fishface

Members
  • Posts

    236
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

fishface's Achievements

Explorer

Explorer (4/14)

3

Reputation

2

Community Answers

  1. Maybe I'm being pedantic, but I do not have that option in v6.11.5. Split Level = automatically Split any Level The only option I have out of the 7, with the word "any" is: Automatically split any directory as required So, I guess it's that one, unless I need to upgrade or it's a plugin for this setting.
  2. I have Disk 1 and Disk 2, set as a share for TV Shows, allocation method Fill Up, Minimum Free Space = 10GB, and Manual - do not split directories. I want to fill up the first disk, and when it gets to 10GB left, start to automatically use Disk 2 - so do I have this set right? I not sure if I should have the split level set at Automatically split any directory as required for it to switch to disk 2.
  3. Support, very promptly, sent me a new key, great customer service from the unraid team.
  4. So, I restored from my backup, on a new flash drive, and I'm up and running, but unraid reports. Unraid OS Multiple License Keys Present Purchase key. The guide doesn't mention duplicate keys, and I only have one, but I did do what it suggested below. Please copy the correct key file to the config directory on your USB Flash boot device I did upgrade in August 2023 to a PlusKey, wonder if that has caused an issue? I did notice that I do have a Basic.key and a Trial.key, so I removed those, as that was suggested as a solution in the forums, I rebooted, after doing that is now says "Unraid OS GUID Error" I think I understand some of the issue, the backup has a Plus.key but with the old faulty flash drive, but I did copy the Plus.key to the config directory on the new flash drive, so I cannot see what I did wrong. I have emailed support, so let's see what they say.
  5. unraid has been working fine, until today. Clean power down, then added a Asmedia ASM1061 2 port SATA controller as I just need a couple more ports. Rebooted, ASmedia card detected in BIOS, which detected new disk, unraid came online. Logged in, new drive is there, but notice that one of the existing drives was missing. Power-off again, and sure enough, I had dislodged a power cable to the disk, re-connected. Power-on again, but this time it does boot fully, it starts to boot, detects sda1, does a few more things, then I see "Buffer I/O error on dev sda1", repeated a few times, and then later "Cannot mount /dev/sda1", and "device descriptor error read/64, error -71" So is my flash drive failed? I have tried several USB ports, and rebooted at least 5 times, also repeated with the ASmedia un-installled, made no difference. Before I made the changes I did backup the flash drive. Also, when I plug the flash drive into a Windows PC, it does open it. What is the best way to recover from this? Thanks.
  6. Apologies, my error, I created the blank file one directory up, now moved to the correct one and all is good - sorry to have wasted your time.
  7. Linux cifs mount was posted earlier, windows mapped drive also show the same free space as the cifs mount.
  8. Diags attached pitsford-diagnostics-20230822-0951.zip On unraid dev/md1 /mnt/disk1 xfs rw,noatime,nouuid,attr2,inode64,logbufs=8,logbsize=32k,noquota 0 0 /dev/md2 /mnt/disk2 xfs rw,noatime,nouuid,attr2,inode64,logbufs=8,logbsize=32k,noquota 0 0 /dev/md3 /mnt/disk3 xfs rw,noatime,nouuid,attr2,inode64,logbufs=8,logbsize=32k,noquota 0 0 /dev/sdf1 /mnt/cache btrfs rw,noatime,ssd,discard=async,space_cache=v2,subvolid=5,subvol=/ 0 0 shfs /mnt/user0 fuse.shfs rw,nosuid,nodev,noatime,user_id=0,group_id=0,default_permissions,allow_other 0 0 shfs /mnt/user fuse.shfs rw,nosuid,nodev,noatime,user_id=0,group_id=0,default_permissions,allow_other 0 0
  9. Did that, well it hung at stopping array for 10mins, so rebooted, and it still shows the same amount of free space, just disk 1.
  10. Hmm, neither method worked, how often does it update?
  11. I was sort of guessing that might be the case, I'll just touch a file to get it in there as it threw me a bit when looking at CIFS mounts on other hosts. Filesystem Size Used Avail Use% Mounted on //192.168.1.10/TVShows 5.5T 5.2T 331G 95% /mnt/unraid
  12. I have a TVShow share which is set to only Disk1 and Disk2, disks are 6TB each Disk 1 has 354GB free and Disk 2 shows as having 5.96TB free. Under Share view, it shows only 354GB (disk 1) should it not be a combined total of disk1 and 2 free space? So 354GB + 5.96TB? Version: 6.11.5
  13. I re-downloaded the docker image and it's back up and running.
  14. binhex emby docker, been using it for a week or so, default config accept for the /mnt/user/TVShows path. Today, I went to add a new path for /mnt/user/Music, and incorrectly left the container path as "media", it failed when adding it, I realized my error, went to redo but the docker is now completed gone from the docker list in the UI and appears to have gone. Is this expected behavior? And has it really gone and is still there just need to refresh/re-link it? pitsford-diagnostics-20230102-1628.zip
  15. I re-copied the file from my local disk to unraid, and rsync ran fine this time, so the file that was unraid must have got corrupted at some point, possible as the file has been moved around a few times during disk issues. I will also run a file system check.