levster

Members
  • Posts

    565
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

levster's Achievements

Enthusiast

Enthusiast (6/14)

3

Reputation

  1. Can unBalanced be open remotely, through the unraid connect server management?
  2. It looks like the controller card in the description, but if you put it into your cart, the image changes to a break out cable. So, maybe a surprise in what they are actually going to be sending.
  3. Got it. I am rebuilding that drive now and have ordered a new case. I checked all of the cables in this one, Norco RPC 4224, and everything was solid. Perhaps the backplanes are going. I already lost one of the 24 connectors several years ago. Not sure how or why.
  4. I posted in another thread. That drive is now replacing a failed drive. Something is up with my system... tower-diagnostics-20240209-1805.zip
  5. My disk1 just threw this error. Can someone please tell me what's the next logical step? I am attaching a new Diagnostics and one from earlier this AM that I ran for something unrelated. tower-diagnostics-20240209-1805.zip Old - tower-diagnostics-20240209-0901.zip
  6. Hope that his helps. I am running another preclear phase on that disk (sdp). tower-diagnostics-20240209-0901.zip
  7. Can some one please tell me what this error means: Feb 7 15:43:43 Tower kernel: sd 10:0:4:0: [sdp] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) Feb 7 15:43:43 Tower kernel: sd 10:0:4:0: [sdp] 4096-byte physical blocks Feb 7 15:43:43 Tower kernel: sd 10:0:4:0: [sdp] Write Protect is off Feb 7 15:43:43 Tower kernel: sd 10:0:4:0: [sdp] Mode Sense: 7f 00 10 08 Feb 7 15:43:43 Tower kernel: sd 10:0:4:0: [sdp] Write cache: enabled, read cache: enabled, supports DPO and FUA Feb 7 15:43:43 Tower kernel: sdp: sdp1 Feb 7 15:43:43 Tower kernel: sd 10:0:4:0: [sdp] Attached SCSI disk Feb 7 15:44:05 Tower emhttpd: ST6000DM003-2CY186_ZCT17EZJ (sdp) 512 11721045168 Feb 7 15:44:05 Tower emhttpd: read SMART /dev/sdp Feb 7 15:44:50 Tower kernel: sd 10:0:4:0: [sdp] Synchronizing SCSI cache Feb 7 15:44:50 Tower kernel: sd 10:0:4:0: [sdp] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=DRIVER_OK Feb 7 15:48:46 Tower kernel: sd 10:0:7:0: [sdp] 27344764928 512-byte logical blocks: (14.0 TB/12.7 TiB) Feb 7 15:48:46 Tower kernel: sd 10:0:7:0: [sdp] 4096-byte physical blocks Feb 7 15:48:46 Tower kernel: sd 10:0:7:0: [sdp] Write Protect is off Feb 7 15:48:46 Tower kernel: sd 10:0:7:0: [sdp] Mode Sense: 7f 00 10 08 Feb 7 15:48:46 Tower kernel: sd 10:0:7:0: [sdp] Write cache: enabled, read cache: enabled, supports DPO and FUA Feb 7 15:48:46 Tower kernel: sdp: sdp1 Feb 7 15:48:46 Tower kernel: sd 10:0:7:0: [sdp] Attached SCSI disk Feb 7 15:48:47 Tower unassigned.devices: Partition '/dev/sdp1' does not have a file system and cannot be mounted. Feb 7 15:48:47 Tower emhttpd: WDC_WUH721414ALE6L1_Y5KVDTSC (sdp) 512 27344764928 Feb 7 15:48:49 Tower emhttpd: read SMART /dev/sdp Feb 7 15:49:54 Tower emhttpd: WDC_WUH721414ALE6L1_Y5KVDTSC (sdp) 512 27344764928 Feb 7 15:49:56 Tower emhttpd: read SMART /dev/sdp Feb 7 15:50:28 Tower unassigned.devices: Partition '/dev/sdp1' does not have a file system and cannot be mounted. Feb 7 16:34:56 Tower emhttpd: spinning down /dev/sdp Feb 8 07:46:07 Tower emhttpd: read SMART /dev/sdp Feb 8 08:30:59 Tower emhttpd: spinning down /dev/sdp Feb 8 22:46:28 Tower emhttpd: read SMART /dev/sdp Feb 8 23:31:22 Tower emhttpd: spinning down /dev/sdp
  8. Sorry for the noob question - do these cards work natively or need to be flashed, like the PERC h310? Also, what card is recommended for a backplane that has SFF-8643 connector? 24 - bay.
  9. Recently I think that some of my backplane connections went bad. Therefore, I'm considering moving my setup from a Norco 4224, running off of two Dell perc h310 cards to something like a Supermicro 846 or a 847 case. I have a Gigabyte Z790 AORUS ELITE AX DDR4 with two of those perc cards. If I move my setup, including the motherboard which SAS2 controller cards should I consider?
  10. Oh, I see. I just added the space between the 0 and 3. Let's see what happens. Than you very much! Lev
  11. As it is now, it is 03*** What should it be?
  12. Here is the screen shoot of the scripts. I attached the two scrpits. vm settings backup.txt Unraid Auto Dataset Watcher & Converter.txt
  13. I am noticing the same message in the log: Can someone please shed some light on this? Thanks, Lev