twok

Well.... I've skipped reboot after some update of the lastest. now when I finally did a reboot (because of some auto-start/ mods to pci-e pass) I got stuck.... and if I wouldn't have found this thread and the recommendation of: Try http://192.168.1.223/login in your browser's private/incognito mode. I would have lost the rest of my sanity. Thanks. P.s - this should go to release/ update notes

+1 to this request. pure curiosity. Tried myself didn't manage yet. Anyone successful, yet?

Hi, I've one docker container that somehow often fails to restart after e.g. stop for backup. However, if manually initiated it, it works. Always. I tried checking logs etc but couldn't find a solution. Then I remembered that User Scripts is able to use "restart" command to start a docker container and I could configure it to run every now and then. However, I don't want it to restart if the status is already running. How can I add something like "if status = active, idle, else star/restart dockercontainer. Can someone please help me to find those commands if possible or point me to script documentation? Or do I need to look at docker commands? Ofc. I tried searching the forums beforehand but couldn't find a solution or similar case yet. If I missed it, feel free to point me to it. Thanks

Hi, I've one docker container that somehow often fails to restart after e.g. stop for backup. However, if manually initiated it, it works. Always. I tried checking logs etc but couldn't find a solution. Then I remembered that User Scripts is able to use "restart" command to start a docker container and I could configure it to run every now and then. However, I don't want it to restart if the status is already running. How can I add something like "if status = active, idle, else star/restart dockercontainer. Can someone please help me to find those commands if possible or point me to script documentation? Or do I need to look at docker commands? Ofc. I tried searching the forums beforehand but couldn't find a solution or similar case yet. If I missed it, feel free to point me to it. Thanks.

rewatched: Solution was in my stupidiy. I installed W10 with UEFI and that's incompatible with SeaBIOS. ❤️ Spaceinvader, again... min 13:09

edit: after neither helped, i started from scratch. attached the drives using /dev/disk/by-id/ method also set them there to be SATA mode checked boot mode and again, nothing... error on screen is the same logs and xml reattached. am I to blind to see something or did it get even more complicated since 2018... W10New-XML.txt logs.txt

Dear all, struggling on starting VMs with M2 passthroughs. New Mainboard/ CPU... Tried with vfio-pci.ids= the IDs from IOMMU groups as well as with manual and /dev/disk/by-id/... same results, over and over. also tried various combinations of bios/ machine setups, following spaceinvader's videos (<3) system M/B: ASRock B450 Pro4 Version - s/n: M80-B7015500143 BIOS: American Megatrends Inc. Version P3.60. Dated: 07/31/2019 CPU: AMD Ryzen 7 2700X Eight-Core @ 3700 MHz HVM: Enabled IOMMU: Enabled Unraid Version: 6.8.3 Graphics-card excluded for testing but same issues if set instead of VNC AMD Radeon XFX RX 5700 XT III with custom bios XFX.RX5700XT.8192.190906_1.rom attached the iommu groups, vm xml as well as current diagnostics. Thankful for any assistance/ hints provided. Cheers, Matt IOMMU Groups.txt twoktower-diagnostics-20200414-1448.zip W10-m2pass-vncOnly.txt

Dear follower unRaiders looking for someone who can help me figure out what to do/ what to choose. my old system is due for requirement. Some components like the GTX 970 sadly produce more and more errors and will only be used for folding or such in future. The other parts will be gifted to a friend. 1 Intel Core i7-4790K, 4x 4.00GHz, boxed (BX80646I74790K) 2 Corsair Vengeance LP schwarz DIMM Kit 16GB, DDR3-1600, CL9-9-9-24 (CML16GX3M2A1600C9) 1 ASUS Strix GeForce GTX 970 OC, STRIX-GTX970-DC2OC-4GD5, 4GB GDDR5, 2x DVI, HDMI, DP (90YV07F0-M0NA00) 1 Gigabyte GA-Z97X-UD5H-BK Black Edition 1 be quiet! Dark Rock Pro 3 (BK019) 1 be quiet! Silent Base 800 orange, schallgedämmt (BG001) 1 be quiet! Straight Power 10 CM 500W ATX 2.4 (E10-CM-500W/BN234) for new build I have the following list at hand: 1 Western Digital WD Black SN750 NVMe SSD 2TB, M.2, Kühlkörper (WDS200T3XHC-00SJG0/WDBGMP0020BNC-WRSN) 1 AMD Ryzen 9 3900X, 12x 3.80GHz, boxed (100-100000023BOX) 2 G.Skill Trident Z silber/rot DIMM Kit 32GB, DDR4-3600, CL17-19-19-39 (F4-3600C17D-32GTZ) 1 Gigabyte GeForce RTX 2080 SUPER Gaming OC 8G [Rev 2.0], 8GB GDDR6, HDMI, 3x DP, USB-C (GV-N208SGAMING OC-8GC) 1 ASUS ROG Strix X570-E Gaming (90MB1150-M0EAY0) 1 be quiet! Dark Rock Pro 4 (BK022) 1 be quiet! Dark Base 900 orange, schallgedämmt (BG010) 1 be quiet! Straight Power 11 Platinum 750W ATX 2.51 (BN307) I have quite strong bounding with beQuite devices because they never failed me. So note that here overpaying is within "reason". As for usage: 2 VMs - Windows / Ubuntu with mostly the Windows being active -- the Windows VM should receive the 2080 + m2 as passthrough for best performance (Gaming /VR) Dockers - Plex, Coachpotate and Co, Nextcloud and some more special like Jira / Confluence server Raid itself will remain with 4x Seagte Archive 10 TB + 2x 512 Corsair SSD Cache System should be ready for future with possibility to expend both on Disks but also VMs/ Docker. My concerns are mostly regarding current passthrough options / limitations and therefore maybe alternative Mainboards, CPU or GPU could be needed. Gracious for any comment you are willing to share. Cheers, Matt

thank you so much! I thought with multiple dockers (jira + jira service desk) using the same port, I would need to go thru the external port. boy was I wrong. such a simple solution. thanks again!

@Gobs please try/ check the following things (helped me) is plex also changed to be in the proxynet network? is the docker container of plex really called "plex" or maybe changed? is your firewall configured to allow the port to be accessed from external? (check with sites like "is my port open") check if logged in to duckdns if your external ip is correctly upgraded

I've changed the default port to 8020 (sorry should have noted it) - full configuration attached. Proxynet beeing the letsencrypt network. As per spaceinvador1 guide. In Jira I've adjusted the base url to match the config. Previously I got it working using the jwilder letsencrypt nginx proxy. however with that I couldn't get nextcloud to work which is a higher priority to me. thanks.

hello, I've setup letsencrypt with subdomain for nextcloud successfull, however I don't get how to set it up for not included applications. e.g. I would like to host my own Jira (Atlassian) instance for myself. This is what I did: server { listen 443 ssl; server_name jira.*; include /config/nginx/ssl.conf; client_max_body_size 0; # enable for ldap auth, fill in ldap details in ldap.conf #include /config/nginx/ldap.conf; location / { # enable the next two lines for http auth #auth_basic "Restricted"; #auth_basic_user_file /config/nginx/.htpasswd; # enable the next two lines for ldap auth #auth_request /auth; #error_page 401 =200 /login; include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_jira jira; proxy_pass http://$upstream_jira:8020; } } However when accessing it I get an 502 error. However the certificates are created so I'm sure it's liked to the subdomain file. Maybe someone can help me figure it out. Thanks, Matt

solved .... I tried to access the WebUI using a VM that had it's NIC set to Virt0 not Eth0. Adjusted it and now it's accessible.

looks like your eth0 is not set to bridge. there is a comment about that from page 1 or 2.

tried to setup as in Video and comments - still can't access the WebUI (ERR_CONNECTION_TIMED_OUT). log looks okay to me. config as default as possible - only as main dns 1.1.1. (cloudflare) and timezone changed to Berlin for close match. tried with unraid OS 6.4. / 6.5.1 rc6 + 6.5.1 and blank / new docker image. with same results. eth0 is set to bridge (br0) and used in config unraidIP = 192.168.178.99 br0 of pihole as well as variable in config is set to = 192.168.178.2 any hint / comment will be highly appreciated. ErrorWarningSystemArrayLogin [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] 01-resolver-resolv: applying... [fix-attrs.d] 01-resolver-resolv: exited 0. [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 20-start.sh: executing... ARCH=amd64 BASH=/bin/bash BASHOPTS=cmdhist:complete_fullquote:extquote:force_fignore:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="0") BASH_SOURCE=([0]="/var/run/s6/etc/cont-init.d/20-start.sh") BASH_VERSINFO=([0]="4" [1]="4" [2]="12" [3]="1" [4]="release" [5]="x86_64-pc-linux-gnu") BASH_VERSION='4.4.12(1)-release' CWD=/ DIRSTACK=() DNS1=1.1.1.1 DNS2=8.8.8.8 DNSMASQ_LISTENING=all EUID=0 FTL_CMD=no-daemon ) HOME=/root HOSTNAME=0237214d32ba HOSTTYPE=x86_64 HOST_OS=unRAID IFS=$' \t\n' INTERFACE=br0 IPv6=False MACHTYPE=x86_64-pc-linux-gnu OPTERR=1 OPTIND=1 OSTYPE=linux-gnu PATH=/opt/pihole:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin PHP_ENV_CONFIG=/etc/lighttpd/conf-enabled/15-fastcgi-php.conf PHP_ERROR_LOG=/var/log/lighttpd/error.log PIHOLE_INSTALL=/tmp/ph_install.sh PPID=209 PS4='+ ' PWD=/ S6OVERLAY_RELEASE=https://github.com/just-containers/s6-overlay/releases/download/v1.21.2.2/s6-overlay-amd64.tar.gz S6_KEEP_ENV=1 SHELL=/bin/bash SHELLOPTS=braceexpand:hashall:interactive-comments SHLVL=1 ServerIP=192.168.178.2 TAG=debian TCP_PORT_53=53 TCP_PORT_80=80 b TZ=Europe/Berlin UDP_PORT_53=53 UID=0 WEBPASSWORD=admin _=bash setupVars=/etc/pihole/setupVars.conf ::: Starting docker specific setup for docker diginc/pi-hole + [[ admin == '' ]] + pihole -a -p admin admin [✓] New password set Using custom DNS servers: 1.1.1.1 & 8.8.8.8 DNSMasq binding to custom interface: br0 Added ENV to php: "PHP_ERROR_LOG" => "/var/log/lighttpd/error.log", "ServerIP" => "192.168.178.2", "VIRTUAL_HOST" => "192.168.178.2", Using IPv4 dnsmasq: syntax check OK. ::: Testing DNSmasq config: ::: Testing lighttpd config: Syntax OK ::: All config checks passed, starting ... ::: Docker start setup complete [i] Neutrino emissions detected... [i] Target: raw.githubusercontent.com (hosts) [i] Target: mirror1.malwaredomains.com (justdomains) [i] Target: sysctl.org (hosts) [i] Target: zeustracker.abuse.ch (blocklist.php?download=domainblocklist) [i] Target: s3.amazonaws.com (simple_tracking.txt) [i] Target: s3.amazonaws.com (simple_ad.txt) [i] Target: hosts-file.net (ad_servers.txt) [i] Number of domains being pulled in by gravity: 144878 [i] Number of unique domains trapped in the Event Horizon: 121904 [i] Nothing to whitelist! pihole-FTL: no process found [✓] DNS service is running [✓] Pi-hole blocking is Enabled [cont-init.d] 20-start.sh: exited 0. [cont-init.d] done. [services.d] starting services Starting dnsmasq [services.d] done. Starting crond Starting lighttpd Starting pihole-FTL (no-daemon) dnsmasq: started, version 2.76 cachesize 10000 dnsmasq: compile time options: IPv6 GNU-getopt DBus i18n IDN DHCP DHCPv6 no-Lua TFTP conntrack ipset auth DNSSEC loop-detect inotify dnsmasq: using nameserver 8.8.8.8#53 dnsmasq: using nameserver 1.1.1.1#53 dnsmasq: read /etc/hosts - 7 addresses dnsmasq: read /etc/pihole/local.list - 2 addresses dnsmasq: failed to load names from /etc/pihole/black.list: No such file or directory dnsmasq: read /etc/pihole/gravity.list - 121904 addresses dnsmasq: 1 127.0.0.1/49609 query[A] pi.hole from 127.0.0.1 dnsmasq: 1 127.0.0.1/49609 /etc/pihole/local.list pi.hole is 192.168.178.2 dnsmasq: 2 127.0.0.1/53311 query[A] pi.hole from 127.0.0.1 dnsmasq: 2 127.0.0.1/53311 /etc/pihole/local.list pi.hole is 192.168.178.2