xisplo

which part, the cards or not in JBOD? We will verify that, thank you. Changing Subject to [Solved]

this solved it, thank you!

2x SM AOC-SAS2LP-MV8 cards in JBOD Thank you for the recommendation on the fs repair, we are trying it now.

Thank you, Please find attached. (we are aware of the SMART errors, these are old WO disks being used to template) ms2-diagnostics-20211101-1309.zip

of course the rebuild of the replaced disk took place. I've actually swapped in a second 3Tb and did a full rebuild and still the "size" identity shows 2TB

Hello Everyone, I dont want to recreate the Array as this is a test bench before i go live with it, and this was a test which I'd rather resolve than scratch and rebuild. On my current production environment, I can easily swap disks and everything works correctly. However, i cant solve this issue. Disk was precleared. I swapped in a 3TB for an artificially failed 2TB (unplugged). Any suggestion? The disk information shows 3TB, I'm just assuming this is a display issue under "size" (note the parity is 4Tb so the 2TB limit consideration does not apply)

Thank you! That is exactly the plugin I had found in the past. On another note, I was under the impression the docker move was to phase out plugins. but if they are staying, better for me Cheers!

Hello! In the past I had found a post regarding mapping shares on Server_A from Server_B via plugin. I was first looking into this when I noticed I was running out of usable space. I wanted to build a secondary server (server_B) but have shares mapped to the other one (Server_A). Primarily for Media management (plex). I found a thread that mentioned a plugin that would do just that. I can no longer find such thread/forum entry. Since plugins are a thing of the past, or soon to be, what would be the ideal way to map shares on Server_A from Server_B. I'd rather it be software via ethernet.

well... I'm careless and unRaid is amazing. Evoked Mover Script and opened up syslog lo and behold. There it was. 3 lines highlighted in red: Oct 28 06:55:20 MS kernel: XFS (md6): Corruption warning: Metadata has LSN (1:107007) ahead of current LSN (1:1425). Please unmount and run xfs_repair (>= v4.3) to resolve.[/Code] stopped array checked maintenance mode check box hit start (start in maintenance) launched putty, SSH-ed into server (I rather use this than the GUI check) type [code]xfs_repair /dev/md6 wait 5 minutes finished stopped array, and started it Fixed! Now only if I had just waited a bit before posting. Hope this helps someone. plo

Good morning, I decided to upgrade my unRaid server to the latest build today. Everything went smoothly for the most part. I currently have 6 shares One of them has gone empty, and its one of the most important ones. Files still show on disks, but UNC-ing into the folder shows it empty. browsing through unRaid UI Shares > TV Shows shows nothing in it I've rad xfs_repair -v \dev\md1 to no avail. I read the 2 other posts of people with similar issues. Any ideas? plo

I would say that no, LT's support for their containers has NOT ended (their last update to Plex was 9/13 (although BTSync lists the latest change as 7/2) But, if you absolutely want to run the absolute latest and greatest version of Plex (instead of something that just plain works), then the LT docker is not for you. Switch to Linuxserver's or Binhex's who concentrate on supporting those apps instead of LT where they have multiple areas to concentrate on (and their docker containers are not their priority - nor should it be) Thanks, will do and move to the "latest and greatest" docker containers. Hi, under docker > PMS config make sure plex is running Network type: Host Privileged: Check Bind time: Check PLo

Hello? Has the support for this container ended? Please advise if so. Thank you for all the work you've done, PLo

Hello, Plex has recently release one of the most anticipated updates yet: the ability to control end user bandwidth. When do you think you'll have the time to release the new update into the docker environment? thank you for all your work, PLo

Heres an example of a plex media server docker config page I use shared folders to keep movies/TV Shows /config is the location of your plex configuration. /Movies is the location of your shared folder containing movies /TV Shows (same as above) in your case, since you have it mapped per drive you should add Container volume: Host Path: /disk1 /mnt/disk1 /disk2 /mnt/disk2 I believe that would work for you. I find it easier to use Shares

I get that, but I don't use plugins nor do I plan on loading any type of plugin, not even one for support. Thus I come on to the forums. Lets bury the hatchet. Have a great weekend. Cant wait for 6.2 and dual parity. Again, thanks. And if need-be please delete/move this thread. xisplo