• Posts

    19
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

[email protected]'s Achievements

Noob

Noob (1/14)

0

Reputation

  1. Hello, my Unraid server sometimes reboots uncontrollably and then performs a parity check which is always without error. I have no idea for what reason this happens, maybe someone here on the forum can help me locate the problem. I have attached the file with the system diagnosis. Best Rgards Dieter unraid-diagnostics-20220222-1140.zip
  2. Hi dlandon, many thanks, that was the problem. Now it`s working fine Best regards DIeter
  3. Hi all, I`m struggeling to setup DLNA/Upnp within Squeezebox LMS. Did anybody get the DLNA/UPNP plugin up and running, it´s Upnp/DLNA Media Interface V1 from Andy Grundman. LMS 7.9 is installed in a docker, Unraid version is 6.3.2. I`m trying to stream some audio files from jRiver to one of my Squeezebox Touch, but no DLNA devices are shown in jRiver. Same within the Buble UPNP App in Android. Other UPnP devices (e.g. an Oppo blueray player) are listed in jRiver, but without LMS. Any idea is very much appreciated.
  4. Hi all, I`m struggeling to setup DLNA/Upnp within Squeezebox LMS. Did anybody get the DLNA/UPNP plugin up and running, it´s Upnp/DLNA Media Interface V1 from Andy Grundman. LMS 7.9 is installed in a docker, Unraid version is 6.3.2. I`m trying to stream some audio files from jRiver to one of my Squeezebox Touch, but no DLNA devices are shown in jRiver. Same within the Buble UPNP App in Android. Other UPnP devices (e.g. an Oppo blueray player) are listed in jRiver, but without LMS. Any idea is very much appreciated.
  5. Thanks for your quick reply. I`m aware of this non ideal configuration, but it worked perfetly since years without any problem. I have 2 of this esata enclosures, with both the same problems occurs. I will try to change the esata interface card in the main server. Anyway, many thanks.
  6. Thnat`s what I already did. Changed 3 new hard drives, all precleared without any issue, same with power and sata cables. I assume the problem is software related, the rebuild stops everytime after appr. 3 hours with an unmounted disk 2? Any further idears what the problem could be is very much appreciated, thanks
  7. Many Thanks, but I don`t think it`s a cable problem. I`m using an external E-Sata Lian Li EX 503 enclosure (I hav e2 of them with same issue) and swapped hard disk 2 (Disk 2: WDC_WD40EZRX-75SPEBO_WD-WCC40LPEKVN) with hard disk 1 phyically in the Lian Li enclosure, but the problem still stys with disk 2. Any other suggestions, please :-)
  8. Hi , my unraid server version is 6.2.4. One of my hard disks showed a red dot some time ago. When I tried to start data rebuild with a new drive ( 4TB same size as the old one), the data rebuild process starts for a couple of hours and finished with a red dot (drive not present again). The preclear process of this new drive finished without any issues. I alread changed the harddisk interface slot to exclude any physical problems, but the error is still the same. I attached the diagnostic file of my configuration. Any help to solve is welcome Best regards Dieter unraid-diagnostics-20161205-0922.zip
  9. Hi, I`m running unraid 6.1.9 without a problem, installed the preclear GUI plugin and the script itself. When I start the preclear GUI, a pop up windows is presented, but when I hit start, the following message is presented, without any further progress. ------------------------------------------------------- SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.$ Do you wish to continue? Capitol "Y", lower case "es" ------------------------------------------------------------------------------------------------------ Does anybody have an idea what the problem could be. Many thanks in advance
  10. Unraid 5.0 rc16 Can I replace 2 disk at the same time with larger disks and rebuild all data from the parity drive?
  11. I have exactly the same issue, slow write of appr. 35MB when files are copied from Windows7 to a user share with cache disk enabled. But when I copy directly to the cache disk, the transfer speed is 100MB. I tied it also with the latest unraid version 5.0 rc13. No additional plugins are installed and my system is a HP40L with 4M Ram. What is the difference between the 2 options "use cache disk=YES" and "use cache disk=ONLY"
  12. Which is the best directory to install Squeezebox Server 7.7.1? Instead of /usr/local/slimserver which is the default, but the RAM is cleared with reboot. Used Unraid is V5.0 rc12a.
  13. Many Thanks, but the backup drive is directly connected to the unraid system USB-port, therefor I`m looking for an backup solution in the unraid system itself. Without using any external WIndows computer Regards Dieter
  14. Hi all, I`m a newbe to unraid and just installed 5.0rc12a successfull. I would like setup a backup function for one of my user shares to an external USB-hard drive which starts every morning 3pm (more a sync between the share and the USB drive, the user share should be the master) . I didn`t found any older posts in this forum with this topic, but I think I`m not the only person which need USB-Backup. Does anybody has a easy to implemet advice how I can implemet this. Many Thanks in advance. Dieter
  15. Not sure I really understand this question. The cache drive is in place for the fastest possible writes, skipping the data/parity disks. There's no way to do parallel writes. If you want to write to the data & parity disk, you can write directly to the disk share. Many Thanks, I thought It could be possible to write data to the cache disk and in parallel start the task of writing the received data directly to the data abd parity hard disks, with a slower speed, this is clear, but without any delay. The advantage of my idea is that I do not have to configue the write pass through process at a fixed time, e.g. 3am?