unRAID Server release 4.3-beta2 available

Download.

Just some bug fixes.  If you are using -beta1, get rid of it and use -beta2 instead 

unRAID Server 4.3-beta2 Release Notes

Upgrade Instructions (Please Read Carefully)
--------------------------------------------
If you are currently running unRAID Server 4.2-beta1 or higher (including 4.2.x 'final'), please copy the following files from the new release to the root of your Flash device:
    bzimage
    bzroot

If you are currently running unRAID server 4.0 or 4.1, please copy the following files from the new release to the root of your Flash device:
    bzimage
    bzroot
    syslinux.cfg
    menu.c32
    memtest

This can be done either by plugging the Flash into your PC or, by copying the files to the 'flash' share on your running server.  The server must then be rebooted.

If you are currently running unRAID Server 3.0-beta1 or higher, please follow these steps to upgrade:

1. Referring to the System Management Utility 'Main' page, make a note of each disks's model/serial number; you will need this information later.

2. Shut down your server, remove the Flash and plug it into your PC.

3. Right-click your Flash device listed under My Computer and select Properties.  Make sure the volume label is set to "UNRAID" (without the quotes) and click OK.  You do NOT need to format the Flash.

4. Copy the files from the new release to the root of your Flash device.

5. Right-click your Flash device listed under My Computer and select Eject.  Remove the Flash, install in your server and power-up.

6. After your server has booted up, the System Management Utility 'Main' page will probably show no devices; this is OK, navigate to the 'Devices' page. Using the model/serial number information gathered in step 1, assign each of your hard drives to the correct disk slot.

7. Go back to the 'Main' page and your devices should appear correctly.  You may now Start the array.


If you are installing this release to a new Flash, please refer to instructions on our website at:

http://www.lime-technology.com/wordpress/?page_id=19


Changes from 4.3-beta1 to 4.3-beta2
-----------------------------------

Bug fix: Restore missing 'installpkg' script.

Bug fix: Fixed possible user share crash if top-level disk directories contain ordinary files.

Bug fix: Fixed warning message generated by 'find' when searching user shares.

Bug fix: Fixed problem reporting correct hostname to DHCP server.