gaikokujinkyofusho

Members
  • Posts

    163
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

Recent Profile Visitors

1446 profile views

gaikokujinkyofusho's Achievements

Apprentice

Apprentice (3/14)

3

Reputation

1

Community Answers

  1. nada? Is there some other information I could post? I realize its likely a super noob question but help would be appreciated, maybe I should post on the github issues?
  2. For some reason I cant seem to access the webgui, everytime I try to I get: Unable to connect Firefox can’t establish a connection to the server at localhost:8082. have tried using my lan ip 192.168...:8082 same error. I figured I might be asked about logs and settings so: s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service 00-legacy: starting s6-rc: info: service 00-legacy successfully started s6-rc: info: service fix-attrs successfully started s6-rc: info: service legacy-cont-init: starting cont-init: info: running /etc/cont-init.d/01-envfile cont-init: info: /etc/cont-init.d/01-envfile exited 0 cont-init: info: running /etc/cont-init.d/01-migrations cont-init: info: /etc/cont-init.d/01-migrations exited 0 cont-init: info: running /etc/cont-init.d/02-tamper-check cont-init: info: /etc/cont-init.d/02-tamper-check exited 0 cont-init: info: running /etc/cont-init.d/10-adduser cont-init: info: /etc/cont-init.d/10-adduser exited 0 cont-init: info: running /etc/cont-init.d/30-config cont-init: info: /etc/cont-init.d/30-config exited 0 cont-init: info: running /etc/cont-init.d/90-custom-folders cont-init: info: /etc/cont-init.d/90-custom-folders exited 0 cont-init: info: running /etc/cont-init.d/99-custom-files cont-init: info: /etc/cont-init.d/99-custom-files exited 0 s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting services-up: info: copying legacy longrun qbittorrent (no readiness notification) s6-rc: info: service legacy-services successfully started s6-rc: info: service 99-ci-service-check: starting s6-rc: info: service 99-ci-service-check successfully started [migrations] started [migrations] no migrations found ------------------------------------- _ () | | ___ _ __ | | / __| | | / \ | | \__ \ | | | () | |_| |___/ |_| \__/ Brought to you by linuxserver.io ------------------------------------- To support LSIO projects visit: https://www.linuxserver.io/donate/ ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- [custom-init] no custom files found exiting... [ls.io-init] done. ******** Information ******** To control qBittorrent, access the WebUI at: http://localhost:8082 screen shot of settings attached.
  3. Yes, well one share in particular but yes public shares. I took a look on the share and confirmed, its set to public.
  4. I had to reinstall unraid recently and reinstalled many of the dockers I was runing before, problem is most, but not all, of them are giving me errors when i try to connect to the webUI i get an error, like for the invidious docker: Unable to connect Firefox can’t establish a connection to the server at 192.168.1.129:2690. i get pretty much the same kind of error for the linuxserver qbittorrent docker but then for things like qdirstat and resilio-sync they seem to work? Am really not sure how to resolve this?
  5. I used to be able to connect my kodi box to unraid via SMB but my flash drive went bad (yeah, didnt have a proper backup) so I had to reinstall unraid and now I cant figure how to set it so I can connect to unraid via SMB? I thought it would be settings -> network services -> smb but it seems to have the correct settings? (the defaults, workgroup is "WORKGROUP", smb is enabled... but I cant seem to connect? Are there some other settings I should be checking?
  6. yeah!!!!!! THANK YOU! Yes, the old flash is still in use and I can ssh into my machine and just took a look at the /boot/config folder so hopefully am good. Really appreciate it!
  7. It seems my flash is dying, i tried fixing it on a win box but scan disk (or whatever its called) said the flash was fine. I am not able to access the web interface, when I try to login in I get: Warning: session_write_close(): write failed: No space left on device (28) in /usr/local/emhttp/login.php on line 96 Warning: session_write_close(): Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/lib/php) in /usr/local/emhttp/login.php on line 96 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/emhttp/login.php:96) in /usr/local/emhttp/login.php on line 98 So I used the unraid flash disk utility to write an image to a new flash (64gb, it warns me but continues) but its unclear to me if i can get the config dir and my old key from within an ssh session or not? I have been scared to shutdown my computer fearing I would not be able to boot unraid again or read the flash drive so wanted to at least see if i can copy those via an ssh session first before shutting down the server and copying those files locally. The error seems to indicate I am our of space, it was a 16gb flash and the unraid flash utility says unraid only takes up 1gig ... so? thoughts?
  8. Thanks. Doing it over again is fine with me, but I agree with matthew_k, it would be nice to have it a bit more automated.
  9. I followed the directions and everything went well until I think I botched things slightly. The copy finished, and then I got confused about which physicial drive (didnt heed that part of the directions) and disconnected the wrong drive, when i turned it back on i saw the mistake and didnt think much of it, I turned the computer back on and reconnected the drive. The catch is that now I get an error about the wrong parity disk (I select the newly copied 12tb drive as the new parity disk) unless I select the old parity disk as a data drive at which point its giving me the copy option again (which just finished after running for about 40hrs). Do I need to run copy again? I can, its not a big deal but I just dont want to loose any data
  10. One of the smaller 6tb drives in my array just failed (one of the main reasons I have unraid!). The thing is its small and my parity drive is 8tb but as i understand it none of the array drives can be larger than the parity drive? If that is the case, in planning for the future I wanted to add a 12tb drive as my parity drive, and take that 8tb drive and use that as the replacement for the dead 6tb drive. So if I add the 12tb drive as a second parity drive, rebuild or mirror (or whatever its called) the parity drive, then once that is complete take the 8tb drive and put it in place of the dead 6tb drive I should be good? right? (of course I am not sure about this hence my posting, what are the risks, are my assumptions incorrect etc). Thanks!
  11. That would be great! Thank you (again!)
  12. Yay! Thank you for this! Question though, is there a way to use the cli version? I tried opening a terminal and it seems that the cli usage of it is actually a separate program? I had assumed that it would just be a cli with a gui interface separate? I tried wgetting it from https://github.com/qarmin/czkawka/releases/download/2.3.0/linux_czkawka_cli into the docker which worked except it didnt as when i try to run it, well here: /tmp # chmod 755 linux_czkawka_cli /tmp # ls linux_czkawka_cli nginx run /tmp # ./linux_czkawka_cli sh: ./linux_czkawka_cli: not found /tmp # linux_czkawka_cli --help sh: linux_czkawka_cli: not found /tmp # ./linux_czkawka_cli --help sh: ./linux_czkawka_cli: not found The reason I ask is I wanted to automate a few things and the cli interface is perfect for that. Regardless, thanks for this! I have been waiting for either Czkawka or some other prog that I could run via docker that can detect similar graphics! Cheers