nzbget Posted March 17, 2013 Share Posted March 17, 2013 I'm not an expert but I would try to recompile NZBGet with the magic define. Something like this: export CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=64" ./configure make Link to comment
overbyrn Posted March 17, 2013 Author Share Posted March 17, 2013 I'm not an expert but I would try to recompile NZBGet with the magic define. Something like this: export CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=64" ./configure make Perfect! I wasn't sure if it needed applying globally. This was the exact answer I was hoping for. I am pleased to say that it seems to have worked. I compiled a new version and sucessfully tested on the same dev/test system which previously failed. I repeated similar earlier failed steps documented by DikkieDirk. First I installed to /mnt/disk1/.nzbget (I don't have a cache disk in my test VM). This installed fine. Then I changed MainDir to /mnt/user/Media and this worked also. Directory did not exist before the config change. NZBGet created the directory and all sub-dirs (dst, nzb, queue, tmp). I think that might have fixed it! @ DikkieDirk, can you please test this for me? Here is a link to a test version of the plugin. Please retry your previous failed steps and report back on the results. Test plugin: https://dl.dropbox.com/u/572553/UnRAID/nzbget/nzbget_test.plg Thanks again hugbug. Regards, overbyrn Link to comment
dikkiedirk Posted March 17, 2013 Share Posted March 17, 2013 I went ahead and installed the test version. Unfortunately it hasn't worked for me: info Sun Mar 17 2013 16:16:38 Pausing all activities due to errors in configuration error Sun Mar 17 2013 16:16:38 nzbget.conf(56): Invalid value for option "NzbDir": could not create directory "/mnt/user/Media/nzb/" error Sun Mar 17 2013 16:16:38 nzbget.conf(59): Invalid value for option "QueueDir": could not create directory "/mnt/user/Media/queue/" error Sun Mar 17 2013 16:16:38 nzbget.conf(62): Invalid value for option "TempDir": could not create directory "/mnt/user/Media/tmp/" error Sun Mar 17 2013 16:16:38 nzbget.conf(32): Invalid value for option "DestDir": could not create directory "/mnt/user/Media/dst/" Showing records 1-5 from 5 Link to comment
nzbget Posted March 17, 2013 Share Posted March 17, 2013 overbyrn, can you give dikkiedirk the stat test program? Link to comment
dikkiedirk Posted March 17, 2013 Share Posted March 17, 2013 A little update on my configuration: I now run RC11 in a ESXi VM. nzbget is installed to /mnt/cache/.nzbget mnt/user/Media is a user share. setting Maindir to /mnt/user/Media/nzbgettest also wont create the nzbgettest folder. I also get an incompatible browser error now. I use IE 10. Link to comment
overbyrn Posted March 17, 2013 Author Share Posted March 17, 2013 overbyrn, can you give dikkiedirk the stat test program? Already on it. Currently exchanging PM's. Link to comment
dikkiedirk Posted March 18, 2013 Share Posted March 18, 2013 With the great help of overbyrn I finally succeeded in getting nzbget running. I now have a more general question: How to set up categories. nzbget is installed in /mnt/cache/.nzbget and Maindir is set to /mnt/user/Movies I like to setup categories so that avi, dvd, mkv and bluray get moved to their final destinations: avi to /mnt/user/videos/AVI dvd to /mnt/user/Movies/DVD mkv to /mnt/user/Movies/MKV bluray to /mnt/user/videos/BluRay Must the final destination path be set relative to Destdir or can I set a absolute path? Must I drop the nzb in their specific folder like nzbdir/avi, nzbdir/DVD, nzbdir/mkv and nzbdir/bluray. How does this relate to a set absolute path? Link to comment
neilt0 Posted March 18, 2013 Share Posted March 18, 2013 I like to setup categories so that avi, dvd, mkv and bluray get moved to their final destinations: avi to /mnt/user/videos/AVI dvd to /mnt/user/Movies/DVD mkv to /mnt/user/Movies/MKV bluray to /mnt/user/videos/BluRay Must the final destination path be set relative to Destdir or can I set a absolute path? Must I drop the nzb in their specific folder like nzbdir/avi, nzbdir/DVD, nzbdir/mkv and nzbdir/bluray. How does this relate to a set absolute path? You can set an absolute path. Here are a couple of mine: You can either drop the NZB in to a folder under the nzbdir -- e.g. nzbdir/MKV/ or add it in nzbdir and change the category later. The nzbdir doesn't affect the Destdir path, that's set in the Category section of Settings. Link to comment
nzbget Posted March 19, 2013 Share Posted March 19, 2013 @overbyrn: I wonder about version numbers of the plugin. The common practice for packaging is to use the original version number of the packaged program + package version number. As example see package names in optware or package names in different Linux distributions. In optware there are two packages for NZBGet: Stable: nzbget_9.1-1_arm.ipk Testing: nzbget-testing_10.0-r603-1_arm.ipk Here "9.1" and "10.0-r603" are original version numbers of the program. "1" is the package version. If an error was found in the package and it must be updated without updating the original program, the package number must be increased, for example: nzbget_9.1-2_arm.ipk nzbget_9.1-3_arm.ipk When the program is updated the package number resets to 1: nzbget_10.0-1_arm.ipk Why not use this common naming scheme? Link to comment
dikkiedirk Posted March 19, 2013 Share Posted March 19, 2013 I gonna stick with the personalized "dikkiedirk" test version for a while. I got it with the help of overbyrn (many thanks for the great help). 2 things bug me though: I get an unsupported browser error when open nzbgets webgui in Internet Explorer 10 and Is there a way to add a password to protected downloads like in SABNZND? Link to comment
neilt0 Posted March 19, 2013 Share Posted March 19, 2013 I gonna stick with the personalized "dikkiedirk" test version for a while. I got it with the help of overbyrn (many thanks for the great help). 2 things bug me though: I get an unsupported browser error when open nzbgets webgui in Internet Explorer 10 and Is there a way to add a password to protected downloads like in SABNZND? a) It's 2013. No-one uses IE. b) http://lime-technology.com/forum/index.php?topic=23423.msg216466;topicseen#msg216466 Link to comment
nzbget Posted March 19, 2013 Share Posted March 19, 2013 I get an unsupported browser error when open nzbgets webgui in Internet Explorer 10 IE10 is supported and works without issues. Please post a screenshot with error message. Link to comment
dikkiedirk Posted March 19, 2013 Share Posted March 19, 2013 I gonna stick with the personalized "dikkiedirk" test version for a while. I got it with the help of overbyrn (many thanks for the great help). 2 things bug me though: I get an unsupported browser error when open nzbgets webgui in Internet Explorer 10 and Is there a way to add a password to protected downloads like in SABNZND? a) It's 2013. No-one uses IE. b) http://lime-technology.com/forum/index.php?topic=23423.msg216466;topicseen#msg216466 a) Don't care about that, many I know still use it. Not very helpfull. Link to comment
dikkiedirk Posted March 19, 2013 Share Posted March 19, 2013 I get an unsupported browser error when open nzbgets webgui in Internet Explorer 10 IE10 is supported and works without issues. Please post a screenshot with error message. Sure can, see atachment. Link to comment
overbyrn Posted March 19, 2013 Author Share Posted March 19, 2013 @overbyrn: I wonder about version numbers of the plugin. The common practice for packaging is to use the original version number of the packaged program + package version number. As example see package names in optware or package names in different Linux distributions. In optware there are two packages for NZBGet: Stable: nzbget_9.1-1_arm.ipk Testing: nzbget-testing_10.0-r603-1_arm.ipk Here "9.1" and "10.0-r603" are original version numbers of the program. "1" is the package version. If an error was found in the package and it must be updated without updating the original program, the package number must be increased, for example: nzbget_9.1-2_arm.ipk nzbget_9.1-3_arm.ipk When the program is updated the package number resets to 1: nzbget_10.0-1_arm.ipk Why not use this common naming scheme? Until now I have considered the plugin (not nzbget) to be experimental. With the help of yourself, neilt0 and dikkiedirk, I feel it's a lot more stable. I have today spent some time amending the plugin such that it allows for updating the plugin (from GitHub) and NZBGet from pre-built source. That should let me keep up to date with recent svn changes like r603 and distribute new builds to those running the plugin on UnRAID. I realise there is a common naming convention and I plan to put some thought to using a more standard format. I have to balance common naming against the time and trouble I put in to building from source and maintaining the plugin that wraps around your application for others to use. I'm not a coder by trade. In IT; yes. SAP Netweaver consultant by day. I am not skilled in the ways of bash. I need to come up with a simplish way of versioning that keeps everyone happy. Not there yet but hope to be soon. Regards, overbyrn. Link to comment
nzbget Posted March 19, 2013 Share Posted March 19, 2013 Sure can, see atachment. Just do what the error message suggests: switch compatibility mode off. Detailed instructions and more info on IE10 compatibility mode. If you use IE10 you should know what it is or you may have troubles with many sites. Link to comment
mrow Posted March 20, 2013 Share Posted March 20, 2013 Really would like to switch to NZBGet, however, the sheer number of stuff that I use that integrates with SAB only is really what is holding me back from making the switch. @nzbget: Any thoughts or plans on emulating or incorporating the SAB API so these websites, apps, etc. will work with NZBGet? Link to comment
nzbget Posted March 20, 2013 Share Posted March 20, 2013 Any thoughts or plans on emulating or incorporating the SAB API so these websites, apps, etc. will work with NZBGet? Many nzb-sites use newznab as backend. The newznab team is currently working on adding NZBGet support. When this version is out, all sites based on newznab should be able to provide NZBGet integration. Emulating foreign API is a bad idea. NZBGet has its own rich API. Couchpotato, SickBeard, Headphones have native support for NZBGet. There are smartphone apps to control NZBGet remotely. If you have apps you want to work with NZBGet you should ask app developers to add support for NZBGet. More people ask more chances it happen. Link to comment
dikkiedirk Posted March 20, 2013 Share Posted March 20, 2013 Does nzbget indeed work with sickbeard. I can't get sickbeard installed and running with nzbget installed. sickbeard shows this error message: Warning: parse_ini_file(/boot/config/plugins/sickbeard/sickbeard.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/sickbeard/sickbeard.php on line 2 Link to comment
nzbget Posted March 20, 2013 Share Posted March 20, 2013 @dikkiedirk: What about IE10, does it work now? Link to comment
dikkiedirk Posted March 20, 2013 Share Posted March 20, 2013 @dikkiedirk: What about IE10, does it work now? Yea, thats OK now. Thanks. Link to comment
mrow Posted March 21, 2013 Share Posted March 21, 2013 Any thoughts or plans on emulating or incorporating the SAB API so these websites, apps, etc. will work with NZBGet? Many nzb-sites use newznab as backend. The newznab team is currently working on adding NZBGet support. When this version is out, all sites based on newznab should be able to provide NZBGet integration. Emulating foreign API is a bad idea. NZBGet has its own rich API. Couchpotato, SickBeard, Headphones have native support for NZBGet. There are smartphone apps to control NZBGet remotely. If you have apps you want to work with NZBGet you should ask app developers to add support for NZBGet. More people ask more chances it happen. Unfortunately my go to phone app is no longer being developed. It's a SAB, CP and SB all in one app. I realize at some point it's going to break as APIs change but for now that app alone is enough to keep me using SAB. I also have a Chrome extension that adds a button to send an nzb to SAB for pretty much every nzb site in existence. Hopefully you'll get there eventually though! Link to comment
nzbget Posted March 21, 2013 Share Posted March 21, 2013 I also have a Chrome extension that adds a button to send an nzb to SAB for pretty much every nzb site in existence. Can you please name it? Link to comment
nzbget Posted March 21, 2013 Share Posted March 21, 2013 Does nzbget indeed work with sickbeard. I can't get sickbeard installed and running with nzbget installed. sickbeard shows this error message: Warning: parse_ini_file(/boot/config/plugins/sickbeard/sickbeard.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/sickbeard/sickbeard.php on line 2 The sickbeard installation error has nothing to do with nzbget. Link to comment
dikkiedirk Posted March 21, 2013 Share Posted March 21, 2013 Is there a possibility to temporarily disable a configured usenet server or test connection to a server? I have 3 servers setup for testing dmca takedowns and yesterday I downloaded of a mkv which failed because of missing blocks. I downloaded the mkv in sabnzbd just fine with the same servers configured. Perhaps I filled in a wrong password to one of the servers. Link to comment
Recommended Posts