mur.616 Posted March 14, 2013 Share Posted March 14, 2013 hi im getting the nobody card disabling IRQ 16 error. it happens about 5 minutes after transferring general or sooner. when it happens write speeds go from 80mb/s to 2-3 mb/s IRQ 16 is a USB port and i have stopped using it. still happens this all started after i had my power supply fail. have had server for about 2 years no problems. i am runnign 5.0 rc11 no add ons anymore here is the system log Quote Link to comment
mur.616 Posted March 14, 2013 Author Share Posted March 14, 2013 when this happens it also kills the parity check speeds. Quote Link to comment
mur.616 Posted March 14, 2013 Author Share Posted March 14, 2013 /usr/bin/tail -f /var/log/syslog Feb 4 18:55:40 Tower kernel: [] ? smp_apic_timer_interrupt+0x72/0x7f Feb 4 18:55:40 Tower kernel: [] ? common_interrupt+0x29/0x30 Feb 4 18:55:40 Tower kernel: [] ? mwait_idle+0x4a/0x50 Feb 4 18:55:40 Tower kernel: [] ? cpu_idle+0x4b/0x65 Feb 4 18:55:40 Tower kernel: [] ? start_secondary+0x9a/0x9c Feb 4 18:55:40 Tower kernel: handlers: Feb 4 18:55:40 Tower kernel: [] usb_hcd_irq Feb 4 18:55:40 Tower kernel: [] usb_hcd_irq Feb 4 18:55:40 Tower kernel: [] ahci_interrupt Feb 4 18:55:40 Tower kernel: Disabling IRQ #16 Quote Link to comment
prostuff1 Posted March 14, 2013 Share Posted March 14, 2013 /usr/bin/tail -f /var/log/syslog Feb 4 18:55:40 Tower kernel: [] ? smp_apic_timer_interrupt+0x72/0x7f Feb 4 18:55:40 Tower kernel: [] ? common_interrupt+0x29/0x30 Feb 4 18:55:40 Tower kernel: [] ? mwait_idle+0x4a/0x50 Feb 4 18:55:40 Tower kernel: [] ? cpu_idle+0x4b/0x65 Feb 4 18:55:40 Tower kernel: [] ? start_secondary+0x9a/0x9c Feb 4 18:55:40 Tower kernel: handlers: Feb 4 18:55:40 Tower kernel: [] usb_hcd_irq Feb 4 18:55:40 Tower kernel: [] usb_hcd_irq Feb 4 18:55:40 Tower kernel: [] ahci_interrupt Feb 4 18:55:40 Tower kernel: Disabling IRQ #16 Run a memtest on the box for at least 8 hours to make sure nothing has gone wonky there, 24 hours would be better. Quote Link to comment
mur.616 Posted March 14, 2013 Author Share Posted March 14, 2013 how would i go about doing that? Quote Link to comment
prostuff1 Posted March 14, 2013 Share Posted March 14, 2013 how would i go about doing that? reboot the machine and when the computer boots there should be a selection to start memtest. Quote Link to comment
mur.616 Posted March 14, 2013 Author Share Posted March 14, 2013 it wont delete any of the data on server right Quote Link to comment
sureguy Posted March 14, 2013 Share Posted March 14, 2013 No - it will just test your memory. Quote Link to comment
mur.616 Posted March 15, 2013 Author Share Posted March 15, 2013 came up as passed. no erros. Quote Link to comment
dgaschk Posted March 15, 2013 Share Posted March 15, 2013 See here:http://lime-technology.com/forum/index.php?topic=9880.0 Quote Link to comment
tcharron Posted March 16, 2013 Share Posted March 16, 2013 hi im getting the nobody card disabling IRQ 16 error. it happens about 5 minutes after transferring general or sooner. when it happens write speeds go from 80mb/s to 2-3 mb/s IRQ 16 is a USB port and i have stopped using it. still happens this all started after i had my power supply fail. have had server for about 2 years no problems. i am runnign 5.0 rc11 no add ons anymore here is the system log I had this problem, but it only manifested when I used my KVM box to switch machines. I think that it was causing some garbage to be dumped to the USB port as the keyboard/mouse were disconnected from the box when I switched away from it. I "solved" this problem by simply plugging my keyboard and mouse into a different USB port. Don't quote me on this, but I think that each usb port (or pair of usb ports) uses a different IRQ, so moving it to a different port caused the problem to move to an IRQ that was not shared by anything important like my disk controller. Quote Link to comment
Guest Posted February 8, 2014 Share Posted February 8, 2014 Hello, I'm getting also the 'disabling IRQ #16' error. The System slows then also down. Trying a different USB Port did not solve the Problem. I have tryed all Ports on the Mainboard and also an aditional USB PCIe Card. Always, after switching to a nother PC and then returning to the UnRaid System ( running 5.0.5 ) the IRQ #16 is disabled. The KVM is an ATEN CS64US USB KVM UnRaid System: MB Asus P8 H77-M Pro with 8GB Ram and two Supermicro AOC-SAS2LP-MV8. Any Help is welcome. cu Kyruss Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.