luca2

Members
  • Posts

    657
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

Recent Profile Visitors

3977 profile views

luca2's Achievements

Enthusiast

Enthusiast (6/14)

10

Reputation

  1. Hi, everything seems to be working. I checked the supervisord.log and there is no error message. How can I check for the upload?
  2. Hi, I am running this docker with PIA (openvpn) and I can download torrents but I cannot upload. I guess it has to do with my router blocking the uploads. There are ports 58846, 58946, 8112 and 8118 from app to host as shown in the docker tab. Can anyone explain how they actually work? I guess I need to add some rules to my firewall to let a port be forwarded to the wan (which one?). Hope someone can help me out.
  3. Hi, I am planning to format an external hdd as ntfs so that it can be used with Windows. I want to encrypt it with bitlocker. Will this setup work with UD?
  4. It was a working plus license. I did not receive any message of it being blacklisted till now. Will contact Unraid. Thx.
  5. Hi, I tried to replace my key to a new usb stick and got this error. Pls let me know how to solve it. Rgds
  6. I replay to myself as I think it is easier this way to explain what I realised. It may make more sense after that. I attached the content of lab-network.xml (corresponds to virbr1 I am trying to set up) which contains this error: the IP network 192.168.122.0 I posted is the same as virbr0 (the one that is already provided by default by Unraid for virbr0). I then changed it to a new not used network: 192.168.133.0 and this is what I get after asking virsh # net-dumpxml lab-network: <network ipv6='yes'> <name>lab-network</name> <uuid>e00fd28e-5bfc-4e83-8163-0c17e34562ae</uuid> <bridge name='virbr1' stp='on' delay='0'/> <mac address='52:54:00:05:a0:07'/> </network> Still virbr1 is not up and running as virbr0. I pinged 192.168.133.1 from host and there is no answer. So I thought maybe someone can tell me how virbr0 is defined and where is the config file stored ... and from there I could solve my problem with virbr1.
  7. Hi, I read this content which contains a lot of usefull info. But there are still some issues and I hope someone can help me out. https://wiki.unraid.net/Manual/VM_Management#Configure_a_Network_Bridge Start point: I want to create a virtual network for testing vm´s that should be completely isolated from the host and from other vm´s in br0 / virbr0 / any vlan´s / dockers and from any host's network file sharing protocols running. But it should connect to internet. It should still need to connect to internet. I basically want a test-environment. I haven´t changed anything at the router. Following Bastl´s @bastl approach helped by @ken-ji I managed to create a new virtual nic (virbr1 called lab-network). The only thing I am not able to reproduce is to get access to internet. lab-network.xml: <network> <name>lab-network</name> <bridge name="virbr1"/> <forward mode="nat"/> <ip address="192.168.122.1" netmask="255.255.255.0"> <dhcp> <range start="192.168.122.2" end="192.168.122.254"/> </dhcp> </ip> <ip family="ipv6" address="2001:db8:ca2:2::1" prefix="64"/> </network> virsh # net-list Name State Autostart Persistent ------------------------------------------------ default active yes yes lab-network active yes yes Default (does provide internet access): virsh # net-dumpxml default <network> <name>default</name> <uuid>db01278f-bf88-44da-43d4-e0b4eb46f456</uuid> <forward mode='nat'> <nat> <port start='1024' end='65535'/> </nat> </forward> <bridge name='virbr0' stp='on' delay='0'/> <mac address='52:54:00:72:08:e9'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254'/> </dhcp> </ip> </network> Lab-network: <network ipv6='yes'> <name>lab-network</name> <uuid>e00fd28e-5bfc-4e83-8163-0c17e34562ae</uuid> <bridge name='virbr1' stp='on' delay='0'/> <mac address='52:54:00:05:a0:07'/> </network> What I am missing? Rgds
  8. Hi, I was not sure where to post this question. My goal is to setup vm´s that are completely isolated from other vm´s and the host. I have been resarching but do not want to start messing up in my unraid server with instructions from other OS´s/Sytems. I have read it can be done passing through a network card (I do not have free pci slots now for this) or setting up vlans (a managed switch is required; I own one but need to figure out how this can be done). Would like to hear from someone who has done or is running such a setup what is the easiest approach to this. And if you could suggest some reading (article/web) where the logic is explained would be great. Rgds
  9. Can I copy the go file from another Unraid server? Rgds
  10. Hi, Is there any procedure I should follow to test an unraid system (flash) and all the data stored in the shares and check if the hacker put anything malicious in it? The user got attacked by a hacker who got unlimited access to the system (a desktop connected to unraid) for 1 hour. I already powered off + reset the router, formatted a different desktop in the network, tested the usb(unraid) for viruses and connected this desktop to unraid again. No other pc´s are connected to unraid. Any thoughts are welcome. Rgds.
  11. Hi, After reading some posts about this topic I could not find anything specific for a 5900x. I want to assign 8 cores to a vm. Just curious if anyone has done this before and can share with me his experience. This are the core pairs: I guess they are paired like this because they are the SMT pairs, right? After further reading I found this: "The 12-core Ryzen 9 5900X and 16-core Ryzen 9 5950X are parts that have two 8-core CCDs besides the cIOD. The 5900X is carved out by disabling any two cores per CCD"... Can I assume that 1 CCD has cores 0-11 and the second CCD has 12-23? Rgds
  12. Hi, I am succesfully running several windows vm´s with the provided templates. I recently found a problem running a called Valorant, that uses an anti- cheat-engine that makes a lot of trouble. It is not an Unraid problem, but I would like to find a solution for this, since I saw a video of someone solving it running kmv+amd He mentions he enabled this: options kvm ignore_msrs=1 options kvm report_ignored_msrs=0 options kvm_amd npt=1 avic=1 I was wondering if this can be implemented without any impact on the other vm´s? Where should this be placed .. in the Flash>Syslinux configuration? Anything I should change in my actual xml (I attach the one this guy in YT posted and my xml)? In case you need any other data pls let me know. I am running on 6.10.0-rc2. Rgds myXML youtubeXML
  13. Hi, sorry for delay, but could not test it till yesterday. You are right, this is exactly what happened. I ran a third parity check and it showed no errors. I don´t know why I had an unclean shutdown. Sometimes the server just cannot shutdown, so I have to do a hard reset. Usually it has to when I have been messing up editing the xml of the vm´s. Thx another time for support! Have a nice day.