[Free/ Toronto, Canada] 18-Bay Cases | SAS Expanders | GB + FC Switches


trini

Recommended Posts

Pickup only - shipping most of this stuff will be fairly costly.

 

Edit - more stuff found..

Edit - even more stuff found..

Edit - all gone..

 

All gear is free - I was going to sell them but got lazy.  Donations of pizza and beer money accepted!  ;D

  • Gear worked as of the point I stopped using them
  • Items will get crossed off as they're claimed
  • I won't reserve anything for more than a week for anyone

 

The freebies:

Available:

  • All gone!

 

Reserved:

  • [squid | 2016-01-16] 2 x 3U SGI Rackable 16+2 bay hot swap chassis w/ 550W redundant PSU
  • [squid | 2016-01-16] 1 x Foundry EdgeIron 24G 24-port gigabit switch
  • [squid | 2016-01-16] 2 x Chenbro 12803 28-port SAS Expander
  • [Whaler_99 | 2016-01-16] 1 x 3U SGI Rackable 16+2 bay hot swap chassis w/ 550W redundant PSU
  • [Whaler_99 | 2016-01-16] 1 x IBM BladeCentre Chassis + HS21 Server blades + PDU - Blades have Xeon E5xxx CPUs, memory, disks
  • [Whaler_99 | 2016-01-17] 1 x Foundry EdgeIron 24G 24-port gigabit switch
  • [Whaler_99 | 2016-01-17] 1 x Intel S5000PSL Server Board with 2 x Xeon E5335 CPUs and 8GB DDR2 ECC FBDIMMs (with heatsinks if I can find them)
  • [Whaler_99 | 2016-01-17] 2 x Brocade Silkworm 3800 16-port 2Gb fibre-channel switch
  • [Whaler_99 | 2016-01-17] 2 x 2Gb fibre-channel adapters (PCI-X)
  • [Whaler_99 | 2016-01-17] 2 x 2Gb Infiniband adapters (PCI-X)
  • [Whaler_99 | 2016-01-17] 1 x IBM ServeRAID BR10i (LSI 1068, PCI-E) 8 x SAS adapter (note: 2TB drive support limit), with breakout cables
  • [Whaler_99 | 2016-01-17] 1 x HP SAS3042-EL (LSI 1064, PCI-E) 4 x SAS adapter (note: 2TB drive support), with breakout cables
  • [Whaler_99 | 2016-01-17] 6 x 4GB DDR3 Registered ECC VLP LR-DIMMs

 

Link to comment

Pickup only - shipping most of this stuff will be fairly costly.

 

All gear is free - I was going to sell them but got lazy.  Donations of pizza and beer money accepted!  ;D

  • Gear worked as of the point I stopped using them
  • Items will get crossed off as they're claimed
  • I won't reserve anything for more than a week for anyone

 

The freebies:

  • 3 x 3U SGI Rackable 16+2 bay hot swap chassis w/ 550W redundant PSU
  • 2 x Chenbro 12803 28-port SAS Expander
  • 2 x Foundry EdgeIron 24G 24-port gigabit switch
  • 2 x Brocade Silkworm 3800 16-port 2Gb fibre-channel switch

 

Also available:

  • 3 x 2Gb fibre-channel adapters (PCI-X)
  • 3 x 2Gb Infiniband adapters (PCI-X)
  • 1 x IBM ServeRAID BR10i 8 x SAS adapter (note: 2TB drive support limit), maybe with cables if I can find them
  • 1 x IBM something or the 4 x SAS adapter (note: 2TB drive support), maybe with cables if i can find them
  • 1 x IBM BladeCentre Chassis + HS21 Server blades

 

Pictures of some of the gear below:

 

3 x SGI Rackable Chassis - Front, 16-bay hot swap, no ears or rails

IMG_0037.png

 

3 x SGI Rackable Chassis - Inside, holds up to E-ATX, fans included + whatever else is inside..

IMG_0038.png

 

3 x SGI Rackable Chassis - Rear, 2-bay hot swap

IMG_0039.png

 

2 x Chenbro 12803 SAS Expanders - will provide 1 x SFF8087-SFF8087 cable with each if I can find them

IMG_0041.png

 

2 x Foundry EdgeIron 24G gigabit switches, ears included

IMG_0042.png

 

2 x Brocade Silkworm 3800 fibre-channel switches, no ears or rails

IMG_0043.png

I will gladly pick up a 24 port switch, both SAS expanders, and 2 of the chassis today if you want
Link to comment
  • 2 weeks later...

Wow not surprised this stuff went quick! :-\  Do you have extra hardware often?

 

Probably every 6 months, but not as much as this round - that was an accumulation after a full home system replacement.  I'll have a couple more cases and gigabit switches to get rid of over summer, but need to upgrade all my drives/ NICs first.

 

I'll open another thread later in the year.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.