majestic62 Posted June 24, 2011 Share Posted June 24, 2011 Hey guys I have just started out using unraid and its been great except my onboard lan would only connect at 100mbs which is far to slow so I looked at the compatible list of NIC and the D-Link DGE-528T is listed as working I have installed it turned off the onboard LAN and it lights up at the back off the card but I can not connect to my box with telenet or \\tower and my router does not list it as one off the devices on the lAN. Cheers for any help Link to comment
defected07 Posted June 24, 2011 Share Posted June 24, 2011 If you have a keyboard plugged into the server, and can log in through the console, please paste the output from: ifconfig eth0 ethtool eth0 Thanks Link to comment
majestic62 Posted June 24, 2011 Author Share Posted June 24, 2011 just so know one waste any time on this I am going back to a different setup I had before that seemed to work ok Cheers guys & gals Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.