Server Building > Hard Drives and Controllers

Supermicro AOC-SASLP-MV8 with Gigabyte 880ga ud3h

(1/3) > >>

slarco:
Hi, i have a few questions about this card.

I Just got it and im trying to make it work now. I use the PCI x16 slot and i also deactivated the INT13 on the bios setup.

Now im looking to downgrade the bios from .21 to .15 see if that works. So far it's been around 10 mins and im still stuck at the "Loading Operating System" screen


Any ideas or suggestions??

DO i need to put some drivrs somewhere in the pendrive? Im i missing something??

slarco:
Tried on the x4 slot, nothing, same deal.

slarco:
Im trying to downgrade the sas card bios from .21 to .15 as sugested here and i can't acces the bios.

I have the USB drive ready. Do i need to reboot the server as usual?  f10 / f12 doesn't do anything.

I go straight to a initializing controller screen and then get stuck on a black screen with a blinking cursor.

How can i downgrade to .15?  im lost here

joshpond:
Which step are you up to. You have to. Reate the dos usb and boot to that. Make sure the mobo is set to boot to usb and no other hdds are connected. Set the hdd to ide so that you can boot to the us.

Josh

slarco:
By no other Hdds you mean that i have to disconnect all the data / parity / cache drives?

I already have the bootable usb drive with the .15 driver

so what now? disconect all the drives, set the mobo bios to ide instead ahci?

Navigation

[0] Message Index

[#] Next page