Poll

Experiencing LZMA Data is Corrupt when booting Unraid from Flashdrive

Assistance
1 (50%)
System Failure
1 (50%)

Total Members Voted: 2

Author Topic: LZMA Data is Corrupt  (Read 1906 times)

Offline rowdy_aussie

  • Member
  • **
  • Posts: 2
LZMA Data is Corrupt
« on: October 31, 2012, 06:25:26 PM »
Hello Support,

I have been using Unraid Pro version 5.0_rc5 AIO for some months with no problems. I recently loaded uNmenu onto my tower and it froze. I rebooted the tower from the USB drive and it loaded up the I received an error message "LZMA Data Is Corrupt"
Are you able to tell me how I recover from this error?

Offline Joe L.

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 18822
Re: LZMA Data is Corrupt
« Reply #1 on: October 31, 2012, 09:50:42 PM »
Hello Support,

I have been using Unraid Pro version 5.0_rc5 AIO for some months with no problems. I recently loaded uNmenu onto my tower and it froze. I rebooted the tower from the USB drive and it loaded up the I received an error message "LZMA Data Is Corrupt"
Are you able to tell me how I recover from this error?
You may have bad memory in your tower (or incorrect voltage, timing, or clock speed on the RAM)

Apparently, your flash drive bzroot or bzimage file cannot be un-compressed and is being detected as corrupt.

Offline rowdy_aussie

  • Member
  • **
  • Posts: 2
Re: LZMA Data is Corrupt
« Reply #2 on: November 06, 2012, 04:36:01 PM »
Thank you for your response with the issue that I am encountering. Is there any way to resolve the problem that I am experiencing?

Offline vca

  • Sr. Member
  • ****
  • Posts: 320
Re: LZMA Data is Corrupt
« Reply #3 on: November 07, 2012, 11:02:02 AM »
Perhaps the flash drive is having problems.  Try putting a fresh copy of the unRAID installation on another flash drive and booting from that.

Regards,

Stephen