aboodness Posted July 19, 2014 Share Posted July 19, 2014 Looking for a little feedback, I have PMS running great, however I've been toying with the idea of running plex connect. I've been able to install everything into the appropriate directories ( at least from what I found in other forums) but those directories are not in the config/ plugin folder, so obviously I cannot see it via the Unraid GUI, when I try to start PlexConnect (sudo ./PlexConnect.py) the service tries to start but then it fails and just shuts down. From the forums I've read the install is supposed to be pretty straight forward, not sure where I mad a bad turn. Anything helps, thank you. Quote Link to comment
jevans04 Posted July 20, 2014 Share Posted July 20, 2014 Are you running version 5 (32-bit) or version 6 (64-bit) unRaid software? Did you install Plexconnect using a plugin? Ver. 5: http://lime-technology.com/forum/index.php?topic=29193.0 Ver. 6: http://lime-technology.com/forum/index.php?topic=31530.msg285753#msg285753 Quote Link to comment
lanky8804 Posted July 20, 2014 Share Posted July 20, 2014 I Run PlexConnect using this plugin with no issue at all. Make sure you install and change all the dirs to your cache drive as otherwise will wipe all settings on each reboot. Be aware that when you press upgrade it can take a little time so be patient. http://lime-technology.com/forum/index.php?topic=33341.msg306949#msg306949 Quote Link to comment
daveholst Posted September 21, 2014 Share Posted September 21, 2014 On a side note is it possible to use the themes and skins mac & windows users have been experimenting with on plexconnect on an unraid box? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.