80004005. However, I don't think I saw a single issue related to networking or permissions, so it may not be of any help. Googling 0x80004005 found a number of other options. Obviously they won't have a fix for unRAID, but you might find an issue that could inspire the right idea, what the real problem is. For Linux, need a little more info, the exact error message and any error codes with it, and which program or function reported the timeout. Can you test running that command on unraid host. smbclient -L 127.0.0.1 -N -d 10 It end "by protocol negotiation failed: NT_STATUS_CONNECTION_DISCONNECTED" Even on host i cant list share -
unRAID Server Release 6.2 Stable Release Available
sambo replied to limetech's topic in Announcements
Windows 10 & Linux(libreelec/openelec) All share set as Public. I saw TOWER in WORKGROUP, but when i try to open it, have an error Error : 0x80004005 on Windows. Linux say Timeout.