[SOLVED] Syslog/Smart status errors


Recommended Posts

I'm new to unRAID and just built my first server. I started preclearing my disks for several cycles last night and this morning my log showed some new errors. It looks like its from my sde drive. should I be worried? I've attached my syslog and also posted the SMART statue of sde. Running 4.7 Pro

 

May 17 02:35:20 Tower kernel: ata6.00: exception Emask 0x50 SAct 0x7fffffbf SErr 0x400800 action 0x6 frozen (Errors)
May 17 02:35:20 Tower kernel: ata6.00: irq_stat 0x08000000, interface fatal error (Errors)
May 17 02:35:20 Tower kernel: ata6: SError: { HostInt Handshk } (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6: hard resetting link (Minor Issues)

 

I also found these but I think they can be ignored:

May 16 16:25:33 Tower kernel: ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557) (Minor Issues)
May 16 16:25:33 Tower kernel: ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND (Minor Issues)
May 16 16:25:33 Tower kernel: ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14760c8), AE_NOT_FOUND (Minor Issues)
May 16 16:25:33 Tower kernel: ACPI Warning: Incorrect checksum in table [OEMB] - A0, should be 9F (20090903/tbutils-314) (Minor Issues)
May 16 16:25:33 Tower kernel: scst: ***WARNING***: Patch io_context was not applied on your kernel. SCST will be working with not the best performance. (Minor Issues)
May 16 16:25:33 Tower kernel: WARNING: at fs/proc/generic.c:590 proc_register+0x11c/0x14b() (Minor Issues)
May 16 16:25:33 Tower kernel: Pid: 766, comm: modprobe Not tainted 2.6.32.9-unRAID #8 (Errors)
May 16 16:25:33 Tower kernel: Call Trace: (Errors)
May 16 16:25:33 Tower kernel:  [<c102449e>] warn_slowpath_common+0x60/0x77 (Errors)
May 16 16:25:33 Tower kernel:  [<c10244e9>] warn_slowpath_fmt+0x24/0x27 (Errors)
May 16 16:25:33 Tower kernel:  [<c109cf0e>] proc_register+0x11c/0x14b (Errors)
May 16 16:25:33 Tower kernel:  [<c109d0cc>] proc_mkdir_mode+0x2f/0x43 (Errors)
May 16 16:25:33 Tower kernel:  [<c109d0ef>] proc_mkdir+0xf/0x11 (Errors)
May 16 16:25:33 Tower kernel:  [<f8462d5d>] mvst_init+0x3b/0x5b [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<f8467895>] mvs_pci_init+0xaa5/0xaf7 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<c10062d9>] ? dma_generic_alloc_coherent+0x0/0xdb (Errors)
May 16 16:25:33 Tower kernel:  [<c1142050>] local_pci_probe+0xe/0x10 (Errors)
May 16 16:25:33 Tower kernel:  [<c11426ad>] pci_device_probe+0x48/0x66 (Errors)
May 16 16:25:33 Tower kernel:  [<c1194956>] driver_probe_device+0x79/0xed (Errors)
May 16 16:25:33 Tower kernel:  [<c1194a0d>] __driver_attach+0x43/0x5f (Errors)
May 16 16:25:33 Tower kernel:  [<c11940a7>] bus_for_each_dev+0x39/0x5a (Errors)
May 16 16:25:33 Tower kernel:  [<f846f000>] ? mvs_init+0x0/0x45 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<c119482f>] driver_attach+0x14/0x16 (Errors)
May 16 16:25:33 Tower kernel:  [<c11949ca>] ? __driver_attach+0x0/0x5f (Errors)
May 16 16:25:33 Tower kernel:  [<c119451c>] bus_add_driver+0x9f/0x1c5 (Errors)
May 16 16:25:33 Tower kernel:  [<f846f000>] ? mvs_init+0x0/0x45 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<c1194ccf>] driver_register+0x7b/0xd7 (Errors)
May 16 16:25:33 Tower kernel:  [<f846f000>] ? mvs_init+0x0/0x45 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<c1142882>] __pci_register_driver+0x39/0x8c (Errors)
May 16 16:25:33 Tower kernel:  [<f846f000>] ? mvs_init+0x0/0x45 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<f846f030>] mvs_init+0x30/0x45 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<c1001139>] do_one_initcall+0x4c/0x131 (Errors)
May 16 16:25:33 Tower kernel:  [<c1042e6e>] sys_init_module+0xa7/0x1dd (Errors)
May 16 16:25:33 Tower kernel:  [<c1002935>] syscall_call+0x7/0xb (Errors)
May 16 16:25:33 Tower kernel: atiixp 0000:00:14.1: simplex device: DMA disabled (Errors)
May 16 16:25:33 Tower kernel: ide1: DMA disabled (Errors)
May 16 16:25:36 Tower emhttp: shcmd (6): killall -HUP smbd (Minor Issues)

 

 

 

 

syslog-2011-05-17.txt

Link to comment

I decided to check the SMART status of my drive and found 1 to have errors:

SMART status Info for /dev/sde

smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     Hitachi HDS5C3020ALA632
Serial Number:    ML0220F30VX40D
Firmware Version: ML6OA580
User Capacity:    2,000,398,934,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Tue May 17 10:22:05 2011 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
				was suspended by an interrupting command from host.
				Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
				without error or no self-test has ever 
				been run.
Total time to complete Offline 
data collection: 		 (23645) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
				Auto Offline data collection on/off support.
				Suspend Offline collection upon new
				command.
				Offline surface scan supported.
				Self-test supported.
				No Conveyance Self-test supported.
				Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
				power-saving mode.
				Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
				General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 255) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
				SCT Feature Control supported.
				SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
 2 Throughput_Performance  0x0005   132   132   054    Pre-fail  Offline      -       109
 3 Spin_Up_Time            0x0007   100   100   024    Pre-fail  Always       -       328
 4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       7
 5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
 7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
 8 Seek_Time_Performance   0x0005   146   146   020    Pre-fail  Offline      -       29
 9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       87
10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       7
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       7
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       7
194 Temperature_Celsius     0x0002   200   200   000    Old_age   Always       -       30 (Lifetime Min/Max 22/32)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       2

SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 79 hours (3 days + 7 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 84 51 00 80 7e 99 0f

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 61 a0 28 d0 d6 99 40 08      10:08:00.290  WRITE FPDMA QUEUED
 61 00 20 d0 d2 99 40 08      10:08:00.290  WRITE FPDMA QUEUED
 61 00 18 d0 ce 99 40 08      10:08:00.286  WRITE FPDMA QUEUED
 61 00 10 d0 ca 99 40 08      10:08:00.286  WRITE FPDMA QUEUED
 61 00 08 d0 c6 99 40 08      10:08:00.282  WRITE FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 79 hours (3 days + 7 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 84 51 10 70 7f 99 0f

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 61 a0 28 d0 d6 99 40 08      10:08:00.290  WRITE FPDMA QUEUED
 61 00 20 d0 d2 99 40 08      10:08:00.290  WRITE FPDMA QUEUED
 61 00 18 d0 ce 99 40 08      10:08:00.286  WRITE FPDMA QUEUED
 61 00 10 d0 ca 99 40 08      10:08:00.286  WRITE FPDMA QUEUED
 61 00 08 d0 c6 99 40 08      10:08:00.282  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
   1        0        0  Not_testing
   2        0        0  Not_testing
   3        0        0  Not_testing
   4        0        0  Not_testing
   5        0        0  Not_testing
Selective self-test flags (0x0):
 After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Link to comment

Here's the SMART status Info for /dev/sdd

 

smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     ST2000DL003-9VT166
Serial Number:    6YD05AZD
Firmware Version: CC32
User Capacity:    2,000,398,934,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Tue May 17 20:37:29 2011 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
				was completed without error.
				Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
				without error or no self-test has ever 
				been run.
Total time to complete Offline 
data collection: 		 ( 612) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
				Auto Offline data collection on/off support.
				Suspend Offline collection upon new
				command.
				Offline surface scan supported.
				Self-test supported.
				Conveyance Self-test supported.
				Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
				power-saving mode.
				Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
				General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 255) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x30b7)	SCT Status supported.
				SCT Feature Control supported.
				SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   111   099   006    Pre-fail  Always       -       40757696
  3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       4
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       843294
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       28
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       4
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   069   069   045    Old_age   Always       -       31 (Lifetime Min/Max 27/31)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       3
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       4
194 Temperature_Celsius     0x0022   031   040   000    Old_age   Always       -       31 (0 25 0 0)
195 Hardware_ECC_Recovered  0x001a   036   027   000    Old_age   Always       -       40757696
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       273142740156444
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       3060199144
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       2321341914

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.