JorgeB

Moderators
  • Posts

    60370
  • Joined

  • Last visited

  • Days Won

    630

JorgeB last won the day on March 25

JorgeB had the most liked content!

About JorgeB

Retained

  • Member Title
    On vacation, back in a week or so

Converted

  • Gender
    Male

Recent Profile Visitors

43858 profile views

JorgeB's Achievements

Grand Master

Grand Master (14/14)

7.4k

Reputation

3.1k

Community Answers

  1. That doesn't look normal, but not sure if it's a problem.
  2. They are rated up to 500MB/s, they cannot sustain that speed for writes, though it should be faster than what you are seeing, but one or both could be failing.
  3. Pre-reboot would be better, but these allow to check SMART for both disks, which does not look great, but most data should still be salvageable, re-sync parity and see if you get any errors from both disks.
  4. If you really need macvlan, you can still use, as long as bridging is disabled.
  5. Please post the current diagnostics.
  6. That looks like a flash drive problem, you can try recreating it first, if the same replace the flash drive.
  7. Most likely the ticket did not get created, did you get an automated reply back? If you didn't, use the contact form to contact support again until you get a reply.
  8. If it's still missing after downgrading, the upgrade wasn't the problem, do you know to which controller the device is connected to?
  9. The GPU driver is usually required for GUI mode, it's not for non GUI mode.
  10. Nope, only if you do a new config and assign a temporary device to the array.
  11. That doesn't look like the typical macvlan call trace, but retest with ipvlan, also enable the syslog server, to see if it catches anything else.
  12. That suggest it's working as USB 2.0, try different ports/cables.
  13. I don't see the S3 plugin installed, S3 sleep should not work on a stock install, do you remember changing anything to enable that? Also post new diags after a reboot, since they are incomplete.
  14. Historical devices are from the UD plugin, and yes, you can delete them.
  15. Same as this, see there for more info: https://forums.unraid.net/bug-reports/stable-releases/6129-disks-missing-after-upgrading-to-6129-r2922/