Support > User Customizations

Strange problem with sleep and simple features

(1/2) > >>

zirconi:
Ok so i'm trying some tests with the sleep addon of simplefeatures.

If i manually put the server in sleep with the simple features button on the main gui I CAN wake it up without problems from my main pc or from my htpc with xbmc and WOL addon.

If i setup a sleep scheduling with simple features with only these configurations :

Wait for array inactivity:   Yes
Extra delay after array inactivity (minutes):   75
Interval of network / device inactivity (minutes):   5

I CANNOT wake it up from my pc or from my htpc but only pressing the power button on the server.
I tried to set
Set WOL options before sleep:  g

and even ethtool -s eth0 wol g   before and after the sleep  but nothing,i cannot wake the server.

What the hell is happening ? :)

Julian0o:
Do you have some news or a solution?

darkside40:
I think you havn't got an answer because there are some important info's are missing. For example whick Mainboard and NIC you use.

Also a Syslog would be useful.
What software are you using when you try waking up your server? Do you use the correct IP and Mac?

sacretagent:
i am messing myself last few days to put one server to sleep
and had a similar issue
please be sure to enable wake on lan in your bios
on my asus p8h67 it was called power on pcie
but most of the time it is called power on lan or something similar

also be sure you have the right mac address....   :-[
i lost about30 minutes using the wrong mac address :P to wake up the server

anyway of now to search for a solution to let sf sleep let the server sleep even if the cache drive is running but the rest of the array is down ....
crashplan and plex keep my cache drive running and i don't see how to avoid that ....

Julian0o:

--- Quote from: sacretagent on August 07, 2012, 09:22:36 PM ---anyway of now to search for a solution to let sf sleep let the server sleep even if the cache drive is running but the rest of the array is down ....
crashplan and plex keep my cache drive running and i don't see how to avoid that ....

--- End quote ---

Thats the point, please let me know when you have a solution. I will also do!
Its not so cool that the server doesnt go to sleep. if i manually put him into sleep everything works.

EDIT: Im now trying to set the array activity to NO and set the network activity to YES. I dont know if the server counts every bit wich is transfered over the ethernet card. i will inform you how its working.

I have the experience that when my Plex Server is disabled in the unRAID settings. The server doesnt go to sleep and my cache drive is running all the time. dont know why. i have installed istats server and allmost all simpleFeatures plugins.

Navigation

[0] Message Index

[#] Next page